CAIWEI A6AB 4200-Lumen Wireless Android Projector

Warning

Warning:
Do not look directly into the light of the lens which could cause damage to your eyes, especially for children.
Do not place the projector on a wet surface, as this may result in an electric shock.
Please follow all warnings, precautions, and maintenance as recommended in this user’s guide.

Warm Notes: Please let your eyes and the projector have a rest every 3-4 hours, which will be good for both of you and the projector.

Warm tip:

1. As the projector is a class A product, it may cause electromagnetic interference.
2. Please do not put any liquid or heavy stuff on the projector.
3. To ensure good heat dissipation, please lift up the adjustable height stand on the bottom of the projector before turning on if you put the projector on a table or any other surface.

IMPORTANT SAFETY INSTRUCTION

• Do not block any ventilation openings. To ensure the reliable operation or the projector and to protect from overheating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a bookcase or a cabinet that restricts airflow. And clean all air filters once a month or clean when the air filters accumulate lots of dust.
  To reduce the risk of’ lire and/or electric shock, do not expose the projcctor to rain or moisture. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.
• Do not let objects or liquids enter the projcctor. They may touch dangerous voltage points and short out parts that could result in lire or electric shock.
• Do not use under the following conditions:
  • In extremely hot, cold or humid environments.
  • Ensure that the ambient room temperature is within S”C — 35″C
  • The relative humidity is 10% – 85%
    In areas susceptible to excessive <lust,<lirt and fog
    Near any appliance generates a strong magnetic field. In direct sunlight.
• Do not use the projector in places where flammable gases or explosives gases may be present in the atmosphere. The lamp inside the projector becomes very hot <luring operation and the gases may ignite and result in a lire.
• Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):
  • Unit has been dropped.
  • The power supply cord or plug has been damaged. Liquid has been spilled on to the projector. Projector has been exposed to rain or moisture.
  • Something has fallen in the projector or something is loose inside.
• Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the projector rnay become damaged.
• Do not block the light corning out of the projector lens when in operation. The light will heat the object and rny rnelt, cause bums or start a fire.
  Please do not open or disassemble the projector without professional instructions as this rnay cause electric shock.
• Only use attachments/accessories specified by the manufacturer.
• do not look into straight into the projector lens during operation. The bright light rnay harrn your eyes.
• When tum on the projector,plug the power cord first before switch on the power switch to avoid short circuit.
• Tum off and unplug the power plug from the AC outlet before cleaning the product.
• Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners, waxes or solvents to clean the unit.
• Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
• Do not setup the projector in places where it might be subjected to vibration or shock.
• Do not touch the lens with bare hands
• Remove battery/batteries from remote control before storage. If the battery/batteries are left in the remote for long periods, they may leak.
• Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it can adversely affect the quality of the projector performance.
• Please follow the correct projector orientation installation as nonstandard installation may affect the projector’s performance.
• Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.

Accessory List

• User Manual …………………………….. 1 pc
• Remote Control ………………………… 1 pc
• Power Cable …………………………….. 1 pc
• AV Signal Cable ………………………. lpc

Accessories which can be purchased separately:

1. Projection Screen
2. Ceiling Mount

INSTALLATION

To obtain best projection effect, please keep the projector away from direct sunlight or put down your curtains.

Standard Setting (Front Projection)
Please refer to the following table to adjust your picture size and distance. (From the lens to the screen).

Picture size (inch)	Projection distance
	16:9
30″	97cm	3.18feet
50″	153cm	5feet
60″	180cm	5.9feet
80″	240cm	7.87feet
100″	288cm	8.64feet

The optimum image size is 60-80 inches in diagonal dimension. Too small or too large projected image will lead to image not focusing well.
Please allow the measuring error of the above data to be±3%.

