Ikea 902.990.91

Ikea VIDGA Ceiling Bracket (4-Pack) Instruction Manual

Model: 902.990.91

1. Producte acabatview

The Ikea VIDGA Ceiling Bracket is designed for mounting VIDGA curtain rails directly to the ceiling, providing a clean and seamless appearance without visible screws. This package includes four white ceiling brackets, each with a height of 7 mm.

These brackets are suitable for supporting single or triple curtain rails and can also be used to create room dividers with curtains or fabric. The installation process is straightforward, requiring only one screw per bracket for secure attachment.

2. Informació de seguretat

3. Contingut del paquet

El paquet conté els elements següents:

Note: Mounting hardware (screws, wall plugs) is not included and must be purchased separately based on your ceiling material.

4. Configuració i instal·lació

Follow these steps to install your Ikea VIDGA Ceiling Brackets:

  1. Col·locació del pla: Determine the desired location for your curtain rail. For a 140 cm long rail, two ceiling or wall brackets are typically needed. For longer rail systems, add one additional bracket for every 140 cm of rail length.
  2. Marca els punts de perforació: Hold the bracket against the ceiling at the planned installation point. Use a pencil to mark the single drill hole. Ensure the marks are aligned for multiple brackets.
  3. Forats: Using an appropriate drill bit for your ceiling material, drill a hole at each marked point. If necessary, insert suitable wall plugs into the drilled holes.
  4. Fixeu el suport: Place the bracket over the drilled hole(s) and secure it with a screw. Tighten the screw firmly but do not overtighten. The bracket is designed for easy mounting with just one screw.
  5. Install Curtain Rail: Once all brackets are securely installed, attach your VIDGA curtain rail to the brackets. The design allows for the rail to be fitted without visible screws, ensuring a clean finish.
Ikea VIDGA Ceiling Bracket, white, showing the bracket and its components.

Image 1: The Ikea VIDGA Ceiling Bracket in white, illustrating its compact design and the single attachment point for ceiling installation.

5. Funcionament

The VIDGA Ceiling Brackets serve as fixed support points for your VIDGA curtain rail system. Once installed, they provide a stable base for hanging curtains or fabric panels. There are no operational controls for the brackets themselves; their function is purely structural.

6. Manteniment

To maintain the appearance and functionality of your ceiling brackets:

7. Solució De Problemes

8. Especificacions

MarcaIkea
Número de model902.990.91
ColorBlanc
Quantitat per paquet4 peces
Alçada7 mm
Material (Metal Part)Aluminum, epoxy/polyester powder coating
Material (Plastic Fastening)Reinforced polyamide plastic
Característiques especialsNo visible screws after installation
Dimensions del paquet15 x 5 x 3 cm
Pes del paquet20 g

9. Garantia i Suport

For information regarding warranty, returns, or product support, please refer to the official Ikea website or contact Ikea customer service directly. Keep your purchase receipt as proof of purchase.

Podeu trobar més informació i dades de contacte a la pàgina oficial d'Ikea. weblloc: www.ikea.com