Producte acabatview
The FLIR VS80 Videoscope Screen is a versatile and rugged inspection tool designed to improve inspection speed and efficiency. This manual provides essential information for the proper setup, operation, and maintenance of your VS80 Videoscope Screen.
Característiques clau
- Improve Inspection Speed: Designed for quick and efficient visual inspections.
- Versatile, Rugged, Reliable: Built to withstand demanding environments and provide consistent performance.
- Identify, Document, Share: Capabilities for capturing and sharing inspection data.
- Performs wide range of inspections: Adaptable for various inspection scenarios.
- Garantia limitada de 3 anys: Provides assurance for product longevity.
Contingut del paquet
En obrir el paquet, assegureu-vos que hi hagi tots els elements següents:
- Visualitza els auriculars
- Targeta SD
- cable USB
- Cable HDMI
- Corretges
- Cas
- Sun Visor Adaptor
Configuració
Configuració inicial
- Carregueu el dispositiu: Connect the VS80 Videoscope Screen to a power source using the provided USB cable. Ensure the device is fully charged before first use.
- Inseriu la targeta SD: Locate the SD card slot, typically on the side or bottom of the device. Insert the provided SD card firmly until it clicks into place. This card is essential for saving images and videos.
- Enganxar corretges: Securely attach the included straps to the designated attachment points on the VS80 screen for comfortable and safe handling during inspections.
- Connect Probe (if applicable): If you have a compatible VS80 probe (sold separately), connect it to the designated port on the VS80 screen. Ensure a secure connection.
Image: The FLIR VS80 Videoscope Screen displaying a live feed from an inspection probe, highlighting its clear display and ergonomic design.
Instruccions de funcionament
Encès/Apagat
- Per encendre: Press and hold the power button (usually located on the side or top) until the FLIR logo appears on the screen.
- Per apagar: Press and hold the power button until a shutdown prompt appears, then confirm. Alternatively, a quick press may put it into standby mode.
Navegació i menú
The VS80 features intuitive controls for navigating menus and adjusting settings. Use the directional pad and selection buttons to move through options and confirm choices.
Image: The FLIR VS80 Videoscope Screen showing a thermal overlay, demonstrating its advanced imaging modes for detailed analysis.
Captura d'imatges i vídeos
- Viu View: Ensure the probe is connected and positioned to view the area of interest.
- Captura d'imatge: Press the dedicated camera button (often marked with a camera icon) to take a still photograph. The image will be saved to the SD card.
- Grava vídeo: Press the video record button (often marked with a red dot or video camera icon) to start recording. Press it again to stop recording. Videos are also saved to the SD card.
- Review Mitjans de comunicació: Access the gallery or playback mode from the main menu to review imatges i vídeos capturats.
Image: The FLIR VS80 Videoscope Screen displaying a high-resolution visual inspection, ideal for plumbing and ductwork.
Manteniment
Neteja del dispositiu
- Pantalla: Use a soft, lint-free cloth to gently wipe the screen. For stubborn smudges, a screen cleaner designed for electronics can be used sparingly. Avoid abrasive materials.
- Cos: Wipe the body of the VS80 with a damp tela. No utilitzeu productes químics o dissolvents aggressivs.
- Probe (if applicable): Refer to the specific probe's manual for cleaning instructions. Ensure the probe tip is free of debris for clear imaging.
Emmagatzematge
When not in use, store the FLIR VS80 Videoscope Screen in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the SD card if storing for extended periods.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Bateria baixa o sense càrrega. | Connect to power source and charge for at least 2 hours. |
| No image from probe. | Probe not connected securely or faulty probe. | Ensure probe is fully inserted. Test with another compatible probe if available. |
| No es poden desar imatges/vídeos. | SD card full, not inserted, or corrupted. | Comproveu la inserció de la targeta SD. Suprimiu l'antiga files or replace SD card. Format SD card (this will erase all data). |
| La pantalla està congelada. | Error de programari. | Feu un restabliment suau mantenint premut el botó d'engegada durant 10-15 segons fins que el dispositiu es reiniciï. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | VS80 |
| Dimensions del producte | 9.84 x 5.91 x 1.97 polzades; 33.07 lliures |
| Bateries | Necessites 1 piles AAA (incloses) |
| Fabricant | FLIR |
| País d'origen | Taiwan |
| ASIN | B0B25V5P9S |
| Primera data disponible | 24 de maig de 2022 |
Garantia i Suport
Informació de la garantia
The FLIR VS80 Videoscope Screen comes with a Garantia limitada d'3 any. Please retain your proof of purchase for warranty claims. For full details on warranty coverage, limitations, and procedures, refer to the official FLIR warranty documentation or visit the FLIR weblloc.
Atenció al client
For technical assistance, service, or additional information, please contact FLIR customer support. You can find contact details and support resources on the official FLIR weblloc:
When contacting support, please have your product model (VS80) and ASIN (B0B25V5P9S) ready.
