Cambridge Audio Minx Min 22 Bookshelf Satellite Speaker
Installation guide
Supplied accessories
- key hole bracket
- terminals
- screw.
TECHNICAL SPECIFICATION
Read all instructions
-
- Avoid damp
- Secure all cables
- Avoid extreme temperatures
- Avoid direct sunlight
- Avoid solvent-based cleaners
- Avoid damp
Wall mounting
Connections
Positioning
-
- Before connecting, consider speaker placement and all cabling requirements. Some typical setups are shown here
- Position above or below screen, angled towards the listener if possible
- Before connecting, consider speaker placement and all cabling requirements. Some typical setups are shown here
Also available from your Cambridge Audio retailer
Pivot wall bracket
Floor stand
Table stand
DISPOSAL
The crossed-out wheeled bin is the European Union symbol for indicating separate collection for electrical and electronic equipment. This product contains electrical and electronic equipment which should be reused, recycled or recovered and should not be disposed of with unsorted regular waste. Please return the unit or contact the authorised dealer from whom you purchased this product for more information. This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, change without prior notice.
- Minx is a trademark of Cambridge Audio. All rights reserved.
- Copyright Audio Partnership Plc 2014
- Cambridge Audio is a brand of Audio Partnership Plc.
- Registered in England No. 2953313
FAQS
Cambridge Audio specs these from 25 to 200 watts each. 200 seems quite excessive but they are well made and probably could take it for short periods.
While we can’t speak to the sound quality of the Polk, one major advantage of the Min 12 is the BMR driver. The combination of flat panel technology with a traditional pistonic driver makes for a near 180 degree sound dispersal
Sorry, fixed automatic price setting.
We don’t recommend wiring multiple Min 12 or 22’s together. It would be best to connect a single Min 12 to a single speaker output on whatever amplifier or receiver you have. That being said, the Min 12’s are perfect for multi-channel setups.
We don’t recommend wiring multiple Min 12 or 22’s together. It would be best to connect a single Min 12 to a single speaker output on whatever amplifier or receiver you have. That being said, the Min 12’s are perfect for multi-channel setups. Thank you and we hope this helps.
The Cambridge Audio Minx Min 12 is not a powered speaker so you would need an amplifier and and another Minx Min 12 speaker for stereo
It only has one speaker so I would think no high pass filter. You can probably google to make sure. They are nice speakers. I use the as side speakers in a 5.1 surround system and they sound great and take up no floor space if you wall moun t them.
These brackets are held unto the unit via 1 screw, a similar bracket should be able to hold it but these aren’t standard by any means nor do we have a 3rd party suggestion to use
These are pretty good satellite speakers. Don’t expect any low frequency output. You may want to add a subwoofer for full range sound. Otherwise they sound pretty good.
The only other color of the Min12 grille that is available is black. There is no white grille available.
Yes, the Minx Min series of speakers are available in both black and white
“Yes we have some bananas.” It’s a clever but slightly confusing design. If you pull the binding post straight out of the back of the speaker it opens up a standard banana jack. This will take any single-type banana plug It will not accept the old Pamona dual bananas.
they might if you can mount them in a way that angles them toward the ceiling. However they weren’t designed for that purpose and they aren’t particularly “beamy” which is what you’d want from an upfiring speaker
We have the following wall brackets, Minx 400M, available: https://www.amazon.com/Cambridge-Audio-Minx-Speaker-Brackets/dp/B07KXZXKMK/ref=sr_1_20 dchild=1&keywords=cambridge+audio+minx&qid=1586188924&sr=8-20
These speakers connect to an amplifier using standard speaker wire. It can not accept HDMI directly. To use your HDMI output, you will need an amp that accepts the HDMI and outputs the amplified audio for speakers to use. Pretty much any home theater receiver will do this
