MoKo RD9528A

MoKo RD9528A Travel Alarm Clock User Manual

Model: RD9528A

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your MoKo RD9528A Travel Alarm Clock. Please read this guide thoroughly to ensure proper use and to maximize the lifespan of your device.

MoKo RD9528A Travel Alarm Clock held in a hand

Image: The MoKo RD9528A Travel Alarm Clock, a compact square device, shown held in a hand to illustrate its small size.

Característiques del producte

  • Disseny compacte: Made from durable plastic with a classic square shape, suitable for various environments.
  • Funció de llum de fons: Features a soft yellow backlight for easy time viewing in low-light conditions. Activated by the LIGHT/SNOOZE button.
  • Easy Alarm Setting: Simple alarm switch on top for activation and deactivation. Alarm volume increases gradually in four stages.
  • Funció de posposar: A 5-minute snooze feature, activated by pressing the LIGHT/SNOOZE button.
  • Portabilitat: Mini, lightweight, and portable design, ideal for travel or placement in various rooms.
  • Funciona amb bateria: Operates on 1 AA battery (not included).

Configuració

Instal·lació de la bateria

  1. Localitzeu el compartiment de la bateria a la part posterior del rellotge.
  2. Gently slide open the battery compartment cover.
  3. Insert one AA battery, ensuring the positive (+) terminal is attached first, then the negative (-) terminal.
  4. Tanqueu bé la tapa del compartiment de la bateria.
Four-step diagram showing how to install an AA battery into the MoKo alarm clock

Image: A visual guide demonstrating the correct procedure for inserting an AA battery into the clock's battery compartment.

Note: The battery is not included with the clock.

Instruccions de funcionament

Establiment de l'hora

On the back of the clock, locate the Configuració de l'hora knob. Rotate this knob clockwise or counter-clockwise to adjust the clock hands to the current time.

Enrere view of MoKo alarm clock showing battery compartment, alarm switch, alarm setting knob, and time setting knob

Image: The rear panel of the alarm clock, highlighting the Time Setting knob and other controls.

Configuració de l'Alarma

  1. Localitza el Configuració d'alarma knob on the back of the clock.
  2. Gireu aquest botó per ajustar la maneta de l'alarma a l'hora de despertador desitjada.
  3. To activate the alarm, push the Interruptor d'alarma (located on the top of the clock) upwards.
  4. To deactivate the alarm, push the Interruptor d'alarma cap avall.
Diagram showing the alarm switch on the top of the MoKo alarm clock, with 'up' for ON and 'down' for OFF

Image: A diagram illustrating the alarm switch position for activating (up) and deactivating (down) the alarm function.

Funció de posposar

Quan soni l'alarma, premeu el botó LLUM / SNOOZE button located on the top right side of the clock face. This will temporarily silence the alarm for approximately 5 minutes before it sounds again.

MoKo alarm clock on a bedside table with a hand pressing the snooze button, and sleeping people in the background

Image: The alarm clock on a nightstand, demonstrating the action of pressing the LIGHT/SNOOZE button to activate the snooze feature.

Backlight Activation

To illuminate the clock face in the dark, press the LLUM / SNOOZE button. The soft yellow backlight will turn on, allowing you to view the time clearly at night. Release the button to turn off the backlight.

MoKo alarm clock with its backlight activated in a dark room, showing a hand pressing the light button

Image: The alarm clock displaying its soft yellow backlight in a dimly lit setting, activated by a user's finger.

Manteniment

  • Neteja: Wipe the clock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Substitució de la bateria: Replace the AA battery when the clock's performance diminishes or stops. Always dispose of used batteries responsibly.
  • Emmagatzematge: Si guardeu el rellotge durant un període prolongat, traieu la pila per evitar fuites.

Resolució de problemes

ProblemaCausa possibleSolució
Clock is not working or stops intermittently.Bateria baixa o gastada; bateria instal·lada incorrectament.Replace the AA battery with a new one. Ensure the battery is inserted with correct polarity (+/-).
L'alarma no sona.Alarm switch is in the OFF position; alarm time not set correctly; low battery.Push the Alarm Switch upwards to the ON position. Verify the alarm hand is set to the desired time. Replace the battery if needed.
La retroiluminació no funciona.Low battery; LIGHT/SNOOZE button not pressed firmly.Replace the AA battery. Ensure the LIGHT/SNOOZE button is pressed completely.
Loud ticking noise.This is a characteristic of some analog quartz movements.This is generally not a malfunction. If the noise is excessive or new, ensure the clock is on a stable surface.

Especificacions

CaracterísticaDetall
MarcaMoKo
Número de modelRD9528A
ColorNegre
Tipus de visualitzacióAnalògic
EstilClassic, Square
Característiques especialsAlarma, Snooze, Retroil·luminació
Font d'alimentacióAlimentat per piles (1 pila AA)
MaterialPlàstic
Dimensions (L x A x A)2.36 x 1.1 x 2.36 polzades (6 x 2.8 x 6 cm)
Pes de l'article1.41 unces (40 grams)
MoKo alarm clock with detailed dimensions: 2.36 inches width, 1.1 inches depth, 2.36 inches height

Image: The alarm clock shown with its precise measurements for length, width, and height.

Garantia i Suport

For warranty information or technical support, please refer to the retailer's return policy or contact MoKo customer service directly through their official website or the platform where the product was purchased. Please have your model number (RD9528A) and purchase details ready.

Documents relacionats - RD9528A

Preview Balisa Bluetooth MOKO H3: Fitxa tècnica i especificacions tècniques
Fitxa tècnica detallada del MOKO H3 Bluetooth Beacon, que inclou un acceleròmetre de 3 eixos, compatibilitat amb iBeacon/Eddystone, bateria de llarga durada i paràmetres configurables per a aplicacions IoT. Inclou característiques físiques, declaració de la FCC i assistència tècnica.
Preview Especificació del producte de la balisa Bluetooth MOKO L03 Anchor Pro
Especificació completa del producte per a la balisa Bluetooth MOKO L03 Anchor Pro, que detalla el maquinari, la instal·lació, el funcionament i la informació del paquet per als dispositius de rastreig de localització IoT de MOKO.
Preview MOKO LW007-PIR APP Guide: Configuration and Usage
Comprehensive guide to configuring the MOKO LW007-PIR LoRaWAN PIR motion detector using the MKLoRa mobile application. Covers device connection, parameter settings, and configuration examples for various scenarios.
Preview Guia de l'usuari de LW008-MTE - MOKO TECHNOLOGY LTD.
Guia d'usuari completa per al rastrejador LoRaWAN MOKO LW008-MTE. Aprèn sobre les característiques del producte, les especificacions, la instal·lació, la configuració de l'aplicació, els protocols de comunicació i la resolució de problemes.
Preview Guia de configuració de l'aplicació MOKO LW005-MP
Aquesta guia proporciona instruccions detallades sobre com configurar l'endoll intel·ligent MOKO LW005-MP LoRaWAN mitjançant l'aplicació MKLoRa. Cobreix la instal·lació, la connexió, els paràmetres LoRaWAN, la configuració general, la configuració del Bluetooth i la informació del dispositiu.
Preview Manual d'usuari de la passarel·la cel·lular MKGW4 - MOKO
Manual d'usuari complet per a la passarel·la mòbil MOKO MKGW4, que cobreix la configuració, l'estat dels LED, la configuració de xarxa i MQTT, l'escaneig BLE, el posicionament, la configuració del sistema i la resolució de problemes. Inclou informació de compliment de la normativa de la FCC.