Introducció
El SurgeX ESP SEQ-1U és un 20 Amp/120V power sequencer and conditioner designed to protect and manage power for sensitive audio/video systems. It ensures proper power-up and power-down sequences, preventing damaging pops, hissing sounds, and excessive inrush currents. This manual provides essential information for the safe and effective operation of your SEQ-1U unit.
Informació de seguretat
ADVERTIMENT:
- No exposeu la unitat a la pluja o la humitat.
- No obriu la c.asing; no hi ha peces a l'interior que l'usuari pugui reparar. Demaneu totes les tasques de manteniment a personal de servei qualificat.
- Assegureu-vos de posar a terra adequadament per evitar descàrregues elèctriques.
- Desconnecteu l'alimentació abans de fer qualsevol connexió o realitzar tasques de manteniment.
- Aquesta unitat està dissenyada només per a ús en interiors.
Producte acabatview
Panell frontal
Figure 1: Front Panel of the SurgeX ESP SEQ-1U
The front panel of the SEQ-1U features the SurgeX brand logo and model number. A central LCD display shows the unit's status, including voltage (e.g., "STATUS: ALL OFF 118V") and protection status (e.g., "PROTECTION: GOOD"). To the left of the display, a key switch with associated lock icons provides security. On the right, "SEL" and "ADJ" buttons are used for navigation and adjustment, alongside a prominent blue "POWER" button.
Característiques clau
- 20 Amp/120V Power Sequencer/Conditioner
- Adjustable 0-40 Second Sequence Delay
- 2 Always-on Outlets
- 3 Sequence Banks
- 8-outlet total capacity
- Advanced surge elimination
- Filtratge EMI/RFI
- Extrem voltage protecció
Configuració
Muntatge en bastidor
The SEQ-1U is designed for standard 19-inch rack mounting. Secure the unit using appropriate rack screws (not included) to ensure stability. Allow adequate ventilation around the unit.
Connexió d'alimentació
- Ensure the main power switch on the SEQ-1U is in the OFF position.
- Connect the unit's power cord to a dedicated 20 Amp, 120V AC power outlet.
- Verify that the power source is stable and within the specified voltage gamma.
Equips de connexió
The SEQ-1U features two always-on outlets and three sequenced banks, each with two outlets.
- Connect equipment that requires constant power (e.g., network routers, media servers) to the "Always On" outlets.
- Connect equipment that should power on/off in a specific order (e.g., pre-amplificadors, poder amplifiers, projectors) to the sequenced outlets (Banks 1, 2, and 3).
- Refer to your system's specific power-up/down requirements to determine the correct sequencing order for your devices.
Instruccions de funcionament
Encès/Apagat
- Insert the key into the key switch on the front panel and turn it to the "ON" position.
- Press the blue "POWER" button. The unit will begin its power-up sequence, activating the sequenced banks with the configured delays.
- To power off, press the blue "POWER" button again. The unit will initiate the power-down sequence in reverse order.
- For complete power disconnection, turn the key switch to the "OFF" position and/or unplug the unit from the wall outlet.
Adjusting Sequence Delay
The SEQ-1U allows adjustment of the delay between sequenced banks (0-40 seconds).
- Use the "SEL" button to navigate through menu options on the LCD display.
- Use the "ADJ" button to modify the selected value (e.g., sequence delay time).
- Consult the on-screen prompts for specific instructions on saving your custom settings in non-volatile memory.
Informació de la pantalla LCD
The LCD display provides real-time status updates:
- ESTAT: Indicates the current state of the outlets (e.g., "ALL OFF", "BANK 1 ON") and the input voltage.
- PROTECCIÓ: Displays the status of the surge protection (e.g., "GOOD", "FAULT").
Manteniment
- Neteja: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosols.
- Ventilació: Ensure that ventilation openings are not blocked. Proper airflow is crucial for preventing overheating.
- Gestió de cables: Keep power cables neatly organized and away from signal cables to prevent interference.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén. | No power from wall outlet; key switch in OFF position; tripped circuit breaker. | Check wall outlet with another device; ensure key switch is ON; reset circuit breaker. |
| Equipment not powering on in sequence. | Incorrect connection to outlets; sequence delay set too long/short; unit in bypass mode. | Verify connections to sequenced banks; adjust sequence delay; ensure unit is in normal operating mode. |
| "PROTECTION: FAULT" displayed. | Internal protection circuit activated due to severe surge. | Disconnect all equipment, power cycle the unit. If fault persists, contact SurgeX support. |
Especificacions
- Model: SEQ-1U
- Entrada Voltage: 120 V AC
- Capacitat actual: 20 Amp
- Punts de venda: 8 (2 Always-on, 6 Sequenced in 3 banks)
- Sequence Delay: Ajustable 0-40 segons
- Dimensions (L x A x A): 21.7 x 15.05 x 6.7 polzades
- Pes: 16.65 lliures
- Tipus de material: coure
- Protecció contra sobretensions: Advanced Series Mode® surge elimination
- Filtrat: Filtratge EMI/RFI
Garantia i Suport
For warranty information, technical support, or service inquiries, please contact SurgeX customer service. Refer to the official SurgeX website or your purchase documentation for the most current contact details and warranty terms.
Recursos en línia: Visit the SurgeX official weblloc web per a preguntes freqüents, registre de productes i materials de suport addicionals.
