BRESSER Temeo Quadro Temperature Station User Manual

Introducció

The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.

Informació de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar el dispositiu.
• Conserveu aquest manual com a referència futura.
• No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
• Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.

Contingut del paquet

• 1x BRESSER Temeo Quadro Main Display Unit
• 3x Remote Sensors
• 1x Manual d'usuari (aquest document)

Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.

Producte acabatview

Unitat de visualització principal

Imatge: Davant view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.

Imatge: posterior view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.

• Pantalla LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
• CHANNEL Button: Selects which remote sensor's data is displayed or cycles through channels.
• Botó ALARMA: Activates/deactivates temperature/humidity alarms.
• Botó MAX/MIN: Mostra els valors màxims i mínims enregistrats.
• Botó SET: Entra en el mode de configuració per als ajustos d'hora, data i alarma.
• Compartiment de la bateria: Located on the rear, for 3x AAA batteries.
• Suport integrat: For desktop placement.

Sensor remot

Imatge: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.

• Pantalla LCD: Shows its current temperature and humidity.
• Canvi de canal: Allows selection of channel 1, 2, or 3.
• Compartiment de la bateria: For 2x AAA batteries.
• Forat de muntatge: Per muntatge a la paret.

Configuració

1. Instal·lació de la bateria

1. For Remote Sensors:
   • Open the battery compartment cover on the back of each remote sensor.
   • Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
   • Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
   • Tanqueu la tapa del compartiment de la bateria.
2. For Main Display Unit:
   • Obriu la tapa del compartiment de la bateria a la part posterior de la unitat principal.
   • Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
   • Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.

2. Emparellament de sensors

• After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
• Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
• The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
• If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.

3. Col·locació

• Place the main unit indoors in a central location, away from direct sunlight or heat sources.
• Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.

Instruccions de funcionament

Viewtemperatura i humitat

• The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
• The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.

MAX/MIN Records

• Premeu el botó MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
• Premeu el botó MAX/MIN button a second time to display the minimum temperature and humidity recorded.
• To clear the MAX/MIN records, press and hold the MAX/MIN button for approximately 3 seconds while MAX or MIN values are displayed.

Selecció de la unitat de temperatura (°C/°F)

• On the main unit, press the SET button to toggle between Celsius (°C) and Fahrenheit (°F).

Setting Alarms (if applicable)

• Premeu el botó ALARMA botó per entrar al mode de configuració d'alarma.
• Utilitza el CANAL i MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
• Premeu ALARMA again to confirm settings and activate the alarm. An alarm icon will appear on the display.
• When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.

Manteniment

• Neteja: Netegeu el dispositiu amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Substitució de la bateria: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Emmagatzematge: Si guardeu el dispositiu durant un període prolongat, traieu totes les piles per evitar fuites.

Resolució de problemes

Especificacions

Garantia

This BRESSER product comes with a garantia de dos anys against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

Suport

For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER weblloc web per obtenir les dades de contacte més actualitzades.

Online resources may include FAQs, additional manuals, and contact forms.