Introducció
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.
Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
Informació de seguretat
La seguretat del vostre fill és primordial. Seguiu sempre aquestes pautes:
- Llegeix totes les instruccions: Ensure you understand all assembly and usage instructions before using the product.
- Inspecció periòdica: Reviseu periòdicament tots els cargols, perns i elements de fixació per assegurar-vos que estiguin ben ajustats. No feu servir el bressol si hi falta alguna peça, està danyada o trencada.
- Mattress Safety: Feu servir només un matalàs que faci com a mínim 69 cm per 131 cm amb un gruix que no superi els 15 cm. El matalàs ha d'encaixar perfectament sense espais.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Seguretat de la taula per canviar canvis: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- Perill d'asfixia: Keep small parts, plastic bags, and packaging materials away from children.
- Certificacions: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.
Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
Llista de components
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)
Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
Configuració
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- Desempaquetar components: Carefully remove all parts from the packaging and verify against the components list.
- Assemble Crib Frame: Fixeu els rails laterals al capçal i al peu del llit amb els elements de fixació proporcionats.
- Instal·lar el suport del matalàs: Secure the mattress support base at the desired height. There are three adjustable height options.
- Assemble Changing Table: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
Instruccions de funcionament
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Changing Table Use
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.
Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
Conversions
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- Llit per a nens petits: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- Llit de dia: Remove the front crib rail. No guardrail is used for the daybed configuration.
- Llit de mida completa: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.
Image: A visual representation of the four conversion stages: crib, toddler bed, daybed, and full-size bed with headboard.
Manteniment
To maintain the quality and safety of your Graco Benton Crib and Changer:
- Neteja: Neteja les superfícies amb l’anunciamp drap. Eviteu productes de neteja abrasius o productes químics forts que puguin danyar l'acabat o els materials.
- Emmagatzematge: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- Maquinari: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
Resolució de problemes
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- Estructura tambaleant: Ensure all bolts and screws are fully tightened. Re-check assembly steps to confirm correct part placement.
- Els calaixos no llisquen suaument: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- Dificultat amb les conversions: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- Peces que falten: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 04586-64B |
| Color | Negre |
| Dimensions del producte (L x A x A) | 73.2" x 29.8" x 41.7" |
| Pes de l'article | 98 lliures |
| Material | Fusta de pi, fusta dissenyada i materials compostos de fusta |
| Maximum Child Height (Crib Stage) | 35 polzades (89 cm) |
| Maximum Weight (Toddler/Daybed) | 50 lliures |
| Certificacions | Certificació GREENGUARD Gold, certificació JPMA |
| UPC | 081877503177 |
Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
Vídeo oficial del producte
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
Garantia i Suport
The Graco Benton 4-in-1 Convertible Crib and Changer is backed by a Garantia limitada d'1 any contra defectes de fabricació. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Weblloc: Visita el Storkcraft Brand Store per a informació de contacte i preguntes freqüents.
- Telèfon: Refer to the contact details provided in your product packaging or on the official Storkcraft weblloc.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.
