Introducció
The JiBen LED Lighted 10X Magnifying Makeup Mirror is designed to enhance your daily beauty and grooming routines. Featuring powerful 10X magnification, bright diffused LED lighting, and a versatile 360-degree rotating adjustable arm, this portable and cordless mirror provides exceptional clarity and convenience for home and travel use.
Davant view of the JiBen LED Lighted 10X Magnifying Makeup Mirror, showcasing its illuminated ring and sleek design.
Informació de seguretat
Please read and understand all safety information before using the mirror.
- PRECAUCIÓ: Handle with care to avoid breakage.
- Do not disassemble or attempt to replace LEDs.
- Use only 3 AAA batteries.
- Mantenir fora de l'abast dels nens a causa del perill d'asfíxia.
- Ensure proper mounting on non-porous surfaces to prevent falling.
- Prolonged exposure to LED lights may cause discomfort for some users.
Contingut del paquet
- 1 x JiBen LED Lighted 10X Magnifying Makeup Mirror
- 1 x Power Locking Suction Cup Assembly
Configuració
Instal·lació de la bateria
The mirror requires 3 AAA batteries (not included) for the LED light function.
- Locate the battery compartment on the back of the mirror unit.
- Obriu la tapa del compartiment de la bateria.
- Introduïu 3 piles AAA, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
posterior view of the mirror, showing the battery compartment and the JiBen logo.
Instruccions de muntatge
The mirror features a powerful locking suction cup for secure attachment to smooth, non-porous surfaces such as glass, tile, or polished metal.
- Prepara la superfície: Ensure the mounting surface is absolutely smooth and flat. Clean the surface thoroughly to remove any dust, dirt, or moisture.
- Unlock the Suction Cup: Twist the base of the suction cup assembly counter-clockwise to unlock the suction mechanism.
- Col·loca el mirall: Press the suction cup firmly against the desired clean, smooth surface.
- Bloqueja la ventosa: While maintaining pressure, twist the base of the suction cup assembly clockwise until it is securely locked in place. You should feel a strong suction.
Visual guide for twisting the suction cup base to lock and unlock the mirror.
Detailed diagram illustrating the two steps for securing the suction cup: unlock counter-clockwise, then lock clockwise.
Instruccions de funcionament
Turning On/Off the LED Light
The mirror features an energy-efficient LED light ring for optimal illumination.
- To turn the LED light on or off, simply tap the button located on the bottom front edge of the mirror face.
Adjusting the Mirror Angle
The 360-degree rotating swivel arm allows you to adjust the mirror to your best viewangle de ing.
- Gently pivot the mirror head to achieve the desired tilt and rotation. The ball joint is designed to be smooth yet secure, holding its position once set.
A user adjusting the mirror for optimal viewing in a bathroom setting.
Òptima Viewing Distance for 10X Magnification
The 10X magnification is very strong and requires close proximity for a clear, undistorted image.
- For best results and a clear, undistorted image, position your face within 5 inches (approximately 12.7 cm) of the mirror surface.
Diagram illustrating the recommended viewing distance of less than 5 inches for the 10X magnifying mirror.
Manteniment
Neteja del mirall
To keep your mirror clean and clear:
- Wipe the mirror surface and body with a soft, lint-free, damp tela.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the mirror's finish or LED components.
Manteniment de la ventosa
To ensure the suction cup maintains its strong hold:
- Periodically (e.g., monthly), remove the mirror from its mounting surface.
- Clean both the suction cup and the mounting surface thoroughly.
- Re-mount the mirror following the "Mounting Instructions" in the Setup section. This process helps prevent loss of suction over time.
Resolució de problemes
| Problema | Possible causa/solució |
|---|---|
| Magnifying image appears distorted. | The 10X magnification is very strong. Ensure your face is within 5 inches of the mirror for a clear, undistorted image. |
| Suction cup does not hold or loses suction. |
|
| El llum LED no s'encén. |
|
Especificacions
| Característica | Detall |
|---|---|
| Número de model | M002 |
| Ampliació | 10X |
| Font de llum | LED |
| Font d'alimentació | 3 piles AAA (no incloses) |
| Dimensions del producte | 8"L x 1"W (Mirror diameter approx. 5.5") |
| Material del marc | Vidre |
| Tipus de muntatge | Power Locking Suction Cup |
| Ajustabilitat | 360-Degree Rotating Swivel Arm |
Diagram indicating the mirror's dimensions, including overall width and mirror surface diameter.
Garantia i Suport
JiBen products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or customer service, please refer to the contact details provided on the product packaging or visit the official JiBen weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
