1. Introducció
The eventek KPS-1505D-303D is a high-precision, adjustable DC power supply designed for various electronic applications, including laboratory use, repair centers, and educational settings. This manual provides detailed instructions for the safe and efficient operation of your device. Please read this manual thoroughly before use and retain it for future reference.
2. Precaucions de seguretat
Per garantir un funcionament segur i evitar danys al dispositiu o lesions, si us plau, seguiu les següents pautes de seguretat:
- Always connect the power supply to a grounded AC outlet.
- No utilitzeu el dispositiu en mullat o damp condicions.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament. No bloquegeu el ventilador de refrigeració ni les reixetes de ventilació.
- No obriu la c.asing of the power supply unless you are a qualified service technician. There are no user-serviceable parts inside.
- Comproveu el voltage and current settings before connecting any circuit or load to prevent damage to the connected device.
- Avoid short-circuiting the output terminals for extended periods.
- Keep the device away from flammable materials and explosive gases.
3. Característiques del producte
The eventek KPS-1505D-303D DC Power Supply offers a range of features designed for precision and reliability:
- Adjustable DC Output: Provides a continuously variable output from 0 to 30 Volts and 0 to 5 Amperes.
- High Precision 4-Digit LED Display: Visualització clara i precisa del volumtage (0.01V resolution) and current (0.001A resolution), visible even in low light.
- Vol. Constanttage (CV) and Constant Current (CC) Modes: Automatic conversion between modes to maintain stable output voltage or current, indicated by front panel LEDs.
- Independent Adjustment Knobs: Separate coarse and fine adjustment knobs for both voltage and current allow for precise control.
- Sistema de refrigeració eficient: Features an integrated thermal sensor and a smart cooling fan to effectively dissipate heat and reduce operational noise.
- Múltiples funcions de protecció: Includes comprehensive safety features such as current limiting protection, thermal protection, overvoltage protection, short-circuit protection, and overload protection.
- Durable and Compact Design: Constructed with a flame-retardant casing for enhanced safety, lightweight portability, and high impact resistance.
4. Producte acabatview i Components
Familiarize yourself with the various parts of your eventek KPS-1505D-303D DC Power Supply.
Figura 1: Frontal view of the eventek KPS-1505D-303D DC Power Supply.
Figure 2: Explanation of the 4-digit LED display showing voltage, current, and power resolution.
Components del panell frontal
Figure 3: Detailed diagram of the power supply's front and rear panel components.
- Voltage Visualització
- Pantalla actual
- CV (Constant Voltage) Indicator
- CC (Constant Current) Indicator
- Power Display (Watts)
- A-COARSE (Rough Current Regulation Knob)
- A-FINE (Fine Current Regulation Knob)
- V-COARSE (Rough Voltage Regulation Knob)
- V-FINE (Fine Voltage Regulation Knob)
- Interruptor d'alimentació
- Output Interface Negative Electrode (-)
- GND (Ground Strap) Terminal
- Output Interface Positive Electrode (+)
Components del panell posterior
- Ventilador de refrigeració
- Presa d'entrada de CA
- Bloc de fusibles
5. Configuració
Segueix aquests passos per configurar la font d'alimentació:
- Desembalatge i inspecció: Carefully remove the power supply from its packaging and inspect it for any signs of damage during transit.
- Col·locació: Place the unit on a stable, level surface with sufficient space for ventilation, especially around the rear cooling fan.
- Connexió d'alimentació: Ensure the power switch (10) is in the OFF position. Connect the provided AC power cord to the AC Input Socket (15) on the rear panel, then plug the other end into a grounded AC power outlet.
- Comprovació inicial: Before connecting any load, turn on the power supply using the Power Switch (10). The LED displays should illuminate.
6. Instruccions de funcionament
This section details how to operate your eventek DC power supply.
6.1 Configuració Voltage i Actual
- Encès: Turn on the power supply using the Power Switch (10).
