“
Product Information
Specifications:
- Product Name: Casambi Push Button Coupler
- Inputs: 4 dry contact inputs
- Power Input: 100-240VAC, 50/60Hz
- Dimensions: 49.81mm x 43mm x 15.15mm
- Operating Temperature: -20°C to +40°C
- Working Humidity: 8% to 80%
- Waterproof Grade: IP20
- Warranty: 5 years
Product Usage Instructions:
Installation:
- Ensure all power sources are switched off before
installation. - Refer to the wiring diagram provided for proper connection of
live (L), neutral (N), and push button terminals (K1-K4). - Connect the common terminal (COM) to the grounding of the push
buttons. - Securely mount the Casambi Push Button Coupler in the desired
location. - Once installed, switch on the power sources and test the
functionality of the push buttons.
Functionality:
The Casambi Push Button Coupler allows for control through 4 dry
contact inputs. Each push button (K1-K4) corresponds to a specific
function or setting, providing a convenient way to interact with
connected devices.
Maintenance:
Regularly check for loose connections or signs of wear. Clean
the device with a dry cloth to prevent dust accumulation.
Frequently Asked Questions (FAQ):
A: To reset the device, disconnect the power source, wait for a
few seconds, and then reconnect the power.
A: No, the device has an IP20 waterproof grade and is
recommended for indoor use only.
“`
Casambi Push button Coupler
Important: Read All Instructions Prior to Installation Function introduction
43.00 mm
4 dry contact inputs
K4 K3 COM K2 K1
Casambi 4 Dry Contact Inputs Input:100-240VAC ,50/60Hz Ta:-20-+50
49.81 mm
LN
100-240VAC power input
15.15 mm
Product Data Protocol
Power Supply Contact
Dimensions Operating Temperature
Working Humidity Waterproof Grade
Warranty
Casambi 100-240VAC 4 dry contacts 49.81x43x15.15mm 0 ~ +40
8% ~ 80% IP20
5 years
· Casambi push button coupler · 4 dry contacts, can connect to 4 push buttons · Mesh network, which has a much longer control distance, transmits received signals to neighboring devices · The range for wireless communication is about 50 meters in typical indoor environment, actual range is dependent on field installation · Button function can be freely configured by Casambi app to control a luminaire, a group, an element, a scene, whole network, etc · Waterproof grade: Ip20 · 5 years warranty
Safety & Warnings · DO NOT install the device with power applied. · DO NOT expose the device to moisture.
Wiring Diagram
Notes for the diagrams: L – terminal for live lead input N – terminal for neutral lead input K1-K4 – terminals for push buttons COM – common terminal for grounding to the push buttons connected to the coupler
PUSH Button 4
PUSH Button 3
PUSH Button 2
PUSH Button 1
K4 K3 COM K2 K1
Casambi 4 Dry Contact Inputs Input:100-240VAC ,50/60Hz Ta:-20-+50
LN
L N
Configure push button function via Casambi APP Step 1: Open the Casambi app and add the coupler to your Casambi network. After a successful addition, the coupler will be shown in the Switches view. Step 2: In the Switches view, tap the coupler to configure its button functions. Four push buttons are available for configuration. Each button can be configured to control a luminaire, a group, a scene, an element or all luminaires. Step 3: After configuration, both the push button and the app can control the lighting. Note: Please refer to the Casambi App User Manual for more detailed instructions if needed.
Documents / Resources
 |
Casambi SR-CS2833PAC Push Button Coupler [pdf] User Manual SR-CS2833PAC, SR-CS2833PAC Push Button Coupler, SR-CS2833PAC, Push Button Coupler, Button Coupler, Coupler |