Installation Method
Please consult installation personnel for ceiling-mounted methods. Follow the instructions below for the correct projector positions.

warning

1. Please check the diagram below for vertical keystone correction.
2. This projector may be damaged beyond repair if it is incorrectly mounted on a ceiling or on a surface.
3. This projector should only be used in an environment where the temperature does not exceed the range of5°C-35°C. Projector malfunction may occur if this is not adhered to.
4. Malfunction may occur if the projector is placed under dusty, wet, moist or smoky conditions.
5. Poor ventilation condition will cause overheating which may damage or even ruin the projector.

Structural Diagram

1. Level adjustment
2. Vents
3. master switch
4. IR receiver
5. Focus
6. keystone correction
7. Mounting hole (screw hole size: M6)
8. Power button
9. Source (to choose the input signal)
10. Menu (to show up projector menu)
11. lndicator light (Red color: standby; Green / blue color: working)
12. Navigator buttons

Input Terminals

Interface 

No.	Name	Instruction	Function/Compatible devices	Required cable
	AV	Video input	DVD player,AV device ect.	AV cable or AV adapter cable
8	Audio Output	Connect external audio device	Earphone,speaker, sound bar ect.	3.5mm audio cable
@)	VGA	VGA signal input	Computer, laptop ect.	VGA cable
e	HDMT	HDMI signal input	DVD player,fire stick,apple TV, cable box,computer, laptop,game console ect.	HDMT cable
8	USB	Read USB device or connect mouse and keyboard	USB flash drive/hard drive, USB mouse, USB keyboard

Caution:
To avoid damage, connect the input signal cable correctly prior to switching on the projector.

REMOTE CONTROL INSTRUCTION

1. Power
2. Image Ratio
3. Navigator Buttons
4. Homepage
5. Menu (Doesn’t work in Android mode)
6. Volume Down
7. Menu
8. Image Flip
9. Source
10. Confirmation Key
11. Return
12. Volume Up
13. Mute

Turning On/Off

Turning on the projector: 

1. Install two new batteries into the remote control before use.
2. Plug power cable, the indicator light will turn red. (Note: You’d better plug the power cord to the projector firstly, then plug to the electrical outlet.)
3. Press the power button on the projector/remote, the indicator light will turn blue and keep blue.
4. After a few seconds, the projection image appears.
5. When set it up first time, the projection image may be blurry or distorted. Refer to the next part for instruction.

Turing off the projector: 

1. While the projector is in working status, press the power button on the projector/remote to turn it off(go to the standby mode).
2. When the projector is in standby mode, its auto protecting system will be activated. Press the power button to start up again.

Image Adjustment

Operating the projector for the first time, image may appear unclear or trapezoid, because the focus and keystone haven’t been adjusted. Please do the following steps for correction:
Focus Adjustment
Turn the trackwheel clockwise to bring the trackwheel to the end (Picture 1 ), then slowly rotate the trackwheel counterclockwise. At the same time, carefully observe the picture on the screen,when the image is clear, you get the best focus point.
Please note: When moving the projector from a cold to a warm environment, water vapour may occur. Do not tum the projector on until such time as the vapour has disappeared.
Keystone Adjustment
If a projected picture has keystone distortion, correct the image with keystone adjustment. The image will become a trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen. However, the circumference of the image may not be focused.

If you are unable to use the keystone correction function to correct the trapezoid disortion, please lower the projector to the center of the screen vertically. Or please use the Trapezoid or Four Point Trapezoid functions to further correct the trapezoid of the image. Please refer to Page 12.

System Introduction

Choosing the Signal Source

1. Turn on the projector, the main interface will appear.
2. Go to the “InputSource” in the main interface or source button on the remote control/projector.
3. Go to the corresponding Signal Source option, such as HDMI, VGA, & AV.

Reading Files from USB Disk

1. Insert USB devices to the USB port
2. Go to “LocalMedia” in the main interface.
3. Go to the corresponding file type.
4. Choose the multimedia file to play.

