Aero-Spa specializes in chemical-free ozone generator systems, filters, and water testing kits engineered to simplify and improve automatic hot tub and spa maintenance.
Aero-Spa, LLC offers innovative, chemical-free solutions for hot tub and spa maintenance. Specializing in advanced ozone generators, spa fill filter kits, and bacteria test kits, Aero-Spa products are designed to drastically reduce the need for harsh chemicals, saving owners time, money, and effort.
By utilizing continuous, automated ozone treatment, users can keep hot tub water naturally sanitized and clear. Furthermore, their product lineup includes easy-to-install kits that accommodate most standard outdoor spa sizes without complex plumbing modifications.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Set the equipment on a solid block at least 10 feet from the hot tub. Connect the 20-foot ozone tube to the generator, loop it over the edge of the tub, align it with the cover seam, and lower the sintered diffuser into the water to rest on the bottom.
No, for your safety, you should not use the hot tub for at least 30 minutes after the Aero-Spa unit has finished operating.
The diffuser stone can be gently cleaned by soaking it in a 3% hydrogen peroxide solution or muriatic acid, then thoroughly rinsing it.
A strong ozone odor may indicate the cycle run time is too long. Try reducing the cycle run time by 25%. If a strong odor remains after one hour, unplug the unit and contact Aero-Spa technical support.
Aero-Spa system serves as the primary water treatment, minimizing harsh chemical usage. However, following industry best practices to prevent cross-contamination, a minimal 1 PPM residual chlorine sanitizer should be continuously maintained.