1. Introducció
The Montech AX120 PRO is a high-performance 120mm cooling fan designed for efficient thermal management in computer systems. This 3-pack includes fans with a glowing ARGB rim and illuminated fan blades, providing both cooling capability and visual effects. The fans feature a precision-engineered 9-blade design for optimal airflow and static pressure, along with integrated anti-vibration pads for reduced noise. A durable rifle bearing ensures smooth operation and an extended lifespan. This manual provides instructions for installation, operation, maintenance, and troubleshooting.
Imatge 1.1: acabatview of MONTECH AX120 PRO ARGB Fans and their features.
2. Què hi ha a la caixa
Verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació:
- 3 x MONTECH AX120 PRO ARGB PWM 120mm Fans
- 1 x ARGB Fan Hub
- Cargols de muntatge
Image 2.1: Packaging and contents of the AX120 PRO 3-pack.
3. Configuració i instal·lació
Follow these steps to properly install your MONTECH AX120 PRO fans:
- Prepareu el vostre sistema: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the fan mounting locations.
- Muntar els ventiladors: Position each AX120 PRO fan in your desired location (e.g., front intake, rear exhaust, top exhaust). Use the included mounting screws to secure the fans to the case. Ensure the fan's airflow direction is correct for your cooling strategy. The AX series fans typically blow air from the RGB end to the non-RGB end.
- Connect to Fan Hub: Connect the 4-pin PWM cable from each fan to an available 4-pin fan header on the included ARGB Fan Hub.
- Connect ARGB Cables: Connect the 3-pin ARGB cable from each fan to an available 3-pin ARGB header on the fan hub. Ensure correct orientation to avoid damage.
- Connect Fan Hub to Motherboard:
- Connect the 4-pin PWM cable from the fan hub to a 4-pin PWM fan header on your motherboard (e.g., CPU_FAN, SYS_FAN). This allows for fan speed control.
- Connect the 3-pin ARGB cable from the fan hub to a 3-pin 5V ARGB header on your motherboard. This enables software control of the fan lighting. No connecteu a un connector RGB de 12V de 4 pins, ja que això danyarà els LED.
- Connect Fan Hub Power: Connect the SATA power connector from your power supply unit (PSU) to the ARGB Fan Hub. This provides power to both the fans and the ARGB lighting.
- Gestió de cables: Route all cables neatly to ensure proper airflow within the case and a clean aesthetic.
Image 3.1: The included ARGB Fan Hub for connecting multiple fans.
Image 3.2: Illustration of fan placement and airflow for optimal cooling.
4. Instruccions de funcionament
4.1. PWM Fan Speed Control
The AX120 PRO fans utilize Pulse Width Modulation (PWM) technology, allowing your motherboard to dynamically adjust fan speeds based on system temperature. This provides an optimal balance between cooling performance and noise levels. Fan speeds can range from 600 to 1600 RPM.
- Control automàtic: Once connected to a 4-pin PWM header on your motherboard, the fan speed will be automatically regulated by your motherboard's BIOS/UEFI settings or operating system software.
- Ajust manual: Normalment podeu ajustar les corbes del ventilador i definir un pro de velocitat personalitzat.files through your motherboard's BIOS/UEFI or dedicated fan control software provided by your motherboard manufacturer.
Image 4.1: PWM control mechanism for intelligent cooling.
4.2. Control d'il·luminació ARGB
The AX120 PRO fans feature Addressable RGB (ARGB) lighting, allowing for customizable lighting effects. The lighting is controlled via your motherboard's ARGB software.
- Software Synchronization: Connect the fan hub's ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB control software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync) to customize lighting patterns, colors, and effects.
- Control independent: If your motherboard does not have an ARGB header, or if you prefer, a separate ARGB controller (not included) can be used to manage the lighting.
Image 4.2: ARGB lighting synchronization with major motherboard brands.
5. Manteniment
Regular maintenance helps ensure optimal performance and longevity of your fans.
- Neteja: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft brush. Ensure the fan is powered off and unplugged before cleaning. Do not use liquid cleaners directly on the fan.
- Inspecció: Check fan cables for any signs of wear or damage. Ensure all connections to the fan hub and motherboard are secure.
- Bearing Care: The rifle bearing is designed for long-term, maintenance-free operation. No lubrication is required.
Imatge 5.1: Interna view of the rifle bearing, designed for durability.
6. Solució De Problemes
If you encounter issues with your MONTECH AX120 PRO fans, refer to the following common problems and solutions:
- Els ventiladors no giren:
- Ensure the fan hub is correctly connected to the PSU via the SATA power cable.
- Verify that the 4-pin PWM cables from the fans are securely connected to the fan hub, and the fan hub's PWM cable is connected to a motherboard fan header.
- Comproveu la configuració de la BIOS/UEFI de la placa base per assegurar-vos que els capçals dels ventiladors estiguin activats i configurats correctament.
- Sense il·luminació ARGB:
- Confirm the 3-pin ARGB cables from the fans are connected to the fan hub, and the fan hub's ARGB cable is connected to a 3-pin 5V ARGB header on your motherboard.
- Important: Do not connect to a 4-pin 12V RGB header.
- Ensure the fan hub is receiving power from the PSU via SATA.
- Check your motherboard's ARGB software for lighting control and ensure it is running and configured.
- Soroll excessiu:
- Verify that the fans are securely mounted and not vibrating against the case. The fans include anti-vibration pads.
- Check for any cables or obstructions interfering with the fan blades.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern at idle.
- Netegeu qualsevol acumulació de pols a les aspes del ventilador.
7. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | AX120PW3in1 |
| Dimensions del ventilador | 120 mm x 120 mm x 25 mm (4.72" de llargada x 0.98" d'amplada x 4.72" d'alçada) |
| Velocitat del ventilador | 600 - 1600 RPM (controlades per PWM) |
| Capacitat de cabal d'aire | 72.3 CFM (Peus cúbics per minut) |
| Nivell de soroll | 25.4 dBA (màxim) |
| Pressió estàtica | 1.85 mm H2O |
| Tipus de rodament | Coixinet de rifle |
| Connector d'alimentació | PWM de 4 pins |
| Connector ARGB | ARGB de 3 pins i 5 V |
| Dispositius compatibles | Ordinadors d'escriptori |
| Nombre d'articles | 3 Fans + 1 Hub |
8. Garantia i Suport
8.1. Informació de la garantia
The MONTECH AX120 PRO ARGB PWM 120mm Fan 3-Pack comes with a 3 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació i garanteix que el producte compleix els estàndards de rendiment especificats en condicions d'ús normal. Conserveu el comprovant de compra per a reclamacions de garantia.
8.2. Suport tècnic
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact MONTECH customer support through their official website or the retailer where the product was purchased. Provide your product model number (AX120PW3in1) and a detailed description of the issue to expedite support.
