Producte acabatview
The DAYTECH Wireless Motion Sensor Chime (Model LC01-HW12) is a versatile device designed to provide alerts for various situations, functioning as a welcome chime, doorbell, or anti-theft alarm. It features a high-sensitivity infrared motion sensor with a detection range of up to 10 meters and a wide detection angle (15° vertical, 100° horizontal), ensuring reliable detection with minimal false alarms. The wireless receiver offers a long transmission range of up to 150 meters outdoors and 100 meters indoors, eliminating the need for complex wiring. It supports 5 levels of volume adjustment and 20 selectable melodies.
This system is ideal for various applications, including:
- Visitor Chime: Notifies you when guests arrive at your home or shop entrance.
- Elderly/Infirm Call Bell: Can be used as a call bell for the elderly or individuals with physical limitations.
- Room-to-Room Alert: Provides alerts between different rooms.
- Security Alarm: Acts as a deterrent against intruders in homes, offices, factories, or warehouses.
Image: DAYTECH Wireless Motion Sensor Chime operating in Welcome, Doorbell, and Alarm modes.
Image: Wireless stable transmission of the DAYTECH chime system.
Contingut del paquet
El paquet inclou els articles següents:
- 1 x Unitat receptora
- 1 x Motion Sensor Transmitter
- Mounting Accessories (Double-sided tape, screws)
- 3 x piles alcalines AAA
- Manual d'instruccions
Image: Components of the DAYTECH Wireless Motion Sensor Chime.
Guia de configuració
1. Alimentació dels dispositius
The receiver unit is AC powered. Plug it into a standard wall outlet. The motion sensor is battery-powered and requires 3 AAA batteries (included). Ensure batteries are inserted with correct polarity.
Image: Inserting AAA batteries into the motion sensor.
2. Mounting the Motion Sensor
The motion sensor can be mounted using the included double-sided tape or screws. Choose a location above a door or bed, ensuring the sensor has a clear line of sight for detection. The sensor offers 180° adjustable angle and 360° rotation for optimal positioning.
Video: Step-by-step guide on how to install the motion sensor, demonstrating its adjustable angle and 360-degree rotation for flexible placement.
Image: Mounting the motion sensor with adjustable angle and rotation.
3. Emparellar els dispositius
- Turn off the transmitter sensor.
- Select your desired melody on the receiver unit.
- Press and hold the volume button on the receiver for 5 seconds until the LED flashes and you hear a "ding-dong" sound, indicating pairing mode.
- Turn on the transmitter sensor. The sensor will perform a self-diagnosis (indicator light slowly flashes for about 18 seconds). Once the light turns off, the sensor is in normal operating mode.
- Test the pairing by waving your hand in front of the sensor. The receiver should chime.
Video: Demonstration of the pairing process between the motion sensor and the receiver.
Instruccions de funcionament
Mode Selection (Doorbell/Alarm)
Long-press the "Up" button on the receiver to switch between Doorbell Mode and Alarm Mode. The motion sensor will respond immediately upon detection in either mode.
- Mode de timbre: When a visitor is detected, the receiver plays a pre-set melody. At night, a silent mode can be activated where only the light indicator is used.
- Mode d'alarma: If an intruder is detected at night, the infrared motion sensor immediately triggers a loud, continuous alarm (up to 110dB) until any button is pressed, deterring intruders and alerting occupants.
Image: DAYTECH Wireless Motion Sensor Chime 3-in-1 modes.
Volume and Melody Adjustment
The receiver offers 5 levels of volume adjustment and 20 different melodies to choose from. Use the volume buttons on the side of the receiver to adjust the sound level and the melody selection button to cycle through the tunes.
Video: How to change the melody on the receiver unit.
Image: Receiver features including melody and volume adjustment.
Manteniment
Battery Replacement (Motion Sensor)
When the green indicator light on the sensor changes to red and flashes, it indicates low battery. Replace the 3 AAA batteries promptly. The sensor is designed for easy removal from its bracket for convenient battery changes.
Video: How to replace the batteries in the motion sensor.
Image: Motion sensor low power notification.
Resolució de problemes
- No chime when motion is detected: Ensure the receiver is plugged in and powered on. Check the motion sensor batteries and replace if low. Verify that the devices are properly paired.
- Short detection range: Ensure there are no obstructions between the sensor and the area to be monitored. Adjust the sensor's angle and position for optimal coverage.
- Falses alarmes: Adjust the sensor's sensitivity if available. Ensure the sensor is not exposed to direct sunlight or rapid temperature changes.
- Interferència: If experiencing inconsistent performance, try relocating the receiver or sensor to minimize interference from other wireless devices.
If issues persist, please refer to the warranty and support information below.
Especificacions
| Característica | Detall |
|---|---|
| Marca | DAYTECH |
| Número de model | LC01-HW12 |
| Dimensions del producte | 6.5 x 4 x 8.5 cm |
| Pes de l'article | 220 g |
| Font d'alimentació (sensor) | 3 AAA Alkaline Batteries (Included) |
| Interval de detecció | Fins a 10 m |
| Angle de detecció | Vertical 15°, horitzontal 100° |
| abast sense fils | Outdoor 150m / Indoor 100m |
| Nivells de volum | 5 nivells |
| Melodies | 20 tipus |
Garantia i Suport
The sensor chime comes with a 1-year quality guarantee from the date of purchase. For any defects, damage, initial malfunctions, or questions during normal use, please contact us through your Amazon order history. We are committed to providing sincere and prompt support.
To contact support: Go to "Amazon Order History" → "Contact Seller".
