Singer C7225 Computerized Sewing Machine User Manual

Introducció

Thank you for choosing the Singer C7225 Computerized Sewing Machine. This manual provides comprehensive instructions for the safe operation, setup, maintenance, and troubleshooting of your new sewing machine. Please read this manual thoroughly before using the machine to ensure proper function and to maximize your sewing experience.

The Singer C7225 is designed for a wide range of sewing projects, offering advanced features and ease of use for both beginners and experienced sewers.

Instruccions importants de seguretat

Quan utilitzeu un aparell elèctric, sempre s'han de seguir les precaucions bàsiques de seguretat, com ara les següents:

• Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning, removing covers, or making any user servicing adjustments.
• No permetre que s'utilitzi com a joguina. Cal prestar molta atenció quan aquest aparell és utilitzat per o a prop dels nens.
• Utilitzeu aquest aparell només per a l'ús previst tal com es descriu en aquest manual. Utilitzeu només els accessoris recomanats pel fabricant tal com s'inclouen en aquest manual.
• No feu servir mai aquest aparell si té un cable o un endoll danyats, si no funciona correctament, si s'ha caigut o s'ha fet malbé, o si ha caigut a l'aigua.
• Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.
• Mantingueu els dits allunyats de totes les parts en moviment. Es requereix una cura especial al voltant de l’agulla de la màquina de cosir.
• Utilitzeu sempre la placa d'agulla adequada. La placa incorrecta pot fer que l'agulla es trenqui.
• No estireu ni empenyeu la tela mentre cosiu. Això pot desviar l'agulla i fer-la trencar.
• Turn the sewing machine off when making any adjustments in the needle area, such as threading the needle, changing the needle, threading the bobbin, or changing the presser foot.
• Always unplug the sewing machine from the electrical outlet when removing the covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

Producte acabatview

Familiarize yourself with the main components of your Singer C7225 sewing machine.

Figura 1: Davant view of the Singer C7225 sewing machine, showcasing the main body, needle area, and control panel with various stitch patterns.

Figura 2: lateral view of the Singer C7225, highlighting the handwheel and the power input port at the rear.

Figura 3: posterior view of the Singer C7225, showing the power switch and power cord connection point.

Figura 4: Primer pla frontal view of the Singer C7225, focusing on the needle, presser foot, and bobbin area.

Components clau:

• Placa d'agulla: The metal plate under the needle, often with seam allowance guides.
• Peu premsador: Holds the fabric firmly against the feed dogs while sewing.
• Gossos d'alimentació: Teeth-like mechanisms that move the fabric under the presser foot.
• Bobbin Case: Holds the bobbin, which supplies the lower thread.
• Thread Guides: Paths for the upper thread to follow from the spool to the needle.
• Dial de tensió: Ajusta la tensió del fil superior.
• Volant: Puja i baixa l'agulla manualment.
• Panell de control/Pantalla LCD: For selecting stitches, adjusting settings, and viewing informació.
• Foot Controller Port: Where the foot pedal is connected.
• Interruptor d'alimentació: Encén i apaga la màquina.

Configuració

1. Desembalatge i col·locació:

1. Carefully remove the machine from its packaging. Retain all packaging materials for future storage or transport.
2. Place the machine on a stable, flat surface with adequate lighting. Ensure there is enough space around the machine for fabric handling.

2. Connexió d'alimentació:

1. Locate the power cord and foot controller.
2. Insert the foot controller plug into the foot controller port on the machine.
3. Insert the power cord plug into the power input port on the machine.
4. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent adequada.
5. Turn on the power switch, usually located on the side or rear of the machine. The LCD screen should illuminate.

3. Winding the Bobbin:

1. Col·loqueu una bobina de fil al portacarret.
2. Follow the bobbin winding path indicated by the arrows on the machine.
3. Place an empty bobbin onto the bobbin winding spindle.
4. Push the bobbin winding spindle to the right.
5. Press the foot controller or start/stop button to begin winding. Stop when the bobbin is full.
6. Tallar el fil i treure la bobina.