Note

1. You need to choose the correct file type to play the corresponding files.For example, when play image, you must select “Image” file type so that you can find and open an image from USB device.
2. If the file can not be read here, please go to Apps->ES File Explorer to open it.

Multimedia Format Supported 

• Video Format: 3GP/AVUFLV/MKV/MP4/MPG/WMV/RMVB/RM/TRPNOB/ DIVX/TP/TS/DAT
• Audio Format: MP3/AAC/FLAC/OGG/MAV/WMA/M4A
• Image Format: BMP/JPG/PNG/JPEG
• Text Format: TXT/DOC/XLS/PPT/PDF

Connecting to WiFi

1. Go to “Settings” on the top tab of the main interface.
2. Go to “WIFI”, and tum on the WiFi option.
3. Choose your wireless network from the list.
4. Type in the password, press the “return” button 8 on the remote to quit the soft keyboard and click”Connect” to connect wifi.

Connecting to Bluetooth Audio Device

1. Go to “Settings”–> “Bluetooth”, press “OK” button to tum on the Bluetooth.
2. Find out and click the Bluetooth audio device you want to connect in the list.
3. Press “OK” to perform Bluetooth pairing. After connecting, it will show “Connected”, the audio device works with the projector.
   Note: Bluetooth only support audio device and mouse/keyboard, other devices (e.g. phone) may connect, but cannot transmit any signal. Therefore except the Bluetooth audio devices,other devices name will be in the coding, will not show the real name.

APP Instruction
Some Apps are pre-installed, such as “Share” for screen mirroring, “OfficeSuite” for file reading, and “Brower” for ner surfing.
Tip: It is necessary to connect a mouse to help navigate in the apps, as the remote control is not as flexible as the mouse in the apps.
Downloading & Installing APPs
Method 1: Via Play Store

1. Go to “APPs” –> “Play store”;
2. Search apps, download and install them on the projector.

Method 2: Via USB memory stick

1. Search and download apk file for the app from its official website or this website: www.apkmirror.com (Make sure the apk file is for the Android TV system)
2. Copy the apk file to a USB memory stick–>insert the USB stick to the projector–>Go to “LocalMedia”–>”File”–)find out the apk file and click the apk file to install.

Adding app shortcut on the main interface

1. Go to “Home”–>”Add App”
2. Select the installed app and press “OK”, the app shortcut will be added to the “Home” page.
   Note: Once added, the app shortcut cannot be removed. You can only reset the projector to factory default to remove the app shortcut.

Image Setting

Projection Mode:

1. Go to “Settings”–>”Projection”
2. Select the mode you want to set and press the “OK” button to confirm.
   You can select the “Frontal” “Rear” “Ceiling” and “Ceiling Rear” projection modes.
3. Or you can press G on the remote to directly to flip the image.

Image Size Adjustment:

1. Go to “Settings”->”Zoom”
2. Go to “Whole Scaling”, and use the left key or right key on the remote to adjust the image size to fit to your screen. (Picture 2)
   Note: The image can only be zoomed out, can not be zoomed in. If you want to enlarge the image, you need to move the projector backward

Image Trapezoid Adjustment:

1. Go to “Four Point Trapezoid”, and adjust each comer of the image to get a rectangular image. (Picture 3)
2. Or go to “Trapezoid”, use the up and down button on the remote to adjust the vertical keystone. Use the left and right button to adjust the horizontal keystone. (Picture 4)

Wireless Display via EShare for iOS

1. Install EShare for iPhone
   Open the App Store on an iphone or ipad, download and Install “EShare for iPhone / iPad”
2. Connect to Projector
   After the installation is completed, launch EShare on your mobile device, and it will start to search for the projector devices in the same network.
   Then click on the device name which you want to connect in the device list.
3. Wireless File Streaming
   Click on any file (including music, video, picture, office document, PDF, e-book, and so on) on your iphone or ipad then it will be played or showed on your projector.
4. Wireless Mirroring
   Click on the “Mirroring” button in EShare, the screen will be mirrored to your projector.
5. TV Mirroring
   With “TV Mirror” function, you can mirror the screen of the projector to iOS device and touch directly to control it.
6. Remote Control
   You can use your phone as a touch mouse, air mouse keyboard, touch pad and remote controller of the projector.

