Cardo System SC EDGE Mesh Bluetooth Communication System
Specifications
- Bluetooth Specifications: Bluetooth 2.4-2.48 GHz / max output power 19.5dBm
- CAN ICES-3 (B)/NMB-3 (B) Zigbee Specification: 2.4-2.475GHz/max output power 16.00dBm
Product Information:
The SC EDGE is a versatile remote control device that operates using Bluetooth and Zigbee technologies. It complies with FCC, CE, and Industry Canada regulations for safe and efficient operation.
Product Usage Instructions
Safety and Compliance:
Before using the SC EDGE, please ensure that you have read and understood all safety guidelines provided in the user manual.
Pairing the Device:
- Ensure that the device you wish to control is compatible with Bluetooth or Zigbee technology.
- Activate the SC EDGE by pressing the power button for 5 seconds until the LED indicator starts blinking.
- Open the Bluetooth or Zigbee settings on your device and search for available devices.
- Select “SC EDGE” from the list of available devices to pair the remote control.
Operating the Device:
- Once paired, you can use the SC EDGE to remotely control compatible devices within the specified range.
- Refer to the user manual for specific instructions on how to use each function of the remote control.
Scan the QR code for more information
Bluetooth Specifications: Bluetooth 2.4-2.48 GHz / max output power 19.5dBm CAN ICES-3 (B)/NMB-3 (B) Zigbee Specification: 2.4-2.475GHz/max output power 16.00dBm
SC EDGE CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antennae
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF EXPOSURE STATEMENT
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
- The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
- When equipped, the distance between antenna and one’s head surface is Minimum 22mm
FCC CAUTION
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
CE DECLARATION OF CONFORMITY
This product is CE marked according to-the provisions of the Radio Equipment Directive (2014/53/EU). Hereby, Cardo Systems declares that the radio equipment type SC Edge is in compliance with Directive 2014/d53/EU. For further information, please consult
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. Product: SC EDGE
- Model: SC EDGE
- RF Range for Bluetooth: 2402 — 2480 MHz
- Max Output Power(E.I.R.P.) for Bluetooth: 19.5dBm
- RF Range for DMC: 2405 – 2475 MHz
- Max Output Power(E.I.R.P.) for mesh: 11dBm
- UK DECLARATION OF CONFORMITY
Hereby, Cardo Systems declares that the radio equipment type SC EDGE is in compliance with Radio Equipment Regulations 2017.
- For further information, please consult https://cardosystems.com/pages/support/sc-edge
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
- Product: SC EDGE
- Model: SC EDGE
- RF Range for Bluetooth: 2402 — 2480 MHz
- Max Output Power(E.I.R.P.) for Bluetooth: 19.5dBm
- RF Range for DMC: 2405 – 2475 MHz
- Max Output Power(E.I.R.P.) for mesh: 11dBm
- When equipped, the distance between antenna and one’s head surface is Minimum 22mm
INDUSTRY CANADA STATEMENT
This radio transmitter (identify the device by certification number) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
INDUSTRY CANADA RF EXPOSURE STATEMENT
This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure limits, human proximity to the antenna shall not be less than 22 mm (0.87 inches) during normal operation.
BLUETOOTH LICENSE
- The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cardo Systems is under license. Other trademarks and trade names are those of their respective owners.
- The product is compliant with and adopts the Bluetooth® Specification 5.2and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other
- Bluetooth®-enabled products is not guaranteed.
- WEEE (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling.
DATA PROTECTION NOTICE:
WEEE often contains sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the WEEE that is to be disposed of.
SC EDGE REMOTE CONTROL
CERTIFICATION AND SAFETY APPROVALS FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antennae
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RF EXPOSURE STATEMENT
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
- The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
- When equipped, the distance between antenna and one’s head surface is minimum 22mm
FCC CAUTION
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
CE DECLARATION OF CONFORMITY
- This product is CE marked according to-the provisions of the Radio Equipment Directive (2014/53/EU).
