Carlinkit CCPA Wireless CarPlay Dongle Android Head Unit

INSTRUCTION MANUAL

Please read this instruction manual carefully before using the product, and keep it properly https://carlinkitcarplay.com/

Connection diagram

CarPlay connection

Android Auto connection (Optional function)

Product specifications

• Power input:5V===1A Power output:5V== -1A
• Power consumption:0.75W •
• Compatible resolution:

screen ratio
resolution ratio	800*480 / 1024″600 I1280*720 I 1920*1080	768*10241800″1280 1080*1920	1280*480

Application scope

• Support iPhone 6 and above models, applicable to iOS 10and abovel
• Support Android 9.0 and above mobile phones, some Android mobile phones require Android 11.0 and above
• Supported car models Android system navigation host, Android version 4.2 or above

APK installation method 1

1.  Plug in the car and wait for the U disk mode to appear on the screen, then open the ES file browser or file manager
2. Pop up (storage01) to install and download the APK
3. Click to open the installation
4. The installation is complete

Note:

1. The above operations need to ensure that the car is connected to the network
2. If the U disk mode does not appear after the box is plugged in for about 30 seconds, connect the mobile phone to the box WiFi(signal with the prefix auto), password12345678,enter 192.168.43.1 with the browser that comes with the phone, enter the background – restore factory settings

APK installation method 2

Apk download address: http://121.40.123.198:8080/AutoKit/AutoKitank|

1. Enter the download address on your computer browser, download the APK on your computer and conv it to a LISR flash drive
2. Insert the U disk into the USB interface of the car, find the U disk directory in the ” File Manager”, and click the APK file to install it.

APK installation method 3

1. Click the browser on the car, enter the download link, and download APK.
2. Click the ” Download Directory” to find the downloaded APK file and click Installation

USB data cable connection (CarPlay / Android Auto)

1. Insert the product into the car’s USB port
2. Connect iPhone / Android phone to the product by data cable, you can realize wired CarPlay / wired Android Auto
   (Note: it is recommended to use the original date cable / high-quality third party date cable / MFi certified date cable)

Wired Screen Mirroring Connection (Only iPhone)

1. First click into the APK and insert the product into the car’s USB port, then click the button at the top left to enter the “settings”
2. Select “Mirror” in “iPhone Mode”
3. Use the data cable to connect the mobile phone and the product to realize the Screen Mirroring function

(Optional function) Connection instructions for wireless Carplay

1. First click into the APK and follow the prompts to insert the product into the car’s USB port.
2. Open the mobile phone WiFi and Bluetooth,find AutoKit signal on the Bluetooth interface,click and confirm to use CarPlay.

(Optional function) Connection instructions for wireless Android Auto

1. From the Google Play to download and install Android Aut
2. Check the Android Auto operating environment. And Updat Google services.
3. Turn on Bluetooth and connect. ( Note: Check if your phone supports wireless Android Auto)

https://carlinkitcarplay.com/

Documents / Resources

Carlinkit CCPA Wireless CarPlay Dongle Android Head Unit [pdf] Instruction Manual CCPA Wireless CarPlay Dongle Android Head Unit, CCPA, Wireless CarPlay Dongle Android Head Unit, Dongle Android Head Unit, Android Head Unit, Head Unit

References

• User Manual