Wireless Display via EShare for Android

1. Install EShare for Android
   Please ensure your android device is connected to the same network with projector, launch “EShare Server” on the projector, scan the QR code or visit the client download website. download and install “EShare for Android”.
2. Connect to Projector
   After the installation is completed, launch EShare on your android device, and it will start to search for the projector in the same network. Then click on the device name which you want to connect in the device list.
3. Wireless File Streaming
   Click on any file (including music, video, picture, office document, PDF, e-book, and so on) on your android phone or pad, then it will be played or showed on your projector.
4. Wireless Mirroring
   Click on the ‘Mirroring” button in EShare, the screen will be mirrored to your projector.
   Eshare integrated annotation pen in the wireless mirroring function. After the mirroring mode is started, the pen will appear on the top right of the screen.
5. TV Mirroring
   With “TV Mirror” function, you can mirror the screen of the projector to android device and touch directly to control it
6. Remote Control
   You can use your phone as a touch mouse, air mouse, keyboard, touch pad and remote controller of the projector.
7. Wireless Camera
   Use the camera of your mobile phone as wireless camera of projector.
8. Sharing files from other app to large display
   In other app, files can be shared to the large display through EShare through sharing.

Wireless Display via EShare for MAC

1. Connect Network
   Please ensure that Mac computer devices and projector are connected to the same Wifi. Open the “EShare” in the projector.Then the AirPlay icon appears on the taskbar at the top of the Mac computer.
2. Connect to the projector.
   • Click on the “Airplay” icon at the top of the Mac taskbar.
   • Choose the name of the projector, you can synchronize the computer screen to the projector

Wireless Display via EShare for Windows

1. Install EShare for Windows
   Please ensure your windows laptop is connected to the same network with your large display, launch “EShare Server” on the large display, visit client download website from your laptop, download and install “EShare for Windows”.
2. Connect to Large Display
   Launch EShare on your windows laptop, it will start to search for large display devices. Then click on the device which you want to connect to, and click on the start button the screen will be mirrored to your large display.

TROUBLESHOOTING

Problem	Possible Causes
1. The indicator light does not work when the power switch is turned on.	@ Power cable is not connected properly or defective.
	@ The power switch is faulty.
	@ The fuse is faulty.
	@ The power board is faulty.
2. The projector does not come on when using the remote control.	@ The power switch is turned off.
	@ The remote control has no batteries or the batteries are low.
	@ The remote control is not being aimed at the IR receiver.
	@ The IR receiver is under strong lights.
3. No image.	@ The input source may not be correct.
	@ No input signal.
	@ The input cable is not connected.
	If in PC mode, the PC output frequency is not 50-60Hz. @ Make sure you use the PC output to connect with projector.
	@ If use laptop, check the default signal output is VGA or HDMI.
	@ If power indicator light is on and fan runs, it is the power board problem. Please contact seller.
4. Auto-off.	@ The projector ventilation is blocked.
	@ The voltage is not stable.
	@ The projector is overheated – check if the fan is broken.
	@ There is bug in Android system, please contact the seller for the file to reboot the system.

Specification

LCD PanelSize	4″ TFT
Input Signal	Video	VGA/HDMI / USB /AV
Lens	Type	Optical glass lens
Lamp	LED	15W
	Life	50,000hours
Image	Size	30-120inch
	Keystone Correction Wheel	Vertically ±15 degree
Power	Voltage	100-240V-50/60Hz
	Power consumption	30W
Working Condition	Temperature	5°C-35°C
	Humidity	10%-65%
Store Condition	Temperature	0°C-40°C
	Humidity	10%-85%
Remote Control	Frequency	38K.Hz
Dimensions	Size	21×14.5x8cm / 8.26×5.7×3.15 inch
	Weight	1.1kg / 2.45 lbs
Android System	CPU	Quad core Cortex-A7, 1.2GHz
	GPU	Mali-400 MP2
	RAM/ROM	1GB DDR3/8GB EMMC
	Android Version	Android 7.1
	WIFI	2.4G, 802.11b/g/n
	Bluetooth	BTv4.0

Please note: The specifications above may change without prior notice.

