1. Introducció
This manual provides essential information for the safe and efficient operation of your CAMIPRO Carrier Digital Display Wall Mountable Voltage Stabilizer. This device is designed to protect your 2 Ton Inverter AC from voltage fluctuations, ensuring its longevity and optimal performance. Please read this manual thoroughly before installation and use.
2. Informació de seguretat
- Ensure the stabilizer is installed by a qualified technician to prevent electrical hazards.
- Do not open the stabilizer casing. No hi ha peces que l'usuari pugui reparar a l'interior.
- Keep the stabilizer away from water, moisture, and direct sunlight.
- Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- This stabilizer is specifically designed for Air Conditioners up to 2 Ton capacity. Do not connect other appliances.
- The unit features Intelligent Auto Restart with Microchip Low & High Auto Cut Off for enhanced safety against extreme voltage condicions.
3. Contingut del paquet
Upon opening the package, verify that the following item is included:
- CAMIPRO Carrier Digital Display Voltage Stabilizer (1 unit)
4. Configuració i instal·lació
The CAMIPRO Voltage Stabilizer is designed for wall mounting. Follow these steps for proper installation:
- Trieu una ubicació: Select a dry, well-ventilated area near your 2 Ton Inverter AC unit. Ensure the surface is sturdy enough to support the stabilizer's weight (approximately 8.24 kg).
- Muntatge: Securely mount the stabilizer to the wall using appropriate fasteners. Ensure it is level and stable.
- Connecteu l'alimentació d'entrada: Connect the main power supply to the stabilizer's input terminal. The operating voltage range for the input is 140V-270V. The product will automatically cut off power if the voltage falls outside this range.
- Connect AC Unit: Connect your 2 Ton Inverter AC unit to the stabilizer's output terminal. Ensure all connections are tight and secure.
- Encesa inicial: Once all connections are made, switch on the main power supply. The digital display on the stabilizer will illuminate, showing the current voltage.
Figura 4.1: Frontal view of the CAMIPRO Voltage Stabilizer, showing the digital display and branding.
Figura 4.2: lateral view of the CAMIPRO Voltage Stabilizer, illustrating its compact design and power connection point.
5. Instruccions de funcionament
The CAMIPRO Voltage Stabilizer operates automatically to protect your AC unit.
- Pantalla digital: The front digital display continuously shows the incoming voltage. This allows you to monitor the power supply to your AC.
- Volum automàtictage Reglament: The stabilizer automatically adjusts the output voltage to a safe range for your AC, even if the input voltage fluctuates between 140V and 270V.
- Vol alt/baixtage Tall: Si l'entrada voltage goes below 140V or above 270V, the stabilizer will automatically cut off the power supply to your AC to prevent damage.
- Reinici automàtic: Un cop el voltage returns to the safe operating range, the stabilizer will automatically restart and restore power to your AC after a short delay, ensuring continuous protection.
6. Manteniment
To ensure the longevity and optimal performance of your voltage stabilizer, follow these simple maintenance guidelines:
- Neteja: Periodically wipe the exterior of the stabilizer with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ventilació: Ensure that the ventilation openings on the stabilizer are not blocked by dust or other objects. Good airflow is crucial for heat dissipation.
- Connexions: Occasionally check that all power connections are secure and free from corrosion.
- Eviteu la sobrecàrrega: This stabilizer is rated for AC units up to 2 Ton. Do not connect appliances that exceed this capacity or other types of appliances.
7. Solució De Problemes
If you encounter issues with your CAMIPRO Voltage Stabilizer, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Stabilizer not turning on / Digital display is off. | No input power, loose connection, or internal fault. | Check the main power supply. Ensure all connections are secure. If the problem persists, contact customer support. |
| AC not receiving power / Stabilizer shows 'Hi' or 'Lo' cut. | Vol d’entradatage is outside the 140V-270V operating range. | This is normal operation. The stabilizer has cut off power to protect your AC. Power will be restored automatically once the voltage returns to a safe range. If the voltage remains outside the range for an extended period, contact your electricity provider. |
| Stabilizer is on, but AC is not working. | AC unit issue, or stabilizer output issue. | Check if the AC unit itself is powered on and functioning correctly. Ensure the connection between the stabilizer and AC is secure. If the stabilizer display shows a stable voltage but the AC doesn't work, the issue might be with the AC unit. |
| Unusual noise or smell from the stabilizer. | Problema amb el component intern. | Immediately disconnect power from the stabilizer and contact customer support. Do not attempt to repair it yourself. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | CAMIPRO |
| Nom del model | CAMIPRO Carrier Digital Display Wall Mountable 2 Ton Inverter AC Double Booster Voltage Estabilitzador |
| Usos recomanats per al producte | Home (specifically for 2 Ton AC) |
| Entrada Voltage Rang | 140 V - 270 V |
| AC Capacity Compatibility | Up to 2 Ton (Inverter AC) |
| Tipus de visualització | Digital |
| Característiques de seguretat | Intelligent Auto Restart, Microchip Low & High Auto Cut Off |
| Tipus de transformador | Toroidal Transformers (German technology) |
| Tipus de muntatge | Muntatge a la paret |
| Pes de l'article | 8 kg 240 g |
| Dimensions de l'article (LxWxH) | 32 x 14 x 22 centímetres |
| Components inclosos | Estabilitzador |
| Fabricant | Transportista Midea India Pvt. Ltd. |
9. Garantia i Suport
Your CAMIPRO VoltagL'estabilitzador ve amb un 2 anys de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació en condicions d'ús normal.
For warranty claims, technical support, or any inquiries regarding your product, please contact the manufacturer:
- Fabricant: Transportista Midea India Pvt. Ltd.
- Weblloc: www.carriermideaindia.com
Please retain your purchase receipt as proof of purchase for warranty services.
