Dual DT 450 Turntable Instruction Manual

Introducció

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Dual DT 450 manual turntable. Designed for optimal audio quality, this belt-driven turntable features a high-quality wooden housing, a balanced tonearm with adjustable tracking force, and an integrated switchable phono pre-amplifier. Please read these instructions carefully before using your turntable to ensure proper function and longevity.

Producte acabatview

The Dual DT 450 turntable is engineered to deliver an exceptional vinyl listening experience. Its robust construction and thoughtful features ensure stable playback and clear sound reproduction.

Característiques principals:

• Disseny: High-quality wooden housing for stable operation and a puristic aesthetic.
• Flexibilitat: Connects to traditional HiFi systems via phono or AUX input; supports two speeds (33/45 RPM).
• pre-ampmés viu: Built-in switchable phono pre-amplifier for easy connection.
• Magnetic Pickup System: Features an Audio Technica AT 3600 cartridge with pre-set tracking force and a damped elevació del braç.
• Accessoris inclosos: Turntable unit, platter with drive belt, counterweight, platter mat, dust cover, center puck, and user manual.

Producte Views:

En general view of the Dual DT 450 Turntable with its dust cover.

Detallada view of the Audio Technica AT 3600 magnetic pickup system on the tonearm.

The Dual DT 450 Turntable with its transparent dust cover in the open position.

The Dual DT 450 Turntable with its transparent dust cover in the closed position, protecting the platter and tonearm.

Guia de configuració

Follow these steps to correctly set up your Dual DT 450 turntable.

1. Desembalatge: Carefully remove all components from the packaging. Ensure all accessories listed in the product overview estan presents.
2. Col·locació: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
3. Platter and Belt Installation: Place the platter onto the spindle. Carefully install the drive belt around the inner rim of the platter and around the motor pulley.
4. Counterweight Installation: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced and floats freely. Then, adjust the counterweight to the recommended tracking force (refer to cartridge specifications, typically around 2-3 grams for the AT3600).
5. Ajust antipatinatge: Set the anti-skating dial to match the tracking force you set. This helps prevent the stylus from skipping across the record.
6. Dust Cover Installation: Attach the dust cover hinges to the rear of the turntable unit.
7. Connexió d'alimentació: Connecteu l'adaptador de corrent a l'entrada de CC de la part posterior del tocadiscos i, a continuació, endolleu-lo a una presa de corrent.
8. Connexió d'àudio: Connect the RCA cables from the turntable to your amplifier or receiver. Use the PHONO input if your amplifier has one and switch the turntable's internal pre-amplifier to 'OFF'. If your amplifier only has AUX/LINE inputs, switch the turntable's internal pre-amplifier to 'ON' and connect to an available AUX/LINE input. Ensure the ground wire is connected to your amplifier's ground terminal if available.

Vídeo de demostració de configuració:

Instruccions de funcionament

Once your Dual DT 450 is set up, follow these steps to play your vinyl records.

1. Encès: Turn the power switch to the 'ON' position. The platter will begin to rotate.
2. Registre del lloc: Carefully place your vinyl record onto the platter. If playing a 45 RPM single, use the included center puck.
3. Seleccioneu la velocitat: Choose the correct playback speed (33 or 45 RPM) using the speed selector switch.
4. Elevació del braç: Utilitzeu la palanca d'elevació del braç per aixecar el braç.
5. Posició del braç: Moveu suaument el braç sobre el solc inicial desitjat del disc.
6. Braç inferior: Slowly lower the tonearm using the tonearm lift lever. The stylus will descend onto the record, and playback will begin.
7. Ajustar el volum: Ajusta el volum del teu dispositiu connectat amplificador o receptor al nivell d'escolta desitjat.
8. Aturant la reproducció: At the end of the record, or when you wish to stop, use the tonearm lift lever to raise the tonearm, then return it to its rest. Turn the power switch to 'OFF'.

Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del tocadiscs.

• Funda antipols: Clean the dust cover with a soft, dry cloth. Avoid abrasive cleaners that may scratch the surface.
• Cura del stylus: Gently clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front. A dirty stylus can degrade sound quality and damage records.
• Neteja de discos: Keep your records clean to prevent dust and debris from accumulating on the stylus and affecting playback. Use a dedicated record cleaning brush or solution.
• Neteja general: Wipe the turntable chassis with a soft, slightly damp tela. No utilitzeu productes químics durs.
• Inspecció del cinturó: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain accurate playback speed.

Resolució de problemes

If you encounter issues with your Dual DT 450, refer to the following common problems and solutions:

Especificacions tècniques

Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your product or visit the official Dual weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.