CALEX 4611907 LED Wall Lamp Cube
Specifications
| Article Number | 7001000000 |
|---|
Parts Supplied
- 1 x Light Fixture
- 2 x Wall Plugs
- 2 x Screws
Installation Instructions
- Step 1: Power Off
- Ensure the power is turned off at the circuit breaker.
- Step 2: Disassemble Fixture
- Use a screwdriver to disassemble the light fixture.
- Step 3: Mark Drill Points
- Mark the points on the wall where the fixture will be mounted.
- Step 4: Drill Holes
- Drill holes at the marked points using a 6mm drill bit.
- Step 5: Insert Wall Plugs
- Insert the wall plugs into the drilled holes.
- Step 6: Connect Wires
- Connect the wires according to the diagram:
- Blue wire to blue terminal
- Brown wire to brown terminal
- Step 7: Attach Fixture
- Secure the fixture to the wall using screws.
- Step 8: Assemble Fixture
- Reassemble the light fixture.
- Step 9: Power On
- Turn the power back on at the circuit breaker.
FAQs
- What tools are needed for installation?
- A screwdriver and a 6mm drill bit are required.
- How do I ensure safety during installation?
- Always turn off the power at the circuit breaker before starting the installation.
- What should I do if the light does not turn on?
- Check the wiring connections and ensure the power is on at the circuit breaker.
Company Information
- Calex Holland
- Electro Cirkel Retail B.V.
- Lyonstraat 29, 3047 AJ Rotterdam, The Netherlands
- Website: www.calex.eu.
Documents / Resources
 |
CALEX 4611907 LED Wall Lamp Cube [pdf] Installation Guide 4611907, 2d7b5bf7, 4611907 LED Wall Lamp Cube, 4611907, LED Wall Lamp Cube, Wall Lamp Cube, Lamp Cube, Cube |
