ABQINDUSTRIAL Manuals & User Guides

ABQINDUSTRIAL 300-P-C Gel-filled pH Sensor Cartridge Owner’s Manual

December 26, 2025

Gel-filled pH sensor cartridge 300-P-C 300-P-C Gel-filled pH Sensor Cartridge ■ Conformable standards This equipment conforms to the following standards: EN50581 9. Monitoring and control instruments ■ Authorised representative in…

ABQINDUSTRIAL PT-130 Non-Contact Digital Tachometer Instruction Manual

December 5, 2025

ABQINDUSTRIAL PT-130 Non-Contact Digital Tachometer Instruction Manual Operation Manual CAUTION To Avoid Injury, do not point the light beam of the in-strument or have it reflected into the eyes of…

ABQINDUSTRIAL TNC Series Torque Cap Tester Instruction Manual

November 21, 2025

ABQINDUSTRIAL TNC Series Torque Cap Tester Product Usage Instructions If this is your first time using the gauge, connect the gaugeto the PC. Ensure the gauge is on to initiate…

ABQINDUSTRIAL TNC Series Torque Cap Tester Instruction Manual

November 20, 2025

ABQINDUSTRIAL TNC Series Torque Cap Tester Introduction Warning Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test.…

ABQINDUSTRIAL PT-131, PT-132 Contact Tachometers Instruction Manual

September 30, 2025

ABQINDUSTRIAL PT-131, PT-132 Contact Tachometers Caution Be careful of clothing or appendages getting too close to moving machinery when taking readings. Do not leave the device close to water or…

ABQINDUSTRIAL DT-362 LED Stroboscope Instruction Manual

September 30, 2025

ABQINDUSTRIAL DT-362 LED Stroboscope Caution Use in flammable environments is prohibited. Use in this manner may result in fire or explosion. Do not look directly into the LED light Source.…

ABQINDUSTRIAL ZEF Digital Tension Meter Instruction Manual

September 30, 2025

ABQINDUSTRIAL ZEF Digital Tension Meter Available Models The individual models of the ZE Series are also available with the following modifications (customized versions): Calibration to different materials   Model Tension…

ABQINDUSTRIAL WT-205 Wire Crimp Pull Tester User Guide

September 30, 2025

ABQINDUSTRIAL WT-205 Wire Crimp Pull Tester Specifications Model: WT-205 Product: Wire Crimp Pull Tester Maximum Capacity: 200 lbF (1,000 N) Product Usage Instructions Safety Precautions: Before operating the WT-205 Wire…

ABQINDUSTRIAL TI-25LTX Steel Only Ultrasonic Wall Thickness Gauge Instruction Manual

September 21, 2025

ABQINDUSTRIAL TI-25LTX Steel Only Ultrasonic Wall Thickness Gauge INTRODUCTION The Chicklike model TI-25LTX Ultrasonic Thickness Gauge accurately measures the thickness of steel. This gauge uses the “pulse-echo” principle of ultrasonic…

ABQINDUSTRIAL DeFelsko SPGOS3-G PosiTector SPG Surface Profile Gages Instruction Manual

May 9, 2025

ABQINDUSTRIAL DeFelsko SPGOS3-G PosiTector SPG Surface Profile Gages The PosiTector SPG CS is a surface profile gage that measures and records peak-to-valley surface profile heights on textured coatings. Compare PosiTector Gage…

EDMS Operation Manual: Install and Use ABQINDUSTRIAL Gauge Software

Operation Manual

Comprehensive operation manual for the EDMS software by ABQINDUSTRIAL, detailing USB driver installation, software setup, gauge connection, data acquisition, functions, and troubleshooting for the JM CDC DEMO gauge.

DT-362 LED Stroboscope Operation Manual | ABQINDUSTRIAL

manual

Detailed operation manual for the ABQINDUSTRIAL DT-362 LED Stroboscope. Covers specifications, features for speed and vibration analysis, and industrial applications. Learn how to use this portable, high-performance stroboscope.

ABQIndustrial ST-329 LED Stroboscope: High-Performance Speed Measurement

datasheet

Discover the ABQIndustrial ST-329 LED Stroboscope, a permanent mount strobo-scope array offering bright, stable light and precise speed measurements for industrial applications. Features wide flash range, long-life LEDs, and versatile…