MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1 Producte acabatview

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 Contingut del paquet

• MiBOXER PUSH2-3 Wireless Dimming Remote
• Manual d'usuari
• Wiring terminals (pre-attached)

Figura 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

Figura 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. Informació de seguretat

Si us plau, observeu les següents precaucions de seguretat per evitar lesions o danys al producte:

• No exposeu el dispositiu a la humitat ni a temperatures extremes.
• Ensure all power is disconnected before installation or wiring.
• Aquest dispositiu només està dissenyat per a ús interior.
• No intenteu desmuntar o modificar el dispositiu.
• Mantenir fora de l'abast dels nens.

3. Característiques del producte

• 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
• Tecnologia sense fil de 2.4 GHz: Provides reliable and interference-free communication with compatible LED systems.
• Àmplia compatibilitat: Works with RGB, CCT, and single-color LED systems.
• Disseny ergonòmic: Features an easy-to-use layout for quick brightness adjustments.
• Requisits de bateria: Requereix una bateria CR2032 (no inclosa).
• Manteniment mínim: Designed for simple operation and long-lasting performance.

4. Especificacions

Figura 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

Figura 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. Configuració

5.1 Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Obriu la coberta del compartiment.
3. Inseriu una pila CR2032, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

5.2 Cablejat i connexió

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

Figura 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps and controls.
5. Once all connections are secure, restore power to the lighting system.

Figura 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. Instruccions de funcionament

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 Emparellar el comandament a distància

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

1. Powering on the light fixture.
2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

• Selecció de zones: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
• Dimecres: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
• On/Off: A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. Manteniment

• Neteja: Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Substitució de la bateria: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
• Emmagatzematge: If storing the remote for an extended period, remove the battery to prevent leakage.

8. Solució De Problemes

9. Garantia i Suport

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.

Manufacturer: Miboxer

Data de primera disponibilitat: 5 de novembre de 2024