1. Introducció
This manual provides essential instructions for the installation, operation, and maintenance of your APC Back-UPS BX600C-IN. This Uninterruptible Power Supply (UPS) system is designed to provide power backup and surge protection for home office equipment, desktop PCs, and other home electronics, ensuring continuous operation during power outages and protecting against voltage fluctuacions.
2. Informació important de seguretat
Please read and understand these instructions carefully before installing or operating the UPS. Failure to follow these instructions can result in serious injury or equipment damage.
⚠ ADVERTIMENT: RISC DE DESCÀCTICA ELÈCTRICA
- Do not remove the cover. Hazardous live parts inside this UPS are present even when the unit is disconnected from the mains.
- Demani el servei només a personal qualificat.
- Assegureu-vos de posar a terra correctament la presa de corrent.
- Do not connect non-computer related items like hair dryers, vacuum cleaners, or other high-power appliances to the battery backup outlets.
Always disconnect the UPS from the power source before performing any maintenance or service.
3. Contingut del paquet
The APC Back-UPS BX600C-IN package should contain the following items:
- APC Back-UPS BX600C-IN Unit
- Manual d'usuari (aquest document)
Inspect the package upon receipt. Notify the carrier and dealer if there is any damage.
4. Producte acabatview
4.1. Característiques clau
- Disseny compacte: Line Interactive UPS with a load capacity of 360 Watts / 600VA.
- Battery Backup & Surge Protection: Three 6A, 2/3 Pin output Indian Power Sockets provide battery backup and surge protection.
- Volum automàtictage Regulació (AVR): Corrects incoming voltage fluctuations within a wide range of 145-290V.
- Bateria: Equipped with a 1x7.2Ah battery, offering 20-75 minutes of backup time depending on the load.
- Generator Compatible: Designed to work with generators.
- Low Power Load Compatibility: Suitable for devices like Wi-Fi routers and DSL modems.
- Cold Start Capability: Allows the UPS to power on using only battery power.
- Càrrega ràpida: Recharges the battery in 4-6 hours.
- Funcionament silenciós: Maintains quiet operation during transfer from mains to generator power.
4.2. Tauler frontal
Figura 1: Davant view of the APC Back-UPS BX600C-IN. This image displays the power button, battery indicator, and surge protection indicator on the front panel.
- Botó d'encesa: Controla l'encesa/apagada del SAI.
- Indicador de bateria: Shows battery status (charging, on battery, low battery).
- Indicador de protecció contra sobretensions: Illuminates when surge protection is active.
4.3. Panell posterior
Figura 2: posterior view of the APC Back-UPS BX600C-IN. This image shows the three battery backup and surge protected outlets, the input power cord, and ventilation grilles.
- Bateria de reserva i preses de corrent protegides contra sobretensions: Three 6A, 2/3 Pin Indian standard outlets for connecting critical equipment. These outlets provide power during outages i protegir contra sobretensions.
- Cable d'alimentació d'entrada: Connects the UPS to the utility power outlet.
- Reixes de ventilació: Ensure proper airflow for cooling.
5. Instruccions de configuració
- Col·locació: Place the UPS in a cool, dry location, away from direct sunlight, excessive heat, or moisture. Ensure adequate ventilation around the unit.
- Càrrega inicial de la bateria: Connect the UPS to a grounded wall outlet using the attached power cord. Allow the unit to charge for at least 8 hours before connecting any equipment. This ensures optimal battery runtime.
- Connexió d'equips:
- Connect your computer, monitor, and other critical devices (e.g., Wi-Fi router, modem) to the Còpia de seguretat de la bateria i punts de venda protegits contra sobretensions on the rear of the UPS.
- Do not overload the UPS. The total wattage of connected equipment should not exceed 360 Watts.
- Encès: Press the power button on the front panel to turn on the UPS. The power indicator will illuminate.
Assegureu-vