Audionic HD298 Multi Function Bluetooth Speaker User Manual

Audionic HD298 Multi Function Bluetooth Speaker User Manual

HD298 Multi Function Bluetooth Speaker

Manual d'usuari

Stylishi multi-function Bluetooth speaker

High-end audio-visual production expert Let you experience a different kind of brilliance
Moltes gràcies per la compraasing the products of our company To enable you to fully utilize all the functions
provided by our company’s speakers, Please read this manual carefully and complete the Settings correctly. Please
keep this manual properly for reference in case of any problems in the future.

Notes:

  1. If the interior of the machine is exposed to rain or moisture, Please place the machine in a well ventilated area to dry.
  2. Do not bake this machine at high temperature. Otherwise, it is easy to burn out or cause the internal components of the machine to fail.
  3. This product must not be exposed to environments such as sunlight, here or similar overheating
  4. Do not throw it to avoid dropping and damage.
  5. If the battery is not replaced properly, there is a risk of explosion. Only batteries of the same type can be used
    for replacement.6 .Batteries (battery packs or combined batteries) must not be exposed to environments such as
    sunlight, fre, or near-overheating.

Stylishi multi-function Bluetooth speaker

Instruccions de funcionament

  1. Main control volume: Control the volume level. – Volume decreases, + volume increases.
  2. Microphone volume: During the use of the microphone, the volume can be adjusted as needed.
  3. Reverb volume: Reverb volume adjustment.
  4. High-frequency volume: Adjust the high-frequency volume (optional, within the prescribed limits.
  5. Bass volume: Adjust the bass volume (optional, subject to the actual model)
  6. Receiver:6.5mm microphone interface.
  7. AUX- External audio input: It refers to the connection of music to the source of other audio devices using the
    corresponding 3.5mminterface and audio connection cable.
  8. TF-Card input: Music on the TF card can be played through this interface.
  9. USB input: Music from a USB flash drive can be played through this interface
  10. Previous Song: Switch the song to the previous one (long press to rewind).
  11. Play/Pause: When music is playing, a short press can pause the current song. Press it again to resume playing.
    (in radio mode, a long press will automatically search for channels.}
  12. Next song: The song switches to the next one (long press for fast-forward function)
  13. Mode Switching: Short press to switch between Blue tooth /TF card /USB mode, and long press to meter the lop playback mode.
  14. Recording: Briefly press to record, then press to play the recording, and press the mode key again to resume music playback.
  15. Eliminate the original voice: One click to eliminate the original singing voice. Pressed hold the micrephone first.
  16. 0-9 Digital song selection keys + special effect sound card sound effect (Long press of the digital keys is
    effective)(Optional, subject to the actual model)
  17. Power input: When the battery of the audio equipment is low, please use the power charging cable provided
    randomly and plug it in for charging.
  18. Display screen: Shows the start to status.
  19. Charging indicator light: Red light on when charging and off when fully charged.
  20. The product is not equipped with a power adapter when leaving the factory. When users actually use it, they
    should choose a power adapter that has passed the CCC certification for audio and video. The output voltage de
    the adapter should be 5VC, and the out out current should not be less than 1A

Declaració de la FCC

Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte als dos següents
condicions: (1) Aquest dispositiu no pot causar interferències nocives i (2) aquest dispositiu n'ha d'acceptar cap
interferències rebudes, incloses les interferències que poden provocar un funcionament no desitjat.

Aquest equip s'ha provat i s'ha comprovat que compleix els límits d'un dispositiu digital de classe B,
d'acord amb la part 15 de les Normes de la FCC. Aquests límits estan dissenyats per proporcionar una protecció raonable
contra interferències nocives en una instal·lació residencial. Aquest equip genera, utilitza i pot
irradiar energia de radiofreqüència i, si no s'instal·la i s'utilitza d'acord amb les instruccions, pot
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
recepció de televisió, que es pot determinar apagant i encès l'equip, és l'usuari
animat a intentar corregir la interferència mitjançant una o més de les mesures següents:

  • Reorienta o reubica l'antena receptora.
  • Augmentar la separació entre l'equip i el receptor.
  • Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
  • Consulteu el distribuïdor o un tècnic de ràdio/TV amb experiència per obtenir ajuda.

Precaució: Qualsevol canvi o modificació a aquest dispositiu no aprovat explícitament pel fabricant podria
anul·leu la vostra autoritat per fer servir aquest equip.

Informació d'exposició a RF
S'ha avaluat que el dispositiu compleix els requisits generals d'exposició a RF. El dispositiu es pot utilitzar en
condició d'exposició portàtil sense restriccions.

Documents/Recursos

PDF thumbnailHD298 Multi Function Bluetooth Speaker
User Manual · 2BSMO-HD-298, 2BSMOHD298, HD298, HD298 Multi Function Bluetooth Speaker, HD298, Multi Function Bluetooth Speaker, Multi Function Bluetooth Speaker, Bluetooth Speaker, Speaker

Referències

Fes una pregunta

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Fes una pregunta

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.