1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MONTECH HyperFlow ARGB 360 AIO CPU Liquid Cooler. Designed for optimal thermal performance, this cooler features an enhanced 3100RPM water pump and three Metal Pro 12 ARGB cooling fans, ensuring efficient heat dissipation for Intel and AMD compatible systems.
2. Característiques del producte
- Industry-leading 6-year warranty period for peace of mind.
- Gemstone design water pump with a rapid 3100RPM speed for efficient heat dissipation.
- Metal Pro 12 ARGB 28mm Fans operating at 2200 RPM for robust airflow pressure.
- Slim 27mm radiator with a single-row 20FPI fin design for powerful and efficient cooling.
- Flexible compatibility with Intel LGA 1700/1200/15X/2066 and AMD AM3/AM4/AM5 motherboard platforms.
- Simplified cable management with a pre-connected 7-pin short cable, compatible with 4-pin and 5V3pin connectors.
- Pre-installed fans and pre-applied thermal paste for quick setup.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- MONTECH HyperFlow ARGB 360 AIO Unit (Radiator, Pump, and Fans pre-assembled)
- Mounting Hardware for Intel LGA 1700/1200/15X/2066 sockets
- Mounting Hardware for AMD AM3/AM4/AM5 sockets
- Thermal Paste (pre-applied on cold plate)
- Thermal Paste Stencil (for reapplication)
- Manual d'usuari
4. Configuració i instal·lació
Follow these steps for proper installation of your HyperFlow ARGB 360 AIO cooler. Ensure your system is powered off and unplugged before proceeding.
4.1 Comprovació prèvia a la instal·lació
The fans are pre-installed on the radiator, and thermal paste is pre-applied to the cold plate. This simplifies the installation process significantly.
4.2 Muntatge del radiador i dels ventiladors
Mount the radiator and fans to an available 360mm mounting location in your PC case (e.g., top, front). Ensure proper airflow direction for optimal cooling.
4.3 Installing the Water Block
Select the appropriate mounting bracket for your CPU socket (Intel LGA 1700/1200/15X/2066 or AMD AM3/AM4/AM5). Secure the water block to your CPU according to the specific instructions for your motherboard and socket type. Ensure even pressure for proper thermal contact.
4.4 Connexions de cable
The cooler features a pre-connected 7-pin short cable for simplified wiring. Connect the 4-pin PWM connector to your motherboard's CPU_FAN header and the 5V3pin ARGB connector to a compatible ARGB header on your motherboard for lighting control.
5. Instruccions de funcionament
Once installed, the MONTECH HyperFlow ARGB 360 operates automatically, regulating pump and fan speeds based on CPU temperature. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
5.1 Fan and Pump Operation
- Bomba d'aigua: Operates at a maximum rotational speed of 3100 RPM, ensuring rapid coolant circulation.
- Ventiladors de refrigeració: Metal Pro 12 ARGB fans operate up to 2200 RPM, providing robust airflow.
- Nivell de soroll: The cooler is designed for quiet operation, with a typical noise level of 28 dB.
5.2 Control d'il·luminació ARGB
The ARGB lighting can be controlled via your motherboard's RGB software (if compatible with 5V3pin ARGB headers) or a dedicated ARGB controller (not included).
6. Manteniment
Regular maintenance ensures optimal performance and longevity of your AIO cooler.
- Eliminació de pols: Netegeu periòdicament la pols de les aletes del radiador i de les pales del ventilador amb aire comprimit o un raspall suau. Assegureu-vos que els ventiladors no girin durant la neteja.
- Pasta tèrmica: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the water block, clean off old thermal paste and apply new paste using the provided stencil for even coverage.
- Inspecció de tubs: Occasionally inspect the tubing for any signs of kinks, leaks, or damage.
7. Solució De Problemes
Si teniu problemes amb el vostre refrigerador, consulteu els passos habituals següents per a la resolució de problemes:
- Temperatures altes de la CPU:
- Ensure the water block is securely mounted and making good contact with the CPU.
- Verify that the pump is running (you may feel a slight vibration or hear a faint hum). Check pump power connection.
- Confirm fans are spinning and airflow is unobstructed.
- Check thermal paste application. Reapply if necessary.
- Els ventiladors no giren / L'ARGB no s'il·lumina:
- Check all power and ARGB cable connections to the motherboard.
- Ensure appropriate headers are enabled in BIOS/UEFI.
- Test fans/ARGB with different headers or a known working setup if possible.
- Sorolls inusuals:
- A gurgling sound immediately after installation may indicate air bubbles. This usually resolves itself over time.
- Ensure no cables are interfering with fan blades.
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | HyperFlow ARGB 360 Black |
| Dimensions del producte | 15.63" de llargada x 4.72" d'amplada x 1.06" d'alçada (39.7 x 12 x 2.7 cm) |
| Pes | 4.23 lliures (1.92 kg) |
| Mètode de refrigeració | Refrigeració per aigua |
| Velocitat de la bomba | Màxim 3100 RPM |
| Velocitat del ventilador | Max 2200 RPM (Metal Pro 12 ARGB) |
| Nivell de soroll | 28 dB (típic) |
| Tipus de connector d'alimentació | 4-Pin (PWM) |
| Tipus de connector ARGB | 5V3pin |
| Voltage | 5 Volts |
| Wattage | 14.28 watts |
| Dispositius compatibles | Ordinador de jocs |
| Compatibilitat de socket de CPU | Intel LGA 1700/1200/15X/2066, AMD AM3/AM4/AM5 |
| Material del radiador | Aluminum (with 20 FPI fin design) |
9. Garantia i Suport
MONTECH provides an industry-leading 6 any de garantia for the HyperFlow ARGB 360 AIO CPU Liquid Cooler. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact MONTECH customer service through their official weblloc web o el venedor on es va comprar el producte.