- Ajust Voltage: Use the V-COARSE (8) and V-FINE (9) knobs to set the desired output voltage. El voltage Display (1) will show the current setting.
- Ajust del límit de corrent: Use the A-COARSE (6) and A-FINE (7) knobs to set the maximum output current (current limit). It is recommended to set the current limit before connecting a load. To do this, you can temporarily short the output terminals (using a thick wire for a very brief moment, or by connecting a multimeter in current mode) and adjust the current knobs until the desired current limit is displayed. Alternatively, you can estimate the current limit based on your load's requirements.
6.2 Connecting a Load
- Ensure the power supply is OFF or the output is set to 0V before connecting your load.
- Connect the positive (+) terminal of your load to the red Output Interface Positive Electrode (13).
- Connect the negative (-) terminal of your load to the black Output Interface Negative Electrode (11).
- For applications requiring grounding, connect the ground wire of your load to the green GND (Ground Strap) Terminal (12).
6.3 Constant Voltage (CV) and Constant Current (CC) Modes
- Vol. Constanttage (CV) Mode: When the load current is below the set current limit, the power supply operates in CV mode, maintaining the set output voltage. The CV Indicator (3) will illuminate.
- Constant Current (CC) Mode: If the load current attempts to exceed the set current limit, the power supply automatically switches to CC mode. In this mode, the output current is maintained at the set limit, and the output voltage will drop accordingly. The CC Indicator (4) will illuminate.
7. Manteniment
Proper maintenance ensures the longevity and reliable operation of your power supply.
- Neteja: Always disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or liquids that could enter the casing.
- Ventilació: Regularly check that the cooling fan (14) and all ventilation openings are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.
- Substitució de fusibles: If the power supply fails to power on, the fuse may need replacement. Disconnect the AC power cord. Locate the Fuse Block (16) on the rear panel. Carefully remove the fuse holder and replace the fuse with one of the same type and rating (refer to the specifications section or the label near the fuse block).
Figura 4: Intern view highlighting the cooling system and components.
8. Solució De Problemes
Aquesta secció tracta els problemes habituals que podeu trobar i les seves possibles solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense corrent quan està encès | AC power cord not connected; Power switch off; Blown fuse | Check AC power cord connection; Ensure power switch is ON; Replace fuse (refer to Maintenance section) |
| Sense sortida voltage/actual | Output terminals not connected correctly; Current limit set too low; Load fault | Verify output connections; Adjust current limit (A-COARSE/A-FINE); Check the connected load for faults |
| Overheating/Fan running constantly | Blocked ventilation; Prolonged operation at high power; High ambient temperature | Ensure vents are clear; Reduce load or operating time; Operate in a cooler environment |
| Unstable output readings | Loose connections; Faulty load; External interference | Check all connections; Test with a different load; Relocate away from strong electromagnetic fields |
9. Especificacions
Key technical specifications for the eventek KPS-1505D-303D DC Power Supply:
- Model: KPS-1505D-303D
- Entrada Voltage: CA 220V ± 10%
- Vol. De sortidatage: 0-30V (ajustable)
- Corrent de sortida: 0-5A (Ajustable)
- Voltage Display Accuracy: 0.01 V
- Current Display Accuracy: 0.001A
- Dimensions (paquet): 29.4 x 20.3 x 11.8 cm
- Pes (paquet): 1.7 kg
- Fabricant: eventek
Figure 5: Physical dimensions of the power supply compared to common objects.
Figure 6: The power supply demonstrating professional high precision measurement capabilities.
10. Garantia i Suport
eventek is committed to providing quality products and customer satisfaction.
- Garantia: This product comes with a 24-month limited warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
- Atenció al client: For any questions, technical assistance, or warranty claims regarding your eventek KPS-1505D-303D DC Power Supply, please contact our support team at support@mokwheel.net. Please provide your model number and a detailed description of the issue when contacting support.
