Canon E470 Printer Driver Instruction Manual

Canon E470 Printer Driver

Specifications

• Brand: Canon
• Model: [Model Name]
• Connection Type: USB
• Region: Asia> Hong Kong SAR China

Step 1: Preparation

1. Ensure that your computer has internet access.
2. Click on the software application to open it.

Step 2: Installation

1. Click “Next” to proceed.
2. Enter your login username and password (if prompted) and click “Install Software”.
3. Click “Start setup”.
4. Select the region as “Asia> Hong Kong SAR China” and click “Next”.
5. Click “Yes” to confirm.
6. Select either “Agree” or “Disagree” to participate in the Canon Extended Survey Program.
7. Select “USB Connection” and click “Next”. If the USB cable is already connected, disconnect it before proceeding.
8. Wait for the installation progress.
9. Connect the printer to the computer using a USB cable and turn on the printer. Wait for the printer to be detected.
10. If the printer is detected successfully, proceed to the next step.
11. Click “Execute” to perform print head alignment and then click “Next”.
12. After installation is completed, it is recommended to click “Execute” for a print test page. Click “Next”.
13. Complete the driver installation by clicking “Next”.
14. Select any additional software needed and click “Next”.
15. Select your preference for creating a user manual shortcut and click “Next”.
16. Wait for the installation progress to complete.
17. Click “Finish” to finalize the installation process.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

MAC OSX USB E470 E470 printer driver Installation Guide for MAC OSX via USB **: USB ** **Caution: Prior to the installation, please do not connect the USB port to avoid system error** The following steps and screens are for reference only, and the actual operation screens may vary depending on the device model, system, or software version. Driver download and Installation procedure Click below link to download printer driver: http://ij.start.canon/e470 1. Setup Click “Download”. Open the file after download is completed, and then click “Setup”
2. Ensure computer can access Internet, and then click “Open”
Click “Next”

4. Enter the login username and password (If this screen is shown below), and then click “Install Software”
2

5. Click “Start setup”
6. Select “Asia”> “Hong Kong SAR China”, and then click “Next”
3

7. Click “Yes”

E470 Printer Driver

8. Canon Select “Agree” or “Disagree” to send information to Canon Extended Survey Program
4

9. USB Select “USB Connection”, and then click “Next”
10. USB If the USB cable is connected to the printer, disconnect it. Click “Next”
5

11. Wait for the installation progress
12. USB Connect printer and computer with USB cable, and turn on the printer. Wait until printer is detected
6

13. Printer is detected successfully, please wait
14. Suggest to click “Execute” to perform print head alignment. Click “Next”
7

15. After installation is completed, we suggest to click “Execute” for print test page. Click “Next”
16. Driver installation is completed. Click “Next” to install software
8

17. Select needed software, and then click “Next”
18. Select “Agree” or “Disagree” to create a user manual shortcut, and then click “Next”
9

19. Wait for the installation progress
20. Click “Finish” to complete the installation

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
LEADTOOLS
Copyright (C) 1991-2009 LEAD Technologies, Inc.
CMap Resources
Copyright 1990-2009 Adobe Systems Incorporated.
All rights reserved.
Copyright 1990-2010 Adobe Systems Incorporated.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of Adobe Systems Incorporated nor the names
of its contributors may be used to endorse or promote
products derived from this software without specific prior
written permission.Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the “Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
The following applies only to products supporting Wi-Fi.
(c) 2009-2013 by Jeff Mott. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions, and the
following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the
following disclaimer in the documentation or other materials provided with the distribution.
* Neither the name CryptoJS nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.Loading Plain Paper / Photo Paper
You can load plain paper or photo paper.
Important
• If you cut plain paper into small size such as 4″ x 6″ (10 x 15 cm) or 5″ x 7″ (13 x 18 cm) to perform trial
print, it can cause paper jams.
Note
• We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see Supported Media Types.
• You can use general copy paper.
For the page size and paper weight you can use for this printer, see Supported Media Types.
1. Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
• Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
paper becomes completely flat.
For details on how to flatten curled paper, see Is the paper curled?.
2. Load paper.
1. Open the paper support.
2. Pull out the paper output tray and the output tray extension.The address is automatically rotated and printed according to the envelope’s direction by specifying with the
printer driver properly.
Important
• Printing of envelopes from a digital camera is not supported.
• Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.
• Envelopes with an embossed or treated surface
• Envelopes with a double flap
• Envelopes whose gummed flaps are already moistened and adhesive
1. Prepare envelopes.
• Press down on all four corners and edges of the envelopes to flatten them.
• If the envelopes are curled, hold the opposite corners and gently twist them in the opposite
• If the corner of the envelope flap is folded, flatter it.
• Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.
The figures above show a side view of the leading edge of the envelope.
Important
• The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make sure
that no curl or puff exceeds 0.12 inch (3 mm).
2. Load envelopes.
1. Open the paper support.
2. Pull out the paper output tray and the output tray extension.
29Replacing a FINE Cartridge
When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash to inform you of
the error. In this state, the printer cannot print or scan. Count the number of flashes and take appropriate
action.
IN An Error Occurs
Replacing Procedure
When you need to replace a FINE cartridge, follow the procedure below.
Important
• Do not touch the electrical contacts (A) or print head nozzle (B) on a FINE cartridge. The printer may
not print properly if you touch them.
(A)
(B)
• If you remove a FINE cartridge, replace it immediately. Do not leave the printer with the FINE
cartridge removed.
• Use a new FINE cartridge for replacement. Installing a used FINE cartridge may cause the nozzles to
clog.
Furthermore, with such a FINE cartridge, the printer will not be able to inform you when to replace the
FINE cartridge properly.
• Once a FINE cartridge has been installed, do not remove it from the printer and leave it out in the
open. This will cause the FINE cartridge to dry out, and the printer may not operate properly when it
is reinstalled. To maintain optimal printing quality, use a FINE cartridge within six months of first use.
• Note
• If a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever
ink remains, only for a while. However the print quality may be reduced compared to when printing
with both cartridges. We recommend to use a new FINE cartridge in order to obtain optimum
qualities.
Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of
the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the printer
cannot print.
For information on how to configure this setting, see below.
• For Windows:
M Setting the Ink Cartridge to be Used
–End-

10