CACGO K67 GPS Smart Watch
Product Specifications:
- Model: 699SGXZ=GZIN
- Power Source: 33*ORU)
- Operating Temperature: 0-40 degrees Celsius
- Compliance: FCC Part 15
Product Usage Instructions
Powering On the Device
To power on the device, press the designated power button located on the front panel.
Setting Up the Device
Follow these steps to set up the device:
- Connect the power source (33*ORU)) to the device.
- Place the device in an area with a minimum distance of 0cm between the radiator and your body.
- Ensure the device is on a stable surface to prevent any damage.
Operating the Device
Once the device is powered on and set up, you can start using it for your intended purpose. Refer to the user manual for specific instructions on different functions.
Frequently Asked Questions
Q: What should I do if the device does not power on?
A: Check if the power source (33*ORU)) is properly connected and try pressing the power button again. If the issue persists,contact customer support for assistance.
Q: How can I ensure compliance with FCC rules regarding radiation exposure?
A: Maintain a minimum distance of 0cm between the radiator of the device and your body during installation and operation.
Please make a full charge before using it.
Please make a full charge before using it.
APP:GloryFitPro
Download & Pairing
- Long press POWER key over 5 seconds for turning on
- Scan the QR code and install the GloryFitPro App or download the GloryFitPro App from App Store, Google Player and install it
Compatible system version: Android 5.0 and above, iOS 10.0 and above - Open the GloryFitPro App, allow all the permission and add device
Step 1: Turn on the Bluetooth of your mobile phone
Step 2: Open GloryFitPro App
Step 3: Click “Add A device” and pair it
Step4: Check watch menu”about” MAC address last four number like “994”, then go mobile phone “setting-bluetooth” to search the same bluetooth name with last 3 numbers “994” to finish BT connection as below operation.
Functions on Smart Watch
Time interface
- Power on: Long press POWER key for 5 seconds
- Power off: Long press POWER key for 5 seconds
- Change watch face: Long press the screen over 3 seconds,there are 12 built-in watch faces for choosing
- Menu interface, Left swipe interface (6 menu styles)
Function menu
- Steps counter
- Heart rate detection
- Sleep tracker
- Weather
- Music Control
- Smartwatch supports: GPS BEIDOU GALILEO GLONASS
- Message Notification
The smart notification function of the smartwatch relies on the notification bar of the mobile phone to work, please make sure you have allowed all permissions and the GloryFitPro App is running in the background
Functions on GloryFitPro App
- Data sync
All the measured data from smartwatch will be sync on GloryFitPro App automatically (including steps, sleep, heart rate,blood oxygen, training) - Watch faces
Over 100 watch faces for choosing, you could download and custom watch face on GloryFitPro App - Notifications
Turn on the switch to sync related information to smartwatch (Phone, Messages, Facebook, Twitter, WhatsApp, WaChat,Instagram, Skype, KakaoTalk, Line, Others)
Documents / Resources
 |
CACGO K67 GPS Smart Watch [pdf] User Manual 2BGT5-K67, 2BGT5K67, k67, K67 GPS Smart Watch, K67, GPS Smart Watch, Smart Watch, Watch |
