Introducció
This manual provides instructions for the Grundig Wireless LED Light Bar with Motion Detector. This smart LED lamp is designed for use in cabinets, closets, kitchen furniture, or any dark area requiring additional illumination. It features a sleek design and offers three operating modes: continuously on, off, and automatic motion detection.
Configuració i instal·lació
Follow these steps to install your LED light bar:
- Mount the Metal Brackets: Select the desired location for the light bar. Mount the two metal brackets, ensuring a minimum spacing of 20 cm (approximately 7.9 inches) between them.
- Place the LED Lamp: Carefully place the LED light bar into the mounted metal brackets.
- Adjunt segur: The integrated magnets within the light bar will securely hold it in place on the metal brackets.
Image: Grundig Wireless LED Light Bar with Motion Detector. The image shows the sleek, white LED light bar, highlighting its compact design suitable for under-cabinet installation.
Modes de funcionament
The Grundig LED Light Bar offers three operating modes for versatile use:
- Mode ON: La llum roman encesa contínuament.
- Mode OFF: La llum està apagada.
- AUTO (Motion Detection) Mode: The light automatically turns on when motion is detected and turns off after a period of inactivity. This mode is energy-efficient.
To switch between modes, locate the mode selection switch on the device and slide it to the desired setting.
Manteniment
To ensure optimal performance and longevity of your Grundig LED Light Bar, follow these maintenance guidelines:
- Neteja: Wipe the surface of the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Càrrega: Recharge the light bar via its USB port when the battery is low. Ensure you use a compatible 5V DC, 1A power source.
- Emmagatzematge: If storing the device for an extended period, ensure it is fully charged and stored in a cool, dry place.
Resolució de problemes
If you encounter issues with your LED light bar, refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | La bateria està esgotada. | Recharge the light bar using the provided USB cable. |
| Motion sensor not working in AUTO mode. | Insufficient ambient light or sensor obstruction. | Ensure the sensor is not blocked and test in a darker environment. Verify the mode switch is set to AUTO. |
| La llum parpelleja o és tènue. | Bateria baixa. | Recharge the light bar. |
Especificacions
| Marca | Grundig |
| Número de model | 8711252574158 |
| Poder | 1.5 watts |
| Voltage | 5 Volts DC |
| Actual | 1 Ampere |
| Nombre de LED | 48 |
| Flux lluminós | 85 lúmens |
| Dimensions (L x A x A) | 0.45 x 3.6 x 0.15 cm |
| Pes | 187 grams |
| Material | Metall |
| Color | Blanc |
| Característiques especials | Detector de moviment |
| Font d'alimentació | Alimentat per bateria (recarregable per USB) |
| Tipus d'instal·lació | Muntatge en superfície |
| Ús específic | Kitchen, Cabinet, Closet Lighting |
Garantia i Suport
Information regarding specific warranty terms and customer support contact details is typically provided with the product packaging or on the manufacturer's official weblloc. Consulteu aquests recursos per obtenir la informació més precisa i actualitzada.
For further assistance, please contact Grundig customer service.
