1. Producte acabatview
The Montech HS02 PRO is an ATX Mid-Tower PC case designed for high-airflow gaming systems. It features a reversible layout, a sturdy curved tempered glass front panel, and comes with five pre-installed ARGB PWM fans. The case incorporates a sink-in design for an unobstructed interior view and supports various motherboard form factors.
Figura 1: Frontal view of the Montech HS02 PRO PC case.
Figura 2: lateral view of the Montech HS02 PRO PC case, showcasinl'interior.
Figura 3: posterior view of the Montech HS02 PRO PC case.
2. Configuració i instal·lació
2.1 Desembalatge i inspecció inicial
Carefully remove the PC case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws, cables, and the user manual, are present.
2.2 Eliminació de panells
The side panels and top panel are designed for toolless removal, typically secured by magnets or simple latch mechanisms. Gently pull or unlatch to access the interior.
2.3 Instal·lació de la placa base
The HS02 PRO supports Mini-ITX, Micro-ATX, and Standard ATX motherboards. Install the necessary standoffs for your motherboard size. Position the motherboard and secure it with screws. This case also supports back-connect motherboards for cleaner cable management.
Figure 4: Front I/O panel with USB 3.0, Type-C, audio, mic, power, and LED buttons.
Figura 5: Interior view showing back-connect motherboard compatibility.
2.4 Instal·lació de la GPU
The spacious interior supports modern GPU sizes, including those up to 420mm. The rotatable PCIe slots allow for easy GPU positioning in either horizontal or vertical orientation without requiring external mounts.
Figure 6: GPU compatibility, supporting up to 420mm GPUs.
2.5 Instal·lació de la font d'alimentació
The power supply mounts at the bottom of the case. Secure it using the provided screws.
2.6 Fan and Radiator Configuration
The case comes with five pre-installed GF120 V2 ARGB PWM fans. It supports flexible cooling configurations:
- A dalt: Up to 3x 120mm fans or 120/240/360mm radiators.
- posterior: Fins a 2 ventiladors de 120 mm.
- A baix: Up to 3x 120mm fans or 120/240mm radiators.
Figure 7: Five pre-installed GF120 V2 ARGB fans.
Figure 8: Flexible cooling compatibility for fans and radiators.
3. Instruccions de funcionament
3.1 Encès
After all components are installed and cables connected, press the power button located on the front I/O panel to power on your system.
3.2 Control d'il·luminació ARGB
The pre-installed ARGB fans and integrated light strip can be customized with 29 lighting modes. Use the LED button on the front I/O panel to cycle through modes or connect to your motherboard's lighting control software for synchronization.
3.3 Reversible Layout
The case features a top-down reversible layout, allowing the entire setup to be positioned with the glass panel on either the left or right side. This requires disassembling and reassembling components in the inverted orientation. Refer to the detailed assembly guide for specific steps if you wish to reverse the layout.
Figure 9: Reversible layout feature.
4. Manteniment
4.1 Neteja del filtre de pols
Regularly clean the dust filters to maintain optimal airflow and cooling performance. Filters are typically located on the top, bottom, and front (if applicable) and can be removed for cleaning with compressed air or water.
4.2 Neteja general
Use a soft, dry cloth to clean the exterior surfaces of the case, including the tempered glass panel. Avoid abrasive cleaners or solvents that may damage the finish.
5. Solució De Problemes
5.1 El sistema no s'encén
- Check all power connections to the motherboard, CPU, and GPU.
- Assegureu-vos que la font d'alimentació estigui encesa.
- Verify front panel connectors (power switch) are correctly attached to the motherboard.
5.2 Els ventiladors no giren o l'RGB no funciona
- Confirm fan power cables are securely connected to the motherboard or fan hub.
- Check ARGB cables for proper connection to the motherboard or controller.
- Ensure motherboard RGB software is installed and configured correctly.
5.3 Problemes de sobreescalfament
- Clean all dust filters and internal components.
- Verify fan orientation for optimal airflow (bottom intake, top/rear exhaust for chimney effect).
- Ensure CPU cooler and GPU fans are functioning correctly.
Figure 10: Chimney-style cooling airflow diagram.
6. Especificacions
| Característica | Detall |
|---|---|
| Marca | Montech |
| Nom del model | HS02 PRO White (HS02PW) |
| Tipus de cas | Torre mitja |
| Compatibilitat amb la placa base | ATX, Micro ATX, Mini ITX |
| Color | Blanc |
| Material | Metall, Vidre temperat |
| Dimensions del producte (LxWxH) | 18.7" de profunditat x 9.1" d'amplada x 17.9" d'alçada (aprox. 47.5 x 23.1 x 45.5 cm) |
| Pes de l'article | 15.1 lliures (aprox. 6.85 kg) |
| Mètode de refrigeració | Aire |
| Tipus de muntatge de la font d'alimentació | Muntatge inferior |
| Ventiladors preinstal·lats | 5x ARGB PWM Fans |
| Ports USB 3.0 | 2 |
| Característiques del panell frontal | USB 3.0, Type-C, Audio, Mic, Power Button, LED Button |
7. Informació de la garantia
This Montech PC case is covered by the manufacturer's limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Montech weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
8. Suport
Per a més ajuda, suport tècnic o per a view additional product resources, please visit the official Montech weblloc:
Visit the Montech Store on Amazon
You may also find helpful information and FAQs on the Montech support pages.