Warranty card

Buyer information
Name/Company: __________ _
Telephone: ____________ _
Address:————–
Fax No.:————–
Product Purchased:———–
ModelNo.:————-
Series No.:————-
Se 11 er Store Name:———–
Date of Purchase:——————-

Manufacturer Information:
Manufacturer: Guangzhou Caiwei Electronic Technology & Development Co.Ltd
Address: No.8 Xujing West Street, Tianhe,Guangzhou,China 510660 Official Website: http://www.cai-wei.com/
Service Email: caiwei@eui:.net.cn
Thank you for purchasing the projector.
From date of purchased, we offer one year warranty on projector and 6 months warranty on the bulb.
When you need to fix the projector, please return the defective product, completed warranty card and send back the projector to the address your seller provide.

FAQS

No Sound?

1. DVD player: Go to its audio setting, change audio setting from auto to PCM.
2. Fire Stick or Apple TV: Go to device’s Audio setting, switch off Dolby audio option. On New version Firestick, go to Audio setting, select Dolby Digital Plus off mode(Stereo mode) or turn off auto-audio.
3. Roku Stick: Go to its audio setting and change the audio setting to PCM-stereo.
4. Video from USB device: check if the video with package DTS audio tracks, it is Not supported.

How To Turn Off Internal Speaker?

Press “Mute” button on remote.

Connect Computer Via HDMI, But No Response?

1. Windows PC: Go to “Setting”– “Display” on your computer, select “copy these Displays”.
2. Macbook: Go to “System preference” — “Setting” — “Arrangement”, click the “Mirror Displays”.

No Response When Connect Laptop using VGA Cable?

When connect laptop using VGA cable, we may need to use Fn combination keys. Switch the projector to VGA mode, and then simultaneously press Fn key and screen projection key. The screen projection key may at different place in different brand laptops. It is possibly among Fl – F12. Please refer to your laptop’s user manual. The following is for reference only:

• DELL: FN+F8 HP: FN+F4
• ThinkPad: FN+F7 TOSHIBA: FN+F5
• Acer: FN+F5 Samsung: FN+F4
• Sony: FN+F7

Image Flickers?

1. Change connection cable.
2. Change videos format. This LCD projector does not support active 3D videos and 4K video.
3. Change your device’s resolution.

Bluetooth Dela?

If play videos from online apps or from external devices, check the setting whether the player lets you de-sync the audio/video at the source to offset the delay. Media players on computer will do this (VLC,ect).

Cannot play videos while doing screen mirroring?

This problem is due to DRM service, a copyright protection service, which will prevent video from playing while doing screen mirroring. Please play video from other apps that does not have DRM service or play downloaded local videos.

Virtual Keyboard disappear or not pop up when log in Play store?

Please connect a keyboard to the projector to do the operation more easily.

Black Spot On Screen?

1. If it is small. it is a dust on the LCD screen inside, pat projector’s upper cover several times, dust will fall down.
2. If it is large, the LCD screen may have damaged, please contact your seller, mainly by e-mail.

Auto turn off or only show the “android” logo then turn off?

If meet such a problem, please contact your seller via email to ask for a firmware to reboot the android system, then the problem can be solved.

How to Contact Us to Get Support?

Email us atcaiwei@eug.net.cn  , and provide us with your order number, purchase platform(Amazon,Ebay or AliExpress ect.) and describe your problem in the email. We will reply and off er help to you within 24 hours.

References

• User Manual