MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller

Especificacions

• Nom del producte: 5 in 1 SPI+DMX LED Controller (BLE+2.4G)
• Núm. de model: SPIB5
• Tarifa IP: IP20
• Entrada Voltage: DC 5V-24V
• Temperatura de treball: -10~40°C
• Corrent de sortida: Màxim 10 A
• Dimensió: 74.5 * 36 * 17 mm
• Senyal de sortida:
  • SPI(TTL) 800Kbps (Max 1024 Pixel)
  • DMX: 250Kbps (Max 256 Pixel)
• Corrent d'espera: 20 mA
• Protocol: BLE+RF 2.4GHz
• Certificació: CE, EMC, LVD, VERMELL

Instruccions d'ús del producte

SPI Mode Installation

• For SPI LED Strips, follow the SPI Installation Diagram provided. Ensure proper connections and power input within the specified range.

DMX Mode Installation

• For DMX LED Strips, follow the DMX Installation Diagram provided. Make sure to connect as per the instructions and input the correct power supply voltage.

Smart Phone APP Control

1. Download and install the TUYA SMART APP from the application store.
2. Xarxa d'emparellament:
   • Connect the controller to the mains and ensure the indicator is flashing quickly.
   • You can correct the indicator status by long-pressing the SET button or powering off and on the controller 6 times.
   • Connect your phone to a 2.4GHz home wifi network.
   • Open the TUYA SMART APP, click on “Lighting and Light source (BLE+Wifi)” and follow the on-screen instructions to complete the pairing process.

Característica del producte

• Support BLE+2.4GHZ wireless transmitting technology
• 5 in 1 SPI controller, single color, cct, rgb, rgbw, rgb+cct output selection
• Speed, static mode, dynamic mode, and music mode are adjustable
• Dual SPI/DMX control protocol, compatible with DC5-24V input
• Dynamic mode: 28 kinds of white color and 80 kinds of RGB color for selection, it can change color, brightness, width, and speed for those modes
• 8 kinds of music modes work with the internal microphone and the smartphone microphone
• Freely switching between dynamic mode and music mode
• Setting up boot animation via TUYA APP
• Have DND mode, usually used in a power failure area, to save power

Paràmetre del producte

Dimensió

Diagrama de connexió

Diagrama d'aplicacions

Comandament compatible

( purchase separately)

Enllaçar/Desenllaçar

1. Enllaç
   1. Power off for 10 seconds and power on again, or short-press “SET”
   2. Press the ” ON” button 3 times within 3 seconds.
   3. Green flashing state, then the code is successful.
      • L'enllaç falla si la llum no parpelleja. Repetiu els passos anteriors.
      • Atenció: can not link again if the remote has already finished linking.

Desenllaça

1. Power off for 10 seconds and power on again, or short-press “SET”
2. Press the “ON” button 5 times within 3 seconds.
3. Red flashing state, then clear the code successfully.
   • Unlink is failed if the light doesn’t flash, please repeat the above steps
   • (Atenció: no need to unlink if the light is never be linked)

Smart Phone APP Control

Pairing Network (doesn’t support 5G router)

1. Download and install the “TUYA SMART” APP
   • Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account
2. Xarxa de vinculació
   • Connect the controller to the mains
   • Ensure indicator flashes quickly 2 times per seconds)
   • You have 2 ways to correct the indicator status
   • Long-press press” SET” button
   • Power off and power on the controller 6 times
   • Connect the phone with the home Wi-Fi 2.4 GHz network
   • Open the APP interface, click “+”
   • Click “Lighting” and “Light source (BLE+Wifi)
   • Complete the rest steps

Instrucció de funció

Mode estàtic

Adjust or save pure static illumination

• Per example, regarding as App

Dynamic Mode ( select it via remote)

• 28 kinds of white color, 80 kinds of RGB color, save favorite modes, and 8 scenes mode, all modes can change color, brightness, width, and speed

Mode de música

• 8 kinds of music modes work with the internal microphone andthe  smart smartphone microphone

Setting Communication Protocol

• Setting it via APP
• Select SPI or DMX protocol

Setting the LED strip light

• Change output based on different LED strip lights like single color, CCT, RGB, RGBW, rgb+cct
• LED strip light types

Setting Pixel points

• Setting it via a program
• Slip the slider to change numbers

Calibració del color

• Correct the color of led strip light via APP
• Following the tip to complete color calibration

Animació d'arrencada

• Setting color or color temperature, speed and brightness

Funció de temporitzador

Setting it via APP

Mode DND ON/OFF

• Turn on DND mode ( usually used in power failure areas to save power)

Instruccions de control de veu d'Alexa

• Please add the device to the [Tuya Smart] app, then start following the steps.
  1. Obriu l'aplicació Alexa
  2. Feu clic a "Més" a la part inferior de la cantonada dreta
  3. Feu clic a "Habilitats i jocs"
  4. Feu clic a "”A l’extrem superior dret
  5. Type “Smart Life” and search
  6.  Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

Instruccions de control per veu de Google Home

Afegiu el dispositiu a l'aplicació [Tuya Smart] i, a continuació, comenceu a seguir els passos

1. Obriu l'aplicació Google Home
2. Click “+” on the top left corner
3. Feu clic a "Configura el dispositiu"
4. Feu clic a "Funciona amb Google"
5. Feu clica la cantonada superior dreta
6. Type “Smart Life” and search
7. Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

Atenció

1. Si us plau, apagueu la font d'alimentació abans de la instal·lació.
2. Assegureu-vos que l'entrada voltage sigui el mateix que els requisits del dispositiu.
3. Don’t disassemble the device if you are not an expert; otherwise, you will damage it.
4. Please do not use the light in places with a wide range of metal areas or strong electromagnetic waves nearby, otherwise, the remote distance will be seriously affected.

Preguntes freqüents

Can I control both SPI and DMX LED strips with this controller?

Yes, this controller supports both SPI and DMX LED strips. Follow the installation diagrams provided for each mode accordingly.

What is the maximum control distance for this LED controller?

The control distance for this LED controller is up to 30 meters.

Documents/Recursos

MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller [pdfManual del propietari SPIB5, C9, SPIB5 5 in 1 SPI Plus DMX LED Controller, SPIB5, 5 in 1 SPI Plus DMX LED Controller, SPI Plus DMX LED Controller, DMX LED Controller, LED Controller, Controller

Referències

• Manual d'usuari