MICHELIN 12294A

Michelin 12294A Digital Programmable Tire Pressure Gauge

Manual d'usuari

Introducció

Thank you for choosing the Michelin 12294A Digital Programmable Tire Pressure Gauge. This device is designed for accurate and convenient measurement of tire pressure, ensuring optimal vehicle performance and safety. Please read this manual thoroughly before use.

Contingut del paquet

  • 1 x Michelin 12294A Digital Programmable Tire Pressure Gauge
  • 2 x Lithium-metal batteries (pre-installed or included)
Michelin 12294A Digital Programmable Tire Pressure Gauge

Image: The Michelin 12294A Digital Programmable Tire Pressure Gauge, showing its digital display and control buttons.

Configuració

Instal·lació de la bateria

The device requires 2 Lithium-metal batteries. These are typically included or pre-installed. If replacement is needed:

  1. Locate the battery compartment cover, usually on the back or side of the unit.
  2. Obriu la tapa.
  3. Introduïu les piles, assegurant-vos la polaritat correcta (+/-).
  4. Tanqueu bé la tapa del compartiment de la bateria.

Encès/Apagat

  • Per encendre, premeu el botó Botó d'encesa (often marked with a circle and vertical line symbol).
  • The backlit LCD display will illuminate.
  • El dispositiu s'apagarà automàticament després d'un període d'inactivitat per estalviar bateria.

Instruccions de funcionament

Mesura de la pressió dels pneumàtics

  1. Ensure the tire is cold for the most accurate reading.
  2. Traieu el tap de la vàlvula del pneumàtic.
  3. Press the nozzle of the gauge firmly onto the tire valve stem. A good seal is crucial for an accurate reading.
  4. The digital display will show the tire pressure.
  5. Remove the gauge from the valve stem. The reading will hold on the display for a short period.
  6. Substituïu la tapa de la vàlvula.
Michelin 12294A Tire Pressure Gauge in use on a car tire

Image: The Michelin 12294A gauge being used to measure pressure on a car tire valve.

Canvi d'unitats de mesura

The gauge supports measurements in PSI, KPA, BAR, and kg/cm². To cycle through units, press the Botó d'unitat (often the same as the power button or a dedicated button). The current unit will be displayed on the screen.

Programming Tire Pressures

This gauge can be programmed with target front and rear tire pressures for up to two vehicles. Refer to your vehicle's owner's manual or the sticker on the driver's side door jamb for recommended tire pressures.

  1. With the gauge powered on, press and hold the Botó de programa (often an arrow button or a dedicated 'SET' button) until the programming mode is activated.
  2. Utilitza el Botons de fletxa amunt/avall to adjust the target pressure for the front tires of Vehicle 1.
  3. Premeu el botó Botó de programa again to switch to the rear tires of Vehicle 1, then adjust.
  4. Repeat the process for Vehicle 2 if desired.
  5. The gauge will save the settings automatically after a few seconds of inactivity or by pressing the Program button to exit.
Close-up of Michelin 12294A display showing current and target PSI

Imatge: Un primer pla view of the gauge's digital display, showing current pressure and programmable target pressure settings.

Using the Integrated Flashlight

The gauge features an integrated flashlight to assist in locating the tire valve in low-light conditions. To activate the flashlight, press the Botó de la llanterna (refer to device markings, often combined with another function or a dedicated button).

Using the Bleed Valve

If a tire is over-inflated, the built-in bleed valve allows for controlled release of air. While the gauge is attached to the valve stem and displaying pressure, gently press the Bleed Valve button (if present, often a small button near the nozzle) to release air until the desired pressure is reached.

Manteniment

  • Neteja: Wipe the gauge with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Emmagatzematge: Store the gauge in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Substitució de la bateria: If the display becomes dim or the device does not power on, replace the batteries. Dispose of old batteries according to local regulations.

Resolució de problemes

Problema Causa possible Solució
No display/Device does not power on Piles gastades o instal·lades incorrectament. Comproveu la polaritat de la bateria o substituïu les bateries.
Lectura inexacta Poor seal with valve stem; tire not cold; gauge malfunction. Ensure a firm, airtight seal. Measure when tires are cold. If issues persist, contact support.
Air leaks when measuring Gauge not properly seated on valve stem. Press the gauge firmly and squarely onto the valve stem.

Especificacions

Marca MICHELIN
Número de model 12294A
Nom del model Manòmetre
Pes del producte 100 g
Dimensions del producte 9.3 x 3.3 x 2 cm
Bateries 2 bateria de liti-metall (inclosa)
Unitats de mesura PSI, KPA, BAR, kg/cm²
Precisió +/- 1%
Material Metal core, ribbed plastic exterior
Tipus de fil Schrader

Garantia i Suport

This Michelin product is manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Michelin automotive accessories weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Documents relacionats - 12294A

Preview Guia de l'usuari de l'inflador de pneumàtics programable d'alt rendiment Michelin de 12 V
Comprehensive user guide for the Michelin 12V High Performance Programmable Tyre Inflator, covering operating features, specifications, safety instructions, inflation modes, and troubleshooting. Learn how to inflate car, motorcycle, and bicycle tires, as well as sports balls.
Preview Gràfics d'inflat de pneumàtics Michelin per a ús de caravanes i camions
Taules detallades de càrrega i inflat de Michelin per a diverses mides de pneumàtics per a autocaravanes i camions, incloent-hi informació sobre PSI, capacitats de càrrega i pressió lateral. Aquest document proporciona dades essencials per a la selecció i el manteniment adequats dels pneumàtics.
Preview Guia de l'usuari de l'inflador programable d'alta pressió Michelin
Guia d'usuari completa per a l'inflador programable d'alta pressió Michelin, que detalla les especificacions, els components, les instruccions d'ús per a l'inflat de pneumàtics i els elements de baixa pressió, la resolució de problemes i el manteniment.
Preview Requisits d'ús dels pneumàtics Michelin IWSC GTP Indianapolis: butlletí tècnic MMTB-IWSC-2025-17
El butlletí tècnic de Michelin Motorsport MMTB-IWSC-2025-17 proporciona els requisits essencials d'ús dels pneumàtics per a la sèrie IWSC GTP a Indianapolis. Aquest document detalla les pressions i els ajustos de camber recomanats per als pneumàtics llisos davanters i posteriors per a un rendiment òptim, juntament amb les directrius del TPMS i les condicions de funcionament dels pneumàtics per mullat.
Preview Recomanacions d'ús, manteniment i inspecció dels pneumàtics Michelin Metro
Aquest butlletí tècnic de Michelin proporciona recomanacions essencials per a l'ús, el manteniment i la inspecció dels pneumàtics MICHELIN® Metro. Cobreix la pressió d'inflat, el paper dels enginyers de camp de Michelin, els límits màxims de quilometratge (LOC) i els procediments de manteniment dels pneumàtics per garantir un rendiment i una longevitat òptims per a les aplicacions metropolitanes.
Preview Manual del propietari i garantia limitada dels pneumàtics Michelin per a passatgers i camions lleugers
Manual complet del propietari i informació sobre la garantia limitada per a pneumàtics Michelin per a turismes i camions lleugers, que cobreix la cobertura, les exclusions, el manteniment, la seguretat i les reclamacions.