Focal Aria K2 936 Floorstanding Speaker User Manual

1. Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your Focal Aria K2 936 floorstanding loudspeaker. Please read these instructions carefully before using your speaker to ensure optimal performance and longevity.

The Focal Aria K2 936 is a high-fidelity 3-way bass-reflex floorstanding loudspeaker, featuring Focal's renowned K2 Power cone technology and an Ash Grey premium finish. It is designed for critical music listening in a dedicated home environment.

Image: Focal Aria K2 936 floorstanding speaker with its protective grille installed, viewed des d'un angle.

2. Instruccions de seguretat

To prevent damage and ensure safe operation, observe the following precautions:

• Col·locació: Position speakers on a stable, level surface. Avoid placing them near heat sources, direct sunlight, or in areas with high humidity. Ensure adequate ventilation around the speaker.
• Potència: Connect speakers only to amplifiers within the recommended power range (50 - 300W). Overpowering can cause damage.
• cables: Use high-quality speaker cables and ensure correct polarity (+ to + and - to -) for all connections.
• Neteja: Desconnecteu l'aparell de la xarxa elèctrica abans de netejar-lo. Feu servir un drap suau i sec. Eviteu netejadors líquids o materials abrasius.
• Ventilació: Do not block the bass-reflex ports or any ventilation openings.
• Manteniment: Do not attempt to service the speaker yourself. Refer all servicing to qualified personnel.

3. Contingut del paquet

Carefully unpack your Focal Aria K2 936 speaker and verify that all components are present:

• Focal Aria K2 936 Floorstanding Loudspeaker (1 unit)
• Reixa protectora
• Placa base
• Adjustable Spikes (with spanner)
• Manual d'usuari (aquest document)

If any items are missing or damaged, contact your dealer immediately.

4. Configuració

4.1 Unpacking and Base Installation

1. Carefully remove the speaker from its packaging.
2. Attach the provided base plate to the bottom of the speaker using the supplied screws. Ensure it is securely fastened.
3. Screw the adjustable spikes into the base plate. These spikes help decouple the speaker from the floor, improving sound clarity. Use the spanner to adjust their height for stability and level positioning.

4.2 Col·locació dels altaveus

La col·locació òptima dels altaveus és crucial per a la qualitat del so. Tingueu en compte el següent:

• Stereo Imaging: For a stereo setup, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
• Distància des de Walls: Avoid placing speakers too close to walls, as this can exaggerate bass frequencies. Experiment with distances to find the best balance.
• Cap endins: Slightly angle the speakers inward towards the listening position (toe-in) to optimize the soundstage.

Image: Diagram illustrating the height (45.25"), depth (14.62"), and width (11.56") of the Focal Aria K2 936 speaker.

4.3 Connexió a un Ampmés viu

The Aria K2 936 features high-quality binding posts for ampconnexió de lifier.

1. Assegureu-vos el vostre ampL'amplificador s'apaga abans de fer cap connexió.
2. Connect the positive (+) terminal (red) of the speaker to the positive (+) terminal of the corresponding ampcanal lifier.
3. Connect the negative (-) terminal (black) of the speaker to the negative (-) terminal of the corresponding ampcanal lifier.
4. Assegureu-vos que totes les connexions estiguin ben ajustades i segures per evitar pèrdues de senyal o curtcircuits.

Imatge: Part posterior view of the Focal Aria K2 936 speaker, highlighting the input terminals for ampconnexió de lifier.

5. Instruccions de funcionament

5.1 Engegada inicial

Once all connections are made, you can power on your amplifier. Start with the volume at its lowest setting and gradually increase it to a comfortable listening level.

5.2 Període de rodatge

Your Focal Aria K2 936 speakers require a break-in period to reach their full sonic potential. This typically involves 20-30 hours of playback at moderate volume. During this time, the drivers will loosen up, and the sound quality will improve, particularly in the bass and midrange.

5.3 AmpCoincidència de lifier

The Aria K2 936 has an impedance of 8 ohms and a recommended input power range of 50 - 300W. Ensure your amplifier's output power falls within this range to prevent damage to either the amplifier or the speakers and to achieve optimal sound reproduction.

6. Manteniment

Regular maintenance will keep your speakers looking and sounding their best:

• Neteja d'armaris: Use a soft, dry, lint-free cloth to wipe down the cabinet. For stubborn marks on the Ash Grey finish or leather-effect front panel, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals.
• Atenció al conductor: The K2 cones are durable but should not be touched directly. If dust accumulates, use a soft brush or compressed air from a distance.
• Neteja de reixes: The magnetic cloth frame grille can be gently vacuumed or brushed to remove dust.

7. Solució De Problemes

If you encounter issues with your speakers, consult this section before contacting support:

• Sense so:
  • Check all cable connections between the amplifier and speakers. Ensure they are secure and correctly polarized.
  • Verifiqueu el ampEl lificador està encès i la font d'entrada correcta està seleccionada.
  • Test with another audio source or ampvidador si és possible.
• So distorsionat:
  • Reduce the volume. Overdriving the speakers or ampEl lifer pot causar distorsió.
  • Check speaker cable integrity for any fraying or damage.
  • Assegureu-vos el amplifier's output power matches the speaker's recommended range.
• Imbalanced Sound (one speaker louder/quieter):
  • Check individual speaker connections for looseness or incorrect polarity.
  • Verificar amplifier balance settings.
  • Swap speaker cables at the amplifier to determine if the issue follows the speaker or the ampcanal lifier.
• Brunzit o taral·leig:
  • Ensure all components are properly grounded.
  • Move speaker cables away from power cables or other electrical interference sources.
  • Test different power outlets.

8. Especificacions

Detailed technical specifications for the Focal Aria K2 936 floorstanding loudspeaker:

Image: Detailed product data sheet for the Focal Aria K2 936, outlining key features and technical specifications.

9. Garantia i Suport

Focal products are designed and manufactured to the highest standards. Your Focal Aria K2 936 speaker comes with a limited warranty against defects in materials and workmanship.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Focal website. For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Focal dealer or Focal customer service directly.

Informació de contacte:

• Refer to your purchase documentation for dealer contact.
• Visit the official Focal website for global support contacts.