Manual d'instruccions de l'interruptor intel·ligent Leviton Decora Z-Wave sèrie 800 (ZW15S-1RW)

1. Introducció

This manual provides detailed instructions for the installation, setup, and operation of your Leviton Decora Smart Switch Z-Wave 800 Series, model ZW15S-1RW. This device integrates into Z-Wave enabled networks to provide smart control over connected lighting and other loads.

The ZW15S-1RW switch is designed for compatibility with various Z-Wave hubs and devices, offering features such as remote access, scheduling, and voice control. It also functions as a Z-Wave repeater to enhance network reliability.

2. Informació de seguretat

WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT THE CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING! INSTALL ONLY BY A QUALIFIED ELECTRICIAN.

• Aquest dispositiu està dissenyat per a la instal·lació d'acord amb el Codi elèctric nacional i les normatives locals.
• Utilitzeu només coure o filferro revestit de coure.
• Assegureu-vos que totes les connexions dels cables estiguin segures.
• Avís de la Proposició 65: Aquest producte pot contenir substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius.

3. Contingut del paquet

El vostre paquet ha de contenir els elements següents:

• Leviton Decora Smart Switch Z-Wave 800 Series (ZW15S-1RW)
• Manual d'instruccions

4. Instal·lació

The ZW15S-1RW switch is designed to replace an existing standard wall switch. A neutral connection is required for proper operation. The slim design and wire leads facilitate installation.

4.1 Instruccions de cablejat

1. Apagueu l'alimentació a l'interruptor o al fusible.
2. Traieu la placa de paret existent i l'interruptor.
3. Identify the Line (hot), Load, Neutral, and Ground wires.
4. Connect the ZW15S-1RW switch wires to the corresponding house wires according to the wiring diagram provided with the product.
5. Securely fasten the switch into the wall box.
6. Install the included screwless wallplate for a clean finish. Optional DDKIT faceplates are available in six colors for customization.
7. Resta l'alimentació al disjuntor.

4.2 3-Way or Multi-Location Control

For installations requiring control from multiple wall locations (e.g., 3-way or 4-way circuits), the ZW15S-1RW switch can be paired with a DD0SR Wired Switch Companion (sold separately).

5. Configuració

The Decora Smart Switch Z-Wave 800 Series is Z-Wave Plus certified, offering advanced features for integration into your smart home system.

5.1 Inclusió de la xarxa Z-Wave

To enable smart control features, the switch must be included in a compatible Z-Wave hub. The 800 Series supports multiple enrollment methods:

• SmartStart Enrollment: If your Z-Wave controller supports SmartStart inclusion, scan the QR code on the device or packaging.
• Seguretat S2: The device supports S2 security for enhanced network protection.
• Classic Inclusion: Follow your Z-Wave hub's instructions for classic inclusion mode.
• Network Wide Inclusion: This method allows inclusion even if the device is not in direct range of the controller.

The ZW15S-1RW acts as a repeater, strengthening your Z-Wave mesh network and improving overall reliability. It is backwards compatible with any Z-Wave network.

5.2 Smart Home System Compatibility

The Leviton Decora Smart Switch is compatible with various Z-Wave hubs and smart home platforms, enabling remote access, voice commands, and scheduling capabilities. Compatible systems include:

• Samsung SmartThings
• Home Assistant (via Z-Wave)
• Ring (requires Ring Alarm)
• Alarm.com
• Amazon Alexa (via compatible Z-Wave hub)
• Google Home (via compatible Z-Wave hub)

6. Instruccions de funcionament

6.1 Control manual

Press the top of the paddle to turn the connected load ON. Press the bottom of the paddle to turn the connected load OFF.

6.2 Funcions de control intel·ligent

Once successfully paired with a Z-Wave hub, you can utilize the following smart features:

• Accés remot: Control your lights from anywhere using your smart home app.
• Programació: Set schedules for lights to turn on or off automatically, for example, turning on exterior lights at sunset.
• Control de veu: Use voice commands through compatible assistants like Amazon Alexa or Google Home to operate your switch.

The ZW15S-1RW supports on/off switching for various loads up to 15A and 3/4 HP, including lights, ceiling fans, exhaust fans, motors, and pumps.

7. Manteniment

To maintain the appearance and functionality of your Decora Smart Switch, wipe it with a soft, damp drap. Eviteu utilitzar netejadors o dissolvents abrasius, ja que poden danyar l'acabat o els components interns.

8. Solució De Problemes

• L'interruptor no respon: Ensure power is supplied to the switch. Check the circuit breaker. Verify the switch is properly wired.
• Difficulty Pairing with Z-Wave Hub: Ensure the switch is within range of the Z-Wave hub. Try moving the hub closer temporarily during inclusion. Refer to your Z-Wave hub's manual for specific inclusion steps.
• Connectivitat intermitent: The ZW15S-1RW acts as a Z-Wave repeater. Ensure you have a robust Z-Wave mesh network with other Z-Wave devices to improve signal strength and reliability.
• Indicador LED: The LED illuminates when the lights are off, making it easy to locate the switch in the dark. If the LED is not functioning, check power and wiring.

9. Especificacions

10. Garantia i Suport

Leviton provides award-winning technical support for its products. The Decora Smart Switch Z-Wave 800 Series is CSA certified for both the USA and Canada.

For specific warranty details and technical assistance, please refer to the official Leviton weblloc web o contacteu directament amb el seu servei d'atenció al client.