AGFA produces a wide range of imaging products, from classic film and digital cameras to modern portable photo printers and medical hardcopy systems.
AGFA (Agfa-Gevaert) is a historic Belgian-German multinational corporation with a long legacy in analogue and digital imaging products. Over the decades, AGFA has been renowned for its classic optical camerasāsuch as folding, pocket, and box camerasāas well as photographic films and developing equipment. Today, the AGFA brand spans everything from modern digital point-and-shoot cameras and Bluetooth smartphone mini printers (like the Realipix series) to high-end medical imaging and IT solutions, including the DRYSTAR diagnostic printers.
Whether you are a vintage photography enthusiast looking to thread film into an Agfa Chief or Optima Sensor, or a modern consumer configuring an AGFA portable photo printer via the smartphone application, the manuals and instructions here will help you get the best quality results from your imaging equipment.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Film loading in vintage models like the Agfa Chief should be done in subdued light. Open the camera back, remove the spool holder, thread the pointed end of the paper into the take-up spool, and turn the winding knob until the film is tight. Check your model's manual for specific instructions.
Turn on Bluetooth on your smartphone and power on the AGFA printer. Open your Bluetooth settings, search for 'Agfaphoto - XXXX' (where XXXX is a 4-digit code), and select it to pair. Once connected, use the Agfaphoto Realipix app to format and print your photos.
A white flickering light indicates it is printing. A pink flickering light means a firmware upgrade is in progress. A red flickering light signifies an error or a missing cartridge, while a green light indicates charging is complete or Bluetooth is connected.
Power the printer off and then turn it back on. The paper should automatically eject. If it doesn't, contact customer support. Do not pull the paper out by force during the printing process to avoid damaging the internal rollers.