Canon Printer
Canon Printer
MODEL: G1020series
Read Safety and Important Information (addendum)first.
Holding the Printer
Setting Up the Printer
For Setup, visit the URL https://ij.start.canon
or scan the code with your mobile device
- Follow the instructions below if you do not have an internet connection.
Box Contents
- Print Heads
- Ink Bottles
- Power Cord
- Setup CD-ROM
- Safety and Important Information
- Getting Started (this manual)
Removing Packing Materials
https://rs.ciggws.net/rd2.cgi?FNC=GSQB_MOV&DEV=G1020%20series&CTN=MOV%2Fprotective_material.html
- Remove and dispose of any packing materials and orange tape.
- Open the top cover, remove and dispose of the orange tape and protective material inside.
Installing the Print Heads
https://rs.ciggws.net/rd2.cgi?FNC=GSQB_MOV&DEV=G1020%20series&CTN=MOV%2Fprint_head.html
- Open the print head locking cover.
- Take out each print head from the package and remove the label.
- Remove the protective tape.
- Insert the C )color( print head on the left and the B )black( print head on the right.
- Close the print head locking cover and press down until it clicks.
- Press down both joint buttons completely until they click.
- Close the top cover.
Turning on the Printer
https://rs.ciggws.net/rd2.cgi?FNC=GSQB_MOV&DEV=G1020%20series&CTN=MOV%2Fpower.html
- Connect the power cord.
- Press the ON button.
The ON lamp lights.
Important: If the Alarm lamp flashes or lights see “If the Alarm lamp flashes or lights” on page 4 and follow the instructions.
Flashing
Pouring Ink
https://rs.ciggws.net/rd2.cgi?FNC=GSQB_MOV&DEV=G1020%20series&CTN=MOV%2Fpour_ink.html
Important
This product requires the careful handling of ink. Ink may splatter when the ink tanks are filled with ink. If ink gets on your clothes or belongings, it may not come off.
- Open the top cover.
- Open the tank cap on the left of the printer.
- Hold the ink bottle upright and gently twist the bottle cap to remove.
- Align the nozzle of the ink bottle with the inlet.
- Slowly stand the ink bottle upside down and push down to pour the ink.
- If the link does not pour, gently remove the ink bottle and try again.
- Gently remove the ink bottle from the inlet.
- Be careful not to spill the ink.
- Replace the tank cap securely.
- Repeat steps 2 through 7 to pour all ink into the corresponding ink tanks on the right.
- Close the top cover.
- Press the OK button.
- The ON lamp flashes and the ink system preparation starts. It takes about 5 minutes to complete.
Proceed to the next page.
If the Alarm lamp flashes or lights
Count the number of flashes.
- 9 times
Protective material remaining.“2. Removing Packing Materials” on page 1 - 4 times
Print heads are not installed correctly.“3. Installing the Print Heads” on page 1 - 5 times
Print heads cannot be recognized.“3. Installing the Print Heads” on page 1 - The ON lamp and Alarm lamp flash alternately 8
times
Ink system preparation was not completed successfully. Press the ON button to restart the printer, and then see “5. Pouring Ink” on page 3.
For all other cases, refer to the Online Manual.
Connecting to a Computer
If you are using multiple computers, perform these steps on each computer.
https://rs.ciggws.net/rd2.cgi?FNC=GSQB_MOV&DEV=G1020%20series&CTN=MOV%2FUSB_connection.html
- Access the Canon website from your computer.
https://ij.start.canon - Select
Set Up. - Enter your printer’s model name and click Go.
- Click Start.
- Click (B) Connecting to a Computer.
• The following steps are for Windows users. - Click Download.
- Run the downloaded file.
- Follow the on-screen instructions.
- This may take some time.
Using the Setup CD-ROM
Double click EasySetup.exe in the CD-ROM, and then continue from step 3. If you do not have an internet connection, open the win folder in the CD-ROM and double click SETUP.exe. This will install
Loading Paper
- Extend the paper support.
- Open the feed slot cover and slide the right-hand side paper guide to the far right.
- Load several sheets of paper with the print side facing up and slide the side paper guide against the edge of the paper stack.
- Close the feed slot cover.
- Extend the paper output tray.
Transporting Your Printer
When relocating the printer, check the following. Refer to the Online Manual for details.
Check that both joint buttons are pressed down completely to avoid ink leaks.
Check that the position of the ink valve lever is closed.
Pack the printer in a plastic bag in case ink leaks.
- Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
- Do not tilt the printer. Ink may leak.
- Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as the printer may be damaged and ink in the printer may leak.
- When a shipping agent is handling transport of the printer, have its box marked “THIS SIDE UP” to keep the printer with its bottom facing down. Mark also with
“FRAGILE” or “HANDLE WITH CARE”.
