CASIO 3054 City Code Watch Owner’s Manual

CASIO 3054 City Code Watch

Product Usage Instructions

Setting DST (Daylight Saving Time)

1. Ensure the product is in Timekeeping Mode.
2. Press and hold the designated button until the city code starts to flash.
3. The DST setting screen will appear.
4. Use the appropriate button to cycle through DST settings (Auto/Off/On).
5. Press the designated button to confirm and return to Timekeeping Mode.

USING INSTRUCTION

DST Setting / Module: 3054

Firstly, make sure it is in the Timekeeping Mode.

• <Timekeeping Mode Screen>

To return to the Timekeeping Mode, press © several times.

1. In the Timekeeping Mode, hold down Ⓐ until the city code starts to flash.
2. Press © once. DST setting screen appears.
3. Press Ⓓ to change the DST Settings. (AUTO/OFF/ON)
4. Press Ⓐ to return to the Timekeeping Mode.

<Timekeeping Mode Screen>

FAQs

• Q: How do I know which DST setting to choose?
  • A: The recommended DST setting varies based on your location and local daylight saving time regulations. It is advisable to consult local authorities or the product manual for guidance.
• Q: What should I do if the city code does not start flashing?
  • A: Ensure you are in the correct mode and following the instructions correctly. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support.