WALI Dual Monitor Wall Mount (Model 012ARM) Instruction Manual

1. Introducció

This manual provides detailed instructions for the proper installation, operation, and maintenance of your WALI Dual Monitor Wall Mount (Model 012ARM). Please read this manual thoroughly before installation to ensure safe and correct usage. Retain this manual for future reference.

2. Informació de seguretat

• Important: This dual monitor wall mount is designed for installation on concrete or brick walls only. Do not install on drywall or plaster walls without proper reinforcement.
• Ensure the mounting surface can safely support the combined weight of the mount and two monitors.
• No supereu la capacitat màxima de pes de 22 lliures (10 kg) per braç.
• Use all provided hardware and follow installation steps precisely. If any parts are missing or damaged, contact WALI customer support.
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.
• Reviseu periòdicament totes les connexions i elements de fixació per assegurar-vos que es mantinguin segurs.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats:

• WALI Dual Monitor Arm x 1
• Kit de ferreteria de muntatge (cargols, ancoratges, volanderes)
• Manual d'usuari (aquest document)

4. Característiques del producte

The WALI Dual Monitor Wall Mount offers versatile functionality for an optimized workspace:

• Disseny de muntatge a la paret: Securely mounts two monitors on concrete or brick walls, providing a space-saving solution. The curved arm design helps optimize viewangles d'ajust.
• Horizontal Adapter Arm: Can convert a single monitor mount into a dual monitor setup using the central mounting plate. Ensure your existing mount's VESA hole pattern is 75mm or 100mm.
• Àmplia compatibilitat: Supports two monitors up to 27 inches, with a maximum weight capacity of 22 lbs (10 kg) per arm. Compatible with VESA mounting patterns from 75x75mm to 100x100mm.
• Adjustable Distance: The adjustable distance between the two VESA mounting plates ranges from 16 to 28.5 inches, allowing for flexible monitor positioning.
• Ajust ergonòmics: Offers tilt of +45°/-45°, swivel of +15°/-15°, and 360° rotation (+180°/-180°). These adjustments help achieve a comfortable and correct viewing position, reducing neck and eye strain. Note: When wall mounted, the tilt and swivel functions may be more limited compared to desk-mounted setups.

Figure 1: Display Compatibility (Max 10kg/22lbs, VESA 75x75/100x100mm, Max 27" Screen)

Figure 2: Adjustable Distance between VESA Centers (Min 16", Max 28.5")

Figure 3: Angle Adjustment Capabilities (Tilt, Swivel, Rotation)

Figure 4: 360 Degree Rotation Example

Figure 5: Single to Double VESA Bracket Adapter in use on a desk mount.

5. Especificacions

Figure 6: Dimensional Diagram of the Mount

6. Configuració i instal·lació

This section outlines the steps for installing your WALI Dual Monitor Wall Mount. Ensure you have all necessary tools and that your wall is suitable for mounting (concrete or brick).

6.1 Instruccions de muntatge a la paret

1. Prepara el mur: Identify the desired mounting location on a solid concrete or brick wall. Mark the drilling points for the wall plate.
2. Forats: Amb una broca adequada per al tipus de paret, perforeu forats pilot als llocs marcats.
3. Fixeu la placa de paret: Secure the wall plate to the wall using the provided anchors and screws. Ensure it is level and firmly attached.
4. Assemble Monitor Arm: Attach the horizontal arm to the wall plate.
5. Fixeu les plaques VESA als monitors: Secure the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
6. Mount Monitors: Carefully slide the monitors (with VESA plates attached) onto the ends of the horizontal arm. Secure them in place with the locking mechanisms.
7. Gestió de cables: Route monitor cables through the integrated cable management clips on the arm for a tidy setup.

Figura 7: Mésview of Wall Installation

Figure 8: Detail of Wall Mounting Plate and Arm Connection

6.2 Guia de vídeo d'instal·lació

7. Operation & Adjustments

Once installed, your WALI Dual Monitor Wall Mount allows for various adjustments to achieve optimal viewcomoditat.

• Ajust d'inclinació: Use the provided tool (if applicable) to adjust the tilt angle of your monitors up to +/- 45 degrees. Loosen the tilt screw, set the desired angle, and re-tighten.
• Ajust de gir: Monitors can be swiveled up to +/- 15 degrees. Gently move the monitor to the desired left or right angle.
• Ajust de rotació: Rotate your monitors 360 degrees (from landscape to portrait orientation and vice-versa) by gently turning them.
• Horizontal Distance Adjustment: The VESA plates can slide along the horizontal arm to adjust the spacing between your monitors, from 16 to 28.5 inches (center to center). Loosen the securing screws, slide to the desired position, and re-tighten.

7.1 Producte acabatview and Adjustment Video

8. Manteniment

To ensure the longevity and safe operation of your monitor mount, perform the following maintenance:

• Neteja: Netegeu la muntura amb un drap suauamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Comprovació periòdica: Cada pocs mesos, comproveu tots els cargols i connexions per assegurar-vos que encara estiguin ben ajustats i segurs. Torneu a apretar-los si cal.
• Inspeccionar el desgast: Look for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

9. Solució De Problemes

If you encounter any issues with your WALI Dual Monitor Wall Mount, refer to the following common problems and solutions:

• Monitors are sagging or not holding position:
  • Ensure all VESA plate screws are securely tightened to the monitors.
  • Verify that the monitors' weight does not exceed the 22 lbs (10 kg) per arm limit.
  • Check the tightness of the adjustment screws on the arm joints. Adjust as needed to increase friction and hold the desired position.
• Mount feels unstable on the wall:
  • Re-check all wall plate screws and anchors to ensure they are fully tightened into the concrete or brick wall.
  • Confirm that the wall material is indeed concrete or brick, as specified. This mount is not designed for drywall without additional structural support.
• Difficulty adjusting tilt, swivel, or rotation:
  • Ensure no cables are snagged or obstructing movement.
  • Loosen the relevant adjustment screws slightly to allow for movement, then re-tighten once the desired position is achieved.

If these steps do not resolve your issue, please contact WALI customer support for further assistance.

10. Garantia i assistència

WALI provides experienced and friendly US-based customer support available to assist 7 days a week. For warranty information or technical assistance, please refer to the contact details provided with your product or visit the official WALI weblloc.