CASSANDRA GOAD Ring Size Measurer

Please print this page to help you to find your ring size.
Do not change the scale or shrink to fit, print at 100% size/scale.

Instructions

1. Print this document at 100% size. Measure the line above to make sure the scale is accurate.
2. When you have ensured the scaling is accurate, cut out the ring measurer below with a pair of scissors or a cutting knife.
3. Make a slit in the ring measurer where indicated.
4. Carefully wrap the ring measurer around your finger, with the end of the band poking through the slit and the number scale uppermost.
5. The ring measurer should fit comfortably around your finger, adjust it gently if need be. Make sure you can remove the ring measurer over your knuckle. You may need to adjust your size to do this.
6. The number indicated by the ‘ring size’ in the slit is the ring size needed for your finger. Please take a photo of your finger with the ring measurer in position and send it to us to help with your ring sizing.
7. Please take care not to pull too tightly as this will give an inaccurate size.

Documents / Resources

CASSANDRA GOAD Ring Size Measurer [pdf] Instructions Ring Size Measurer, Ring Size, Size Measurer, Ring Measurer, Measurer

References

• User Manual