1. Introducció i informació de seguretat
Thank you for choosing the Eglo Amandolo LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before proceeding and retain them for future reference.
Instruccions importants de seguretat:
- Always disconnect the main power supply before installation, maintenance, or cleaning to prevent electric shock.
- Installation should be performed by a qualified electrician or a person with appropriate electrical knowledge to ensure compliance with local wiring regulations and safety standards.
- Assegureu-vos que la superfície de muntatge sigui estructuralment sòlida i que pugui suportar el pes de l'aparell.
- No modifiqueu l'aparell de cap manera. Les modificacions no autoritzades poden anul·lar la garantia i plantejar riscos per a la seguretat.
- Mantenir els materials d'embalatge fora de l'abast dels nens.
2. Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats abans de començar la instal·lació.
- Eglo Amandolo LED Ceiling Light (Model 901116)
- Control remot
- Maquinari de muntatge (cargols, tacs de paret)
- Manual d'usuari (aquest document)
Figure 1: Eglo Amandolo LED Ceiling Light (main unit)
3. Instruccions d'instal·lació
Follow these steps carefully to install your Eglo Amandolo LED Ceiling Light.
- Preparació per a la instal·lació: Turn off the main power supply at the circuit breaker before starting any electrical work. Ensure the power is completely off using a voltage provador.
- Instal·lació del suport de muntatge: Attach the mounting bracket to the ceiling using the provided screws and wall plugs. Ensure the bracket is securely fastened to a joist or suitable anchor point. Use a spirit level to ensure it is straight.
Figure 2: Mounting bracket and light fixture base
- Connexió elèctrica: Connect the household electrical wires to the terminals on the light fixture. Typically, this involves connecting the live (L), neutral (N), and ground (earth) wires. Ensure all connections are tight and secure. Refer to local electrical codes for proper wiring.
- Connecteu el dispositiu: Carefully align the light fixture with the mounting bracket and secure it in place using the screws provided. Ensure the fixture is flush against the ceiling.
- Restaura l'alimentació: Un cop instal·lat el dispositiu de manera segura i comprovats tots els connectors, restableu l'alimentació a l'interruptor.
4. Funcionament
Your Eglo Amandolo LED Ceiling Light is controlled by the included remote control. The remote requires 1 C-type battery (not included).
Funcions de control remot:
Figure 3: Remote Control for Eglo Amandolo LED Ceiling Light
- Encès/apagat: Premeu el botó Poder botó per encendre o apagar la llum.
- Ajust de brillantor: Utilitza el + i - buttons to increase or decrease the brightness of the main light.
- Ajust de temperatura de color: The main light (square luminous surface) can be adjusted from warm white to neutral white to cool white. Use the Icona del sol (warm) and Icona de floc de neu (cool) buttons to cycle through or fine-tune the color temperature.
- Control de retroiluminació RGB: The light bar features an RGB backlight. Press the RGB circle icon button to activate and cycle through various RGB colors for indirect lighting.
- Memory Functions (Heart 1 & 2): The remote may include programmable memory buttons (e.g., Heart 1, Heart 2) to save your preferred light settings for quick recall. Consult the remote's specific instructions for programming.
Modes de llum:
The main light provides 17 watts of power and 1900 lumens, offering versatile illumination for various environments.
Figure 4: Warm White Light Setting
Figure 5: Cool White Light Setting
The combination of adjustable main light and RGB backlight allows for creating various ambiances, from functional task lighting to decorative mood lighting for living rooms, bedrooms, dining rooms, or hallways.
5. Manteniment
To ensure the longevity and optimal performance of your Eglo Amandolo LED Ceiling Light, follow these maintenance guidelines:
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp drap per netejar la superfície de l'aparell. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat o els components elèctrics.
- Longevitat del LED: The integrated LED light sources are designed for long life and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Comandament a distància: Replace the C-type battery in the remote control when its performance diminishes. Ensure correct polarity when inserting new batteries.
6. Solució De Problemes
If you encounter issues with your Eglo Amandolo LED Ceiling Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha alimentació; cablejat solt; pila del comandament a distància esgotada. | Check circuit breaker. Verify wiring connections. Replace remote control battery. |
| La llum parpelleja o s'atenua inesperadament. | Unstable power supply; loose connection; incompatible dimmer switch (if applicable). | Check power supply stability. Tighten wiring connections. Ensure no external dimmer is used if not designed for it. |
| El comandament a distància no respon. | Depleted battery; remote out of range; obstruction between remote and light. | Replace remote control battery. Ensure remote is within effective range and has a clear line of sight to the fixture. |
| RGB backlight not working. | RGB function not activated; internal component issue. | Ensure the RGB button on the remote has been pressed. If the issue persists, contact customer support. |
If these solutions do not resolve the issue, please contact Eglo customer support for further assistance.
7. Especificacions
Detailed technical specifications for the Eglo Amandolo LED Ceiling Light (Model 901116).
- Marca: Eglo
- Número de model: 901116
- Dimensions del producte: 40 cm (llarg) x 20 cm (ample) x 6.5 cm (alçada)
- Pes de l'article: 510 grams
- Material: Metal (Aluminum/Steel)
- Color: Blanc
- Tipus de font de llum: LED integrat
- Potència: 17 watts
- Flux lluminós: 1900 lúmens
- Temperatura de color: Adjustable from Warm White (approx. 2700 Kelvin) to Cool White
- Característiques addicionals: Dimmable, RGB Backlight
- Control: Control remot
- Font d'alimentació: Elèctric per cable
- Classe d'eficiència energètica: F (for the contained light source)
Figura 6: Dimensions del producte
8. Garantia i Suport
Eglo products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Eglo website. If you require technical assistance or have questions not covered in this manual, please contact Eglo customer support through their official channels.
Eglo Official Weblloc: www.eglo.com