Introducció
Thank you for choosing BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new car speakers. Please read this manual thoroughly before installation and keep it for future reference. Proper installation ensures optimal performance and longevity of the product.
Image: BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers shown with their retail packaging, highlighting the product and its branding.
Informació de seguretat
Observeu sempre les següents precaucions de seguretat durant la instal·lació i el funcionament:
- Disconnect the vehicle's battery negative terminal before starting any electrical work to prevent short circuits.
- Ensure all wiring is properly insulated to prevent damage to the vehicle's electrical system or the speakers.
- Do not install speakers in locations that obstruct the driver's view or interfere with vehicle safety features (e.g., airbags).
- Use appropriate tools and wear safety glasses during installation.
- Eviteu escoltar àudio a volums excessivament alts durant períodes prolongats, ja que això pot causar danys auditius.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 2 x BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers
- 2 x reixes d'altaveus
- Maquinari de muntatge (cargols, clips)
Configuració i instal·lació
Careful installation is crucial for optimal sound quality and speaker longevity. If you are unsure about any step, consult a professional car audio installer.
1. Comprovacions prèvies a la instal·lació
- Confirm speaker compatibility with your vehicle's existing speaker openings. The mounting hole diameter is 6.06" x 8.74".
- Check the available mounting depth. The top mount depth for these speakers is 1.42".
- Ensure you have all necessary tools: screwdrivers, wire strippers, crimpers, drill (if new holes are needed), and safety gear.
2. Muntatge dels altaveus
- Carefully remove the existing speakers or trim panels from the desired installation location (e.g., door panels, rear deck).
- Position the new BPS-E693 speaker in the opening. Ensure it fits without obstruction.
- Mark the screw holes if they do not align with existing ones. Drill pilot holes if necessary, being careful not to damage any underlying wiring or vehicle components.
- Secure the speaker using the provided mounting hardware. Do not overtighten the screws.
- Attach the speaker grille over the installed speaker for protection and a finished look.
Imatge: Side profile view of the BLAUPUNKT BPS-E693 speaker, illustrating its shallow mounting depth for easier installation in various vehicle types.
Image: The BLAUPUNKT BPS-E693 speaker with its protective grille in place, demonstrating the finished appearance after installation.
3. Wiring the Speakers
The BPS-E693 speakers are designed for straightforward connection to your car's audio system.
- Identify the positive (+) and negative (-) terminals on the speaker. These are typically marked on the speaker's terminal block.
- Connect the positive (+) speaker wire from your car's audio system to the positive (+) terminal on the speaker.
- Connect the negative (-) speaker wire from your car's audio system to the negative (-) terminal on the speaker.
- Assegureu-vos que totes les connexions estiguin ben fixades i degudament aïllades per evitar curtcircuits i pèrdues de senyal.
- Once wired, reassemble any removed trim panels.
Imatge: Part posterior view of the BLAUPUNKT BPS-E693 speaker, clearly showing the magnet structure and the speaker terminals for wiring connections.
Instruccions de funcionament
After successful installation, you can begin enjoying your new BLAUPUNKT speakers.
- Turn on your car's audio system.
- Start with the volume at a low level and gradually increase it to a comfortable listening level.
- Adjust the bass, treble, and balance settings on your head unit to fine-tune the sound to your preference. The 3-way design of these speakers provides a full range of sound, allowing for detailed adjustments.
- Avoid pushing the speakers to extreme volumes for extended periods, as this can lead to distortion and potential damage.
Manteniment
To ensure the longevity and optimal performance of your BLAUPUNKT speakers, follow these simple maintenance guidelines:
- Neteja: Use a soft, dry cloth to gently wipe dust from the speaker grilles and cones. Avoid using harsh chemicals or abrasive cleaners.
- Inspecció: Periodically check the speaker connections to ensure they are secure.
- Medi ambient: Protect the speakers from excessive moisture and direct sunlight, which can degrade materials over time.
Resolució de problemes
Si teniu problemes amb els altaveus, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus | Loose or incorrect wiring; head unit off or muted; amplifier issue (if applicable) | Check all wiring connections for security and correct polarity. Ensure head unit is on and not muted. Verify amplifier is powered and functioning. |
| So distorsionat o poc clar | Volume too high; incorrect audio settings; damaged speaker wire; speaker damage | Reduce volume. Adjust bass/treble settings. Inspect speaker wires for fraying or damage. If distortion persists at moderate volumes, speaker may be damaged. |
| Un altaveu no funciona | Loose connection to that specific speaker; balance setting incorrect; speaker damage | Check wiring for the non-working speaker. Adjust the balance setting on your head unit. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/head unit channel. |
Especificacions
Detailed technical specifications for the BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers:
| Característica | Especificació |
|---|---|
| Nom del model | 850053034145 |
| Tipus d'altaveu | Coaxial, 3 vies |
| Mida de l'altaveu | 6x9 polzades |
| Diàmetre del woofer | 6 Inches (part of 6x9 oval) |
| Potència màxima de sortida | 140 watts (per parell) |
| Potència de sortida RMS | 70 watts (per parell) |
| Sensibilitat | 86.5 dB |
| Diàmetre del forat de muntatge | 6.06 cm x 8.74 cm |
| Top Mount Depth | 1.42" |
| Dimensions del producte | 5 "P x 7" W x 9" H |
| Pes de l'article | 2.84 quilograms (6.24 lliures) |
| Components inclosos | 2 x altaveu |
| Tecnologia de connectivitat | RCA (for audio signal input) |
| Mode de sortida d'àudio | estèreo |
| Tipus de muntatge | Porta |
| És impermeable | FALSA |
Informació de la garantia
BLAUPUNKT BPS-E693 speakers come with a Limited Warranty. Please refer to the warranty card included with your product or contact BLAUPUNKT customer support for specific terms and conditions regarding coverage, duration, and service procedures.
Suport
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BLAUPUNKT customer support. Contact information can typically be found on the official BLAUPUNKT weblloc web o a l'embalatge del producte.
