1. Introducció
The Wilfa SMOOTH Blender BL-1000S is a powerful kitchen appliance designed for preparing a variety of beverages and food items, from smoothies to crushed ice. Equipped with a 1000-watt motor and a 1.5-liter glass jug, it offers efficient performance and durability.
Les característiques clau inclouen:
- Powerful 1000-watt motor for efficient blending.
- Robust 1.5-liter glass jug, resistant to impacts from hard ingredients.
- Three pre-set programs: Ice Crushing, Smoothie, and Interval.
- Specially designed blades for effective cutting and chopping, including ice.
- Pulse function for increased speed when needed.
- Automatic shut-off function after 10 minutes of inactivity for safety.
Image 1.1: The Wilfa SMOOTH Blender BL-1000S, fully assembled with its glass jug and control panel.
2. Components del producte
Before assembly, ensure all components are present and undamaged. The Wilfa SMOOTH Blender BL-1000S includes the following parts:
- Base del motor: Contains the 1000-watt motor and control panel.
- Glass Jug (1.5 Liters): El recipient principal de la barreja.
- Muntatge de la fulla: Integrated into the base of the glass jug, featuring four specialized blades.
- Tapa: Seals the glass jug during operation.
- Copa mesuradora: Small, removable cap in the lid for adding ingredients during blending.
Imatge 2.1: Una explosió view showing the motor base, glass jug, lid, and measuring cup as separate components.
Imatge 2.2: Una imatge de dalt a baix view of the four specialized blades located at the bottom of the glass jug.
3. Configuració
- Desembalar: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
- Neteja: Before first use, wash the glass jug, lid, and measuring cup with warm soapy water. Rinse thoroughly and dry. The motor base should only be wiped with a damp tela.
- Assemble the Jug: Assegureu-vos que el conjunt de fulles estigui ben fixat a la part inferior de la gerra de vidre.
- Place the Jug: Position the assembled glass jug onto the motor base. Rotate the jug clockwise until it locks securely into place. You should feel a click or firm resistance.
- Afegir ingredients: Place your desired ingredients into the glass jug. Do not exceed the maximum fill line (1.5 liters).
- Assegureu la tapa: Place the lid onto the glass jug and press down firmly to ensure a tight seal. Insert the measuring cup into the opening in the lid.
- Connectar l'alimentació: Connecteu la batedora a una presa de corrent adequada (220 V).
Image 3.1: The motor base of the blender, showing the control dial and program buttons. The dial is illuminated, indicating power is connected.
4. Instruccions de funcionament
The Wilfa SMOOTH Blender BL-1000S offers both manual speed control and pre-set programs for convenience.
4.1 Tauler de control acabatview
Image 4.1: Close-up of the blender's control panel, featuring the central dial and three program buttons: Pulse, Ice Crushing, and Smoothie.
- Dial central: Used to turn the blender ON/OFF and adjust manual speed from MIN to MAX.
- Botó PULSE: Provides short bursts of high-speed blending for quick chopping or mixing.
- ICE CRUSHING Button: Pre-set program optimized for crushing ice efficiently.
- SMOOTHIE Button: Pre-set program for achieving smooth and creamy smoothies.
4.2 Ús de programes preestablerts
After adding ingredients and securing the lid:
- Ensure the central dial is in the "OFF" position.
- Press the desired program button:
- ICE CRUSHING: Ideal for ice cubes or frozen fruits.
- SMOOTHIE: For blending fruits, vegetables, and liquids into a smooth consistency.
- The blender will run through its pre-programmed cycle and stop automatically.
- Per al INTERVAL program (for chopping frozen berries, etc.), select the appropriate setting on the dial if available, or use the Pulse function.
Image 4.2: The blender in operation, preparing a green smoothie. Ingredients like kiwi and lime are visible nearby.
4.3 Control manual de velocitat i funció d'impulsos
- Velocitat manual: Turn the central dial clockwise from "OFF" to "MIN" to start blending at the lowest speed. Continue turning towards "MAX" to increase the speed. Turn back to "OFF" to stop.
- Funció de pols: Press and hold the "PULSE" button for short bursts of maximum power. Release the button to stop. This is useful for chopping ingredients or achieving desired consistency.
Important: The blender features an automatic shut-off after 10 minutes of continuous operation to prevent overheating and ensure safety.
5. Manteniment i Neteja
Regular cleaning ensures optimal performance and extends the lifespan of your blender.
- Desconnectar: Desconnecteu sempre la batedora de la presa de corrent abans de netejar-la.
- Desmuntar: Carefully remove the glass jug from the motor base. Detach the lid and the measuring cup.
- Clean Glass Jug and Blades: The blades can be removed from the glass jug for thorough cleaning. Wash the glass jug, blade assembly, lid, and measuring cup with warm soapy water. Use a brush to clean around the blades carefully. Rinse all parts thoroughly and dry immediately.
- Base del motor neta: Netegeu la base del motor amb un anunciamp drap. No submergiu la base del motor en aigua ni en cap altre líquid.
- Taques obstinades: For stubborn stains in the jug, fill it with warm water and a drop of dish soap, then run the blender on a low setting for a few seconds. Rinse thoroughly.
- Emmagatzematge: Guardeu la batedora en un lloc net i sec.
Image 5.1: The glass jug with its removable blade assembly, illustrating how components can be separated for cleaning.
6. Solució De Problemes
If you encounter issues with your Wilfa SMOOTH Blender, refer to the following table for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La batedora no s'encén. | Not plugged in; jug not correctly assembled/locked; power outage. | Ensure power cord is securely plugged in. Check that the glass jug is correctly seated and locked onto the motor base. Verify power supply. |
| El motor funciona, però les pales no giren. | Blade assembly not properly attached to jug; ingredients jammed. | Unplug the blender. Check if the blade assembly is securely tightened to the jug. Remove any large or hard ingredients that may be jamming the blades. |
| La batedora s'atura durant el funcionament. | Overload protection activated; automatic shut-off after 10 minutes. | Reduce the amount of ingredients. If overloaded, unplug and let the motor cool down for 15-20 minutes before restarting. If it's the 10-minute auto-shutoff, simply restart. |
| Soroll o vibració forta. | Jug not seated correctly; hard ingredients; unstable surface. | Ensure the jug is securely locked onto the base. Reduce the amount of hard ingredients. Place the blender on a stable, flat surface. |
| Leaking from the bottom of the jug. | Conjunt de fulles no ajustat; segell danyat. | Unplug the blender. Ensure the blade assembly is tightly screwed onto the jug. Check the rubber seal for damage and replace if necessary. |
If the problem persists after trying these solutions, please contact Wilfa customer support.
7. Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | WILFA |
| Número de model | BL-1000S |
| Poder | 1000 watts |
| Voltage | 220 V |
| Capacitat | 1.5 litres (1500 mil·lilitres) |
| Material | Aluminium (base), Glass (jug) |
| Nombre de velocitats | 3 (pre-set programs) + Variable Manual Speed |
| Característiques especials | Pulse Technology, Multiple Speeds, Ice Crushing Program, Smoothie Program, Automatic Shut-off (after 10 minutes) |
| Pes | 4.3 quilos |
| Usos recomanats | Ice Crush, Smoothie, Chopping, Blending |
8. Garantia i Suport
Wilfa products are designed for quality and durability. This product comes with a 5 any de garantia des de la data de compra.
Image 8.1: Wilfa's 5-year warranty logo, indicating extended product assurance.
For warranty claims, technical support, or spare parts inquiries, please contact Wilfa customer service. Keep your proof of purchase for warranty validation.
You can find more information and contact details on the official Wilfa weblloc: www.wilfa.com