- Hereby, Cardo Systems declares that the radio equipment type SC EDGE Remote Control is in compliance with Directive 2014/53/EU. For further information, please consult https://cardosystems.com/ pages/support/sc-edge
- This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
- Product: SC EDGE Remote Control
- Model: SC EDGE Remote Control
- RF Range for Bluetooth: 2402 — 2480 MHz
- Max Output Power(E.I.R.P.) for Bluetooth: -7 dBm
UK DECLARATION OF CONFORMITY
Hereby, Cardo Systmes declares that the radio equipment type SC EDGE Remote Control is in compliance with Radio Equipment Regulations 2017.
- For further information, please consult https://cardosystems.com/ pages/support/sc-edge
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. Product: SC EDGE Remote Control
- Model: SC EDGE Remote Control
- RF Range for Bluetooth: 2402 — 2480 MHz
- Max Output Power(E.I.R.P.) for Bluetooth: -7 dBm
INDUSTRY CANADA STATEMENT
- This radio transmitter (identify the device by certification number) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
- This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
INDUSTRY CANADA RF EXPOSURE STATEMENT
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
- The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
- When equipped, the distance between antenna and one’s head surface is minimum 22mm
BLUETOOTH LICENSE
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cardo Systems is under license. Other trademarks and trade names are those of their respective owners. The product is compliant with and adopts the Bluetooth® Specification 5.2 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling.
- Charging temperature: Battery charging temperature limits: 0° – 40°C (32°-104°F)
- AC/DC Adapters: When charging from a wall outlet, make sure that the plug-in AC/DC adapter meets the following criteria:
- Input: 100-240 V, 50/60 Hz, 0.2 A maximum Output: 5 V DC, 1 A maximum.
SAFETY PRECAUTIONS
Please ensure that the product is properly used by observing the safety precautions below to prevent any risk of serious injury, death and/or damage to property.
HAZARD ALERT SIGNAL WORDS
The following safety symbols and signal words are used in this manual.
WARNNING
Indicates a potential hazardous situations that, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potential hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related. If not avoided, it could cause damage to your product.
NOTE
Notes, usage tips, or additional information
PRODUCT USE
Observe the following precautions to avoid injury or damage to your product while using the product.
WARNING
- Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability.
- Careless use of the product on the road is risky and may result in serious injury, death or damage. You must read all safety precautions in all documents that come with this product. This will help minimize the chance these risks may occur while riding.
- In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents.
- Before riding, fasten the product from the helmet, and double-check that it is properly fastened. Separation of the product while riding will cause damage to the product and may result in an accident.
- When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds, ATVs, or quadbikes (hereinafter called “transportation means”), you need to follow the safety precautions provided by the manufacturer of the vehicle.
- When you use the product, use good judgment; never use it under the influence of alcohol or drugs or when you are extremely tired.
- Take all necessary precautions and remain alert to the traffic, weather and all road conditions. Do not perform pairing, linking or any complex operations while riding.
CAUTION
- If the product emits an unusual smell, feels hot, or appears abnormal in any other way while using or charging, stop using it immediately. It may cause damage, explosion, or fire. Contact your sales location if any of these problems are observed.
- Do not use the product in an explosive atmosphere. If you are in such a location, turn off the power and heed any regulations, instructions, and signs in the area.
Health Warnings:
- Hearing Loss: Audio devices can cause hearing loss. Employ care and avoid exposure to excessive volume levels that may damage or impair hearing or lead to hearing loss. Permanent hearing loss may occur if Products are used at high volume for prolonged periods.
- RF Signals: Most electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals emanating from your wireless equipment.
- Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of about six inches (or 16 cm) to be maintained between a mobile phone or wireless device and a pacemaker to avoid potential interference with the pacemaker. Be sure not to interfere with the functionality of personal medical devices.
- Hearing Aids: Some devices may interfere with certain hearing aids. In the event of such interference, you should consult your hearing aid manufacturer to discuss alternatives.
- Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device and/ or your physician
to determine if it is adequately shielded from interference caused by external RF energy. Your physician may be able to assist you in obtaining this information.
NOTICE
- The charging LED is not a pin-hole reset button. Do not press the charging LED. It will damage the product or its internal electronic circuits.
- In some regions, it is prohibited by law to ride motorcycles while wearing headsets or earbuds. Therefore, be certain you are aware of all relevant laws in the region where you are using the product and are sure that you comply with them.
- The headset is for motorcycle helmets only. To install the headset, you must follow the installation instructions shown in the User’s Guide.
- Do not impact the product with sharp tools as this may damage the product.
- Keep product away from pets or small children. They may damage the product.
- Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the limited warrant’ to operate the equipment.
BATTERY
Your product has a built-in battery. Be careful to read all safety information in this guide. Failure to carefully observe the safety precautions can cause battery heat generation, bursting, fire and serious personal injury.
WARNING
- Do not use the product in direct sunlight for a long period of time. Doing so can damage the product and generate heat that can cause burns.
- Do not use or store the product inside motorbikes/cars in hot weather. It may cause the battery to generate heat, rupture, or ignite.
- Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, explode, or ignite.
- Do not leave the product near open flames. Do not dispose of the product in a fire. It may cause the battery to become hot, explode, or ignite and cause serious injury.
- Never attempt to charge a battery with the charger which has been physically damaged. It may cause explosion and/or accidents.
- Do not tamper with batteries as there is a risk of explosion if the battery is replaced by an incorrect type.
NOTICE
Battery life may vary depending on conditions, environmental factors, number of recharges, functions and features of the product in use, and devices used with it, as well as the aging of the device from the moment of purchase.
PRODUCT STORAGE AND MAINTENANCE
Take the following precautions to avoid personal injury or damage to your product while storing and maintaining the product.
CAUTION
- Do not dispose of the product with household waste. The built- in battery is not to be disposed of in municipal waste stream and requires separate collection. Disposal of the product should be done in accordance with the local regulations.
NOTICE
- Keep the product free of dust. Dust may damage mechanical and electronic parts of the product.
- The product should be stored at room temperature. Do not expose the product to extremely high or low temperature as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product.
- Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product.
- Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.
- Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.
- Do not tamper with, disassemble, or modify the product (not by an authorized person to make repairs) as this may damage the product and invalidate the product warranty.
- Do not store the product in humid environments especially for long periods of time. It may damage the internal electronic circuits.
- Battery performance will deteriorate over time if stored for a long period of time without being used.
- In case of long-term storage, the batteries should be charged every 6 months for maintenance. Storing the product for more than 6 months without charging the battery may cause irreversible damage to the capacity of your battery.
- Clean the communicator with a soft, lint-free cloth dampened in an electronic-safe solution, avoiding abrasive materials, and power off before cleaning.
LIMITED PRODUCT WARRANTY DISCLAIMERS, AND LIMITATIONS
LIMITED WARRANTY
SCHUBERTH and CARDO guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. the product warranty extends to the product only. SCHUBERTH and/or Cardo will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
WARRANTY PERIOD
SCHUBERTH guarantees free-of-charge replacements of defective parts of the product or flaws that have occurred due to problems in manufacture for a period of 2 years from the date of initial purchase.
TERMINATION
The warranty of the product becomes effective on the date of initial purchase. In addition, the warranty of the product expires when the warranty period expires. However, in the following cases, the warranty will be terminated prematurely.
- In the event the product has been sold or transferred to a third party.
- In the event the manufacturer’s name, serial number, product label, or other markings have been modified or removed.
- ln the event any unauthorized person has tried to disassemble, repair, or modify the product.
NOTICE AND WAIVER
By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and conditions of this agreement, return the product for a refund.
- You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional request for any suit, claim, implementation, redemption or similar action from SCHUBERTH and Cardo with regard to any occasion such as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the use of this product.
- You must completely understand and accept all risks (including those occurring due to any careless behavior of yours or others) which may occur during the use of this product.
- You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition to use any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely.
- You must be an adult who can take responsibility for using the product.
- You must read and understand the following warnings and alerts:
- SCHUBERTH and Cardo together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and suppliers, sole sellers of SCHUBERTH and Cardo(collectively referred to as “the company”) recommend that, before using the product and similar devices of any brands including its derivative models, you collect any relevant information in advance and be entirely prepared in terms of weather, traffic situation, and road conditions.
- When you use the product while you are operating any vehicle or equipment such as motorcycles, scooters, mopeds, ATVs, or quad-bikes (hereinafter called as “transportation means”), you must take complete caution regardless of the location of such operation.
Use of the product on the road may cause such risks as fracture, serious disability, or death.
- Risk factors, which may occur when you use the product may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing.
- Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product.
When you use the product, use good judgment; never use it under the influence of alcohol.
- You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights.
WARRANTY EXCLUSIONS
REASONS FOR LIMITED LIABILITIES
If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney’s fees). Therefore, SCHUBERTH and Cardo will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product. Further, SCHUBERTH and/or Cardo will not be liable for any substantial damage not related to the condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility.
LIMITATION OF LIABILITY
TO THE FULL EXTENT ALLOWED BY LAW, SCHUBERTH AND/OR CARDO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SCHUBERTH AND/OR CARDO ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT SCHUBERTH’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SCHUBERTH AND/OR CARDO OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER.
LIABILITIES DISCLAIMER
In addition to damages which may occur due to the use of the product, SCHUBERTH and Cardo will not be liable for damages of the product which occur due to the following events.
- In the event the product is misused or used for purposes other than its intended purposes.
- In the event the product is damaged because the user does not follow the content of the product manual.
- In the event the product is damaged because it has been left unattended or has undergone any other accident.
- In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer.
- In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual.
- In the event the product is damaged by a third party.
- In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster).
- In the event the surface of the product is damaged by use.
WARRANTY SERVICE
- To obtain product warranty service, send the defective product, at your expense, to the seller along with proof of purchase (a receipt that shows the purchase date, and other relevant information). Take necessary measures to protect the
- product. In order to get a refund or replacement, you must include the whole package as it was purchased.
FREE-OF-CHARGE SERVICE
- SCHUBERTH will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period.
Schuberth customer Service details:
- SCHUBERTH GmbH – Customer Service
- Stegelitzer Strasse 12
- 39126 Magdeburg, Germany
The SC Edge is approved according to ECE 22.06 for the following SCHUBERTH helmets:
Here’s the information formatted in bullet points:
- Helmet Model: C5
- Approval Number: 0610510
- Helmet Model: E2
- Approval Number: 0610510
- Helmet Model: C5 Carbon
- Approval Number: 0610596
- Helmet Model: E2 Carbon
- Approval Number: 0610596
- Helmet Model: S3
- Approval Number: 0610579
- Helmet Model: J2
- Approval Number: 0610632
- Importer in Europe: SCHUBERTH GmbH
- Stegeliter Strasse 12, 39126 Magdeburg, Germany
- Importer in IJK: Tran Am Ltd
- William House, Gore Road
- GB BH25 6RJ New Milton Hants
- Importer in US: SCHUBERTH North America 9920 Pacific Heights Blvd., Suite 150, San Diego, CA 92121
FAQs
Q: What should I do if the SC EDGE is not pairing with my device?
A: Make sure that the SC EDGE is in pairing mode and that your device's Bluetooth or Zigbee settings are turned on. You may need to consult the troubleshooting section of the user manual for further assistance.
Documents / Resources
 |
Cardo System SC EDGE Mesh Bluetooth Communication System [pdf] User Manual Q95ER32, Q95ER32, er32, SC EDGE Mesh Bluetooth Communication System, SC EDGE, Mesh Bluetooth Communication System, Bluetooth Communication System, Communication System |