Manual d'instruccions del teclat mecànic Ducky One 3 Black 60%

1. Introducció

The Ducky One 3 series mechanical keyboard is designed with QUACK Mechanics, focusing on aesthetics, hot-swappable functionality, sound dampening, and high-quality stabilizers. This 60% form factor keyboard offers a compact design without compromising performance, featuring Cherry Speed Silver Switches and durable PBT Doubleshot keycaps.

Característiques principals:

• Ducky's QUACK Mechanics design philosophy for enhanced performance and aesthetics.
• Dual-layer hot-swappable PCB with exclusive Kailh yellow hot-swap sockets.
• Pro baixfile One 3 case design.
• Dual-layer high-grade silicone and EVA foam sound dampeners for improved acoustics.
• Thick PBT Double-shot seamless keycaps for durability and clear legends.
• Per-key programmable RGB backlighting.
• 3-level adjustable feet for ergonomic comfort.
• Detachable braided USB-C cable for easy connectivity and portability.
• Improved PCB design, V2 stabilizers, and remapped macro layout.
• N-key rollover for accurate and simultaneous key presses.

2. Què hi ha a la caixa

• Ducky One 3 Black 60% Mechanical Keyboard
• Extractor de tecles
• USB Cable (detachable braided USB-C)
• Ducky Channel Sticker
• Accent Keys (additional keycaps for customization)

3. Configuració

1. Connecteu el teclat: Plug the detachable USB-C end of the provided cable into the USB-C port on the back of the keyboard. Connect the USB-A end of the cable to an available USB port on your computer.
2. Encesa inicial: The keyboard should automatically power on and the RGB backlighting will illuminate.
3. Ajusta l'angle del teclat: Utilize the 3-level adjustable feet located on the underside of the keyboard to set your preferred typing angle.

4. Instruccions de funcionament

4.1 Ús bàsic

The Ducky One 3 keyboard functions as a standard 60% mechanical keyboard. All primary keys (letters, numbers, basic punctuation) operate as expected. Due to its compact size, some functions are accessed via combination keys.

4.2 Capa de funcions (tecla Fn)

Many keys have secondary functions printed on their front or side. To access these functions, hold down the Fn key (located on the bottom right) and then press the desired key. Common Fn combinations include:

• Fn + Number Row: Accesses F1-F12 keys.
• Fn + Tecles de fletxa: Controls cursor movement (if dedicated arrow keys are not present).
• Fn + Media Keys: Controls volume, playback, etc. (refer to keycap legends).

4.3 RGB Backlighting Customization

The Ducky One 3 features per-key programmable RGB backlighting. Specific key combinations (often involving the Fn key and other designated keys) allow you to change lighting modes, colors, brightness, and speed. Refer to the official Ducky software or the keyboard's quick start guide for detailed instructions on RGB customization patterns and controls.

5. Manteniment

5.1 Neteja del teclat

• Neteja general: Utilitzeu un drap suau i sense pelusa lleugerament dampNetegeu les tecles i la carcassa amb aigua o una solució de neteja suau. Eviteu la humitat excessiva.
• Neteja profunda (tecles): Use the included keycap puller to carefully remove keycaps. Clean the keycaps with warm, soapy water, rinse thoroughly, and ensure they are completely dry before reattaching.
• Neteja sota les tecles: Use compressed air to blow out dust and debris from between the switches. A small brush can also be used to dislodge stubborn particles.

5.2 Commutadors intercanviables en calent

The Ducky One 3 features a hot-swappable PCB, allowing you to change switches without soldering. This model comes with Cherry Speed Silver Switches, but you can replace them with other compatible 3-pin or 5-pin mechanical switches.

1. Extracció d'un interruptor: Use a switch puller (not included, but a keycap puller can sometimes assist) to gently grip the top and bottom clips of the switch and pull it straight up.
2. Instal·lació d'un nou interruptor: Align the pins of the new switch with the holes on the PCB. Gently push the switch down until it clicks into place. Ensure the switch is seated correctly and the pins are not bent.

6. Solució De Problemes

• El teclat no respon:
  • Assegureu-vos que el cable USB-C estigui connectat correctament tant al teclat com a l'ordinador.
  • Prova de connectar el teclat a un port USB diferent de l'ordinador.
  • Prova el teclat en un altre ordinador si és possible per descartar un problema específic de l'ordinador.
• Llums RGB no funcionen/incorrectes:
  • Check the keyboard's manual or Ducky's website for specific key combinations to reset or cycle through RGB modes.
  • Ensure Ducky's software (if installed) is up-to-date and correctly configured.
• Keys Not Registering or Double-Typing (Chattering):
  • Carefully remove the keycap and switch for the affected key. Inspect the switch for any visible damage or debris.
  • If the switch is hot-swappable, try replacing it with a new one or swapping it with a less frequently used key to diagnose if the switch itself is faulty.
  • Assegureu-vos que l'interruptor estigui completament encaixat a la placa de circuit imprès.

7. Especificacions

8. Vídeos oficials de productes

9. Garantia i Suport

For warranty information, technical support, or further assistance, please refer to the official Ducky Channel weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Podeu visitar el Ducky Store on Amazon per obtenir més informació sobre el producte i recursos.