Trademarks
- Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Access Online Manual
From your browser
DOWNLOAD RESOURCES
- Canon Printer [pdf] User Guide Printer G1020
FAQ’S
Managing the Printer Power
Open Canon IJ Printer Assistant Tool.
Perform power off. Click Power Off. When the confirmation message appears, click OK. The printer power switches off.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Ever wonder why your prints sometimes appear faded or streaky? It’s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Download the file. For the location where the file is saved, check the computer settings. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
If ink is not coming out when you perform printing for the first time, it is possible that ink is not flowing into the printer properly. Make sure each ink tank is filled with ink to its upper limit and perform ink flush. If the problem is not resolved yet, the print head may be damaged.
The printer with the supplied ink can give you a total yield of a whopping 7,000 pages (estimated prints per three cartridges combined, ISO standard).
Dura-Jet GI 790 Ink for Canon G2010, G2000, G2012, G1010, G1000, GM2070, G3010, G3000 Ink Tank Printer (C, M, Y, K) – PA0756 Black + Tri Color Combo Pack Ink Bottle.
Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.
Three flashes: Front Tray or Front Feed Support is closed./Paper jams. If the Front Tray is closed, open it. The printer resumes printing.
The G1024 series is a model with a USB interface. It does not support the LAN interface.
There are two bottles of ink included in this package; one for black and one for color. They are both for this printer.
The black print head prints only black, while the color print head prints in color.
VIDEO
www://canon.co.uk/
Documents / Resources
 | Printer |
References
- ij.start.canonij.start.canon
- User Manualmanual.tools
Peace
I purchased a Canon MAXIFY GX6040 printer
I would be happy to receive an explanatory guide in Hebrew for the functions of the printer
Thanks in advance
שלום
רכשתי מדפסת קנון דגם MAXIFY GX6040
אשמח לקבלת מדריך הסבר בעברית לפונקציות של המדפסת
תודה מראש
I purchased a Canon MAXIFY GX6040 printer
I would be happy to receive an explanatory guide in Hebrew for the functions of the printer
Thanks in advance<e/em>
שלום
רכשתי מדפסת קנון דגם MAXIFY GX6040
אשמח לקבלת מדריך הסבר בעברית לפונקציות של המדפסת
תודה מראש
Where can I find a Hebrew user manual for the Canon MAXIFY GX6040 printer?
While the printed manual provided in the context includes several languages (English, Spanish, Portuguese, French, Russian, Ukrainian, and Arabic), it does not contain a full Hebrew section. However, Canon provides comprehensive digital support for the MAXIFY GX6040.
To access the official Hebrew guide and setup instructions, please follow these steps:
If you require a physical Hebrew manual, it is often included as a separate insert in the box for units sold specifically in the Israeli market. If it was missing, you can use the browser's translation feature on the Online Manual link provided above.
Read the full Q&A page
Instructions can be found on many topics related to copying, but the simplest one, i.e. taking a copy, cannot be found on the docker’s page on the glass tray. Experimentation, waste of paper and nerve-wracking work
Ohjeita näkyy löytyvän monesta kopiointiin liittyvästä aiheesta mutta yksinkertaisin eli kopion ottamisesta lasialustalla olevasta dokkarin sivusta ei löydy. Kokeilua, paperin tuhlausta ja hermoja kyselevää hommaa
Ohjeita näkyy löytyvän monesta kopiointiin liittyvästä aiheesta mutta yksinkertaisin eli kopion ottamisesta lasialustalla olevasta dokkarin sivusta ei löydy. Kokeilua, paperin tuhlausta ja hermoja kyselevää hommaa
How do I make a copy using the glass tray on my Canon printer?
While the provided "Getting Started" guide focuses on initial hardware setup (ink, print heads, and connectivity), basic copying on most Canon printers using the glass tray follows these general steps:
For specific settings like paper size or density, Canon recommends referring to the Online Manual. You can access the full digital manual for your specific model by visiting https://ij.start.canon and entering your printer's model name.
Read the full Q&A page
printer Ina toa rangi haieleweki haotoi Black inachanganya shida ni nini?, nimechanganya wino kwa CD lakini bado haijalaa sawa shida ni nini naomba Msaada.
Why is my Canon printer not printing black ink correctly even after refilling, and why are the colors unclear?
Based on the Canon G1020 series manual and common MegaTank troubleshooting, if your printer is not producing black ink or the colors are unclear after refilling, please check the following:
If you mixed different types of ink manually (e.g., in a CD or external container) before pouring, this may have introduced air or contaminants. It is recommended to use only genuine Canon ink bottles designed for the MegaTank system to avoid clogging the print heads.
Read the full Q&A page