CANOPIA Screen Door Kit Instruction Manual

CANOPIA  Screen Door Kit

Product Information: Screen Door Kit

The Screen Door Kit is a product compatible with Palram-Canopia’s San Remo, Garda & Ledro. The kit includes all necessary components required to assemble a screen door, including panels, frames, and hinges. This product is recyclable and comes with a set of instructions for proper assembly.

Product Usage Instructions: How to Assemble Screen Door Kit

1. Before starting the assembly process, carefully read the instructions included in the kit. Keep these instructions in a safe place for future reference.
2. Identify the type of product you have – Veranda/Sun Remo/Garda or Ledro.
3. Refer to the assembly diagram provided for your specific product type.
4. For Veranda/Sun Remo/Garda:
   1. Attach panel (1) to frame (2) using screws (b).
   2. Attach hinges (c) to frame (2) using screws (b).
   3. Attach frame (2) to door jamb by screwing left (L) and right (R) hinges into place.
5. For Ledro:
   1. Attach panel (1) to frame (3) using screws (b).
   2. Attach hinges (c) to frame (3) using screws (b).
   3. Attach frame (3) to door jamb by screwing left (L) and right (R) hinges into place.
6. The screen door is now assembled and ready for use.

If you have any concerns or questions about the product, please refer to the contact information provided in the user manual.

HAVE A CONCERN?
WE CAN HELP.
Before returning your purchase:

You didn’t find what you were looking for?
We can help at canopia.shop/support

Still can’t find what you are looking for?
Please see next page for local customer care.

SCAN ME

WE ARE HERE TO HELP
For general questions: canopia.com/contact-us

• NORWAY
• SWEDEN
• ARGENTINA
• GREECE
• GREENLAND
• ICELAND
• ESTONIA
• JAPAN
• LATVIA
• LITHUANIA MAURITIUS
• MEXICO
• ROMANIA
• RUSSIA
• TURKEY
• UZBEKISTAN
• UKRAINE
• SWAZILAND
• KOREA

FOR VERANDA

FOR LEDRO