Cable Matters 201160 4 Port USB-A and USB-C Switch with Remote Control
Product Specifications
- Product Name: Cable Matters 4-Port USB-A & USB-C Switch with Remote Control
- Model Number: 201160
- Data Transfer Speed: 10Gbps
- Ports: 2 USB-A ports, 2 USB-C ports
- Control: Remote control and physical buttons on the unit
The Cable Maers 4-Port USB-A & USB-C Switch with Remote Control allows users to share two USB-A and two USB-C peripheral devices between two computers. The device enables fast data transfer at 10Gbps and provides seamless switching via remote control or physical buttons on the unit.
Important Notes Before Using
- No Video Support: This device is designed for data transfer only and does not support video output.
- No Host Charging: The switch does not charge the connected computers.
- Ensure the Power Button is ON: The switch must be powered on to function correctly. The power switch is on the side of the unit.
Setup Guidance
- Unbox and Inspect: Ensure all package contents are included:
- 1x USB-A & USB-C Switch
- 2x USB-C to USB-C 10Gbps data-only cables
- 1x Remote Control with Battery
- 2x Hook-and-Loop Strips
- 1x User Manual
- Connection Instructions:
- Step 1: Power off all source equipment before connecting.
- Step 2: Make sure the switch is turned OFF before connecting any devices.
- Step 3: Use the provided USB-C to USB-C cables to connect up to two computers to the switch.
- Step 4: Connect up to four USB peripherals (USB-A or USB-C) to the corresponding ports.
- Step 5: Turn the switch ON and confirm that the LED indicator lights up.
- Remote Control Setup
- Remove the battery insulation tab before first use.
- Ensure the remote is paired (by default, it comes pre-paired).
- If the remote does not work, try replacing the battery or repairing the remote.
Troubleshooting Guide
- Device Not Working / No Response
- Ensure the power switch is turned ON.
- Check that all cables are securely connected to the proper ports. The Host computers must be connected to the USB-C ports labeled 1 and 2.
- Try a different USB port on your computer.
- If using high-power peripherals (e.g., external HDDs), connect an external USB-C power adapter (5V 3A, not included).
- Peripheral Devices Not Recognized
- Verify that the connected USB devices function properly when directly connected to the computer.
- Restart the switch by unplugging and reconnecting the cables.
- If using a USB 2.0 keyboard/mouse, connect them to USB port #2, and USB 3.0 devices to port #4 to reduce interference.
- Lag or Connectivity Issues
- Try using shorter, high-quality USB cables.
- Reduce the number of connected high-power devices.
- Ensure both host computers are connected before switching between them.
- Remote Control Not Working
Check if the remote control function is enabled (press and hold buttons #1 and #2 on the switch for 5 seconds; slow-blinking LEDs indicate enabled, fast-blinking indicates disabled). Replace the battery if necessary.
Article ID: 183 Last updated: 19 Feb, 2025 Revision: 3 USB-C -> Cable Matters 4-Port USB-A & USB-C Switch with Remote Control (201160) – Installation and Troubleshooting https://kb.cablematters.com/index.php?View=entry&EntryID=183
Frequently Asked Questions
Q: Can this switch be used with devices other than computers?
A: The switch is designed to work with computers and may not be compatible with all other devices. Ensure compatibility before use.
Q: Is it possible to manually switch between connected devices without the remote control?
A: Yes, you can manually switch between devices using the physical buttons on the unit if the remote control is not available or malfunctions.
Documents / Resources
 |
Cable Matters 201160 4 Port USB-A and USB-C Switch with Remote Control [pdf] User Guide 201160 4 Port USB-A and USB-C Switch with Remote Control, 201160, 4 Port USB-A and USB-C Switch with Remote Control, USB-C Switch with Remote Control, with Remote Control, Remote Control |