Adcraft BDCF-9 Chest Freezer User Manual

1. Informació important de seguretat

Please read all instructions carefully before operating this appliance to ensure safe and efficient use. Retain this manual for future reference.

• Assegureu-vos que el congelador estigui correctament connectat a terra.
• No emmagatzemeu substàncies explosives com ara llaunes d'aerosol amb un propulsor inflamable en aquest aparell.
• Mantenir les obertures de ventilació lliures d'obstruccions.
• No utilitzeu dispositius mecànics o altres mitjans per accelerar el procés de descongelació, diferents dels recomanats pel fabricant.
• No danyeu el circuit de refrigerant.
• Aquest aparell està pensat per a ús comercial.

2. Producte acabatview

The Adcraft BDCF-9 is an 8.7 cubic feet chest freezer designed for commercial food storage. It features a hinged lid, manual temperature control, and a durable construction.

3. Instruccions de configuració

3.1 Desembalatge

1. Remove all packaging materials, including tape and protective film.
2. Inspect the freezer for any shipping damage. Report any damage immediately to your supplier.
3. Remove the wire coated basket and any internal packing materials.

3.2 Col·locació

• Place the freezer on a firm, level surface capable of supporting its weight when fully loaded.
• Ensure adequate ventilation around the unit. Maintain a minimum of 4 inches (10 cm) clearance from walls and other objects on all sides.
• Avoid placing the freezer in direct sunlight or near heat sources such as ovens, radiators, or heating vents.
• The built-in casters allow for easier positioning, but ensure the unit is stable once placed.

3.3 Neteja inicial

Before first use, clean the interior and exterior of the freezer with a mild detergent and warm water. Rinse thoroughly and dry completely.

3.4 Connexió d'alimentació

• Connect the freezer to a dedicated 115V/60Hz/1-phase electrical outlet. The unit is equipped with a NEMA 5-15P plug.
• No utilitzeu cables d'extensió ni endolls adaptadors.
• Allow the freezer to stand upright for at least 2 hours before plugging it in to allow refrigerants to settle.

3.5 Inici inicial

After plugging in, the freezer will begin to cool. Allow the unit to operate for 4-6 hours empty to reach its operating temperature range of -4°F to -10°F before loading with food items.

4. Instruccions de funcionament

4.1 Control de temperatura

The BDCF-9 features manual temperature control. Locate the thermostat dial, typically on the front or side of the unit. Turn the dial to adjust the desired temperature within the range of -4°F to -10°F. A lower number on the dial usually indicates a colder setting.

4.2 Llums indicadors

The control panel includes indicator lights to show the operational status of the freezer:

• Llum de potència: Illuminates when the freezer is connected to power.
• Llum de funcionament: Illuminates when the compressor is actively cooling.

4.3 Càrrega del congelador

• Do not overload the freezer. Allow space for air circulation around items.
• Use the provided wire coated basket for organizing smaller or frequently accessed items.
• Ensure the hinged lid is closed securely after each use to maintain temperature and energy efficiency.

5. Manteniment

5.1 Descongelació

This freezer requires manual defrosting. Defrost when the frost layer on the interior walls reaches approximately 1/4 inch (6 mm) thick.

1. Desendolleu el congelador de la presa de corrent.
2. Traieu tots els aliments i guardeu-los en un altre congelador o nevera.
3. Open the drain plug located at the bottom of the freezer. Place a shallow pan or towel underneath the drain to collect water.
4. Leave the lid open to allow frost to melt naturally. Do not use sharp objects or heating elements to speed up defrosting, as this can damage the unit.
5. Once all frost has melted, clean the interior with a mild detergent and warm water.
6. Tanqueu el tap de drenatge de manera segura.
7. Plug the freezer back in and allow it to cool for several hours before returning food items.

5.2 Neteja

• Exterior: Wipe the white powder-coated steel exterior with a damp drap i detergent suau. Assecar bé.
• Interior: Clean regularly with a solution of baking soda and water (2 tablespoons baking soda to 1 quart water) to neutralize odors. Rinse and dry.
• Junta: Netegeu la junta de la porta regularment per assegurar-ne un segellat hermètic.

6. Solució De Problemes

Abans de contactar amb el servei tècnic, torneu aview els següents problemes i solucions habituals:

7. Especificacions

8. Garantia i Suport

For warranty information or technical support, please contact Adcraft customer service. Keep your purchase receipt and model number readily available when contacting support.

Fabricant: Adcraft

Data de primera disponibilitat: 12 de març de 2019