4. Inserting the Bobbin:

1. Obriu la placa de la coberta de la bobina.
2. Introduïu la bobina enrotllada a la caixa de la bobina, assegurant-vos que el fil es desenrotlli en la direcció correcta (normalment en sentit antihorari).
3. Guieu el fil a través de la molla tensora i cap a la ranura del guiafils.
4. Substituïu la placa de coberta de la bobina.

5. Threading the Upper Thread:

1. Aixequeu el aixecador del peu premsador.
2. Col·loqueu una bobina de fil al portacarret.
3. Seguiu la ruta d'enfilat numerada que s'indica a la màquina, assegurant-vos que el fil passi per totes les guies i la palanca tirafils.
4. Thread the needle from front to back using the automatic needle threader if available, or manually.
5. Estireu uns 6 polzades de fil per l'ull de l'agulla.

6. Bringing Up the Bobbin Thread:

1. Hold the upper thread lightly.
2. Turn the handwheel towards you to lower the needle into the needle plate and then raise it again.
3. The upper thread will catch the bobbin thread, forming a loop. Pull the loop up through the needle plate opening.
4. Pull both upper and bobbin threads under the presser foot and towards the back of the machine.

Instruccions de funcionament

1. Selecting a Stitch:

• Enceneu la màquina.
• Use the stitch selection buttons or dial on the control panel to choose your desired stitch. The selected stitch will be displayed on the LCD screen.
• The C7225 offers a wide variety of utility, decorative, and alphanumeric stitches.

2. Adjusting Stitch Settings:

• Longitud de la puntada: Adjust the length of each stitch using the dedicated buttons. Longer stitches are for basting or thicker fabrics, shorter for fine details.
• Amplada de punt: Adjust the width for zigzag or decorative stitches.
• Tensió del fil: The machine typically sets tension automatically, but manual adjustment may be needed for specific fabrics or threads. Refer to the tension dial.
• Posició de l'agulla: Adjust the needle position (left, center, right) for certain techniques like topstitching or zipper insertion.

3. Començant a cosir:

1. Place the fabric under the presser foot, aligning the edge with a seam guide on the needle plate.
2. Baixeu el peu de premsa.
3. Press the foot controller gently or press the Start/Stop button to begin sewing.
4. Guide the fabric gently with both hands, but do not push or pull it. Allow the feed dogs to move the fabric.
5. To reverse stitch (for securing seams), press and hold the reverse button.
6. When finished, press the Start/Stop button or release the foot controller.
7. Puja l'agulla a la posició més alta amb el volant.
8. Aixequeu el peu de premsa.
9. Pull the fabric towards the back and cut the threads using the thread cutter on the machine.

4. Changing Needles and Presser Feet:

• Changing Needles: Always turn off the machine before changing the needle. Loosen the needle clamp screw, remove the old needle, insert the new needle with the flat side facing the back, and tighten the screw. Use the correct needle type and size for your fabric.
• Changing Presser Feet: Raise the presser foot lifter. Press the release button on the back of the presser foot holder to detach the current foot. Position the new presser foot under the holder and lower the presser foot lifter until it snaps into place.

Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la teva màquina de cosir.

1. Neteja:

• Després de cada ús: Use a small brush to remove lint and dust from the bobbin area and under the needle plate.
• Regularment: Remove the needle plate and clean the feed dogs and bobbin case area thoroughly. A small vacuum attachment can be helpful.
• Exterior: Netegeu l'exterior de la màquina amb un damp tela. No utilitzeu productes químics durs.

2. Oiling:

The Singer C7225 is largely self-lubricating. Refer to the full instruction manual for specific oiling points if necessary. Over-oiling can cause issues.

3. Emmagatzematge:

When not in use, cover the machine with a dust cover to protect it from dust and debris. Store in a dry, cool place.

Resolució de problemes

Aquesta secció tracta problemes comuns que podeu trobar. Per a problemes més complexos, poseu-vos en contacte amb l'atenció al client.

Especificacions

Garantia i Suport

Informació de la garantia: The Singer C7225 sewing machine comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

Atenció al client: For technical assistance, spare parts, or service, please contact Singer customer support. Contact details can typically be found on the Singer official weblloc web o a la targeta de garantia.

Recursos en línia: Visit the official Singer website for additional resources, including FAQs, video tutorials, and updated information about your C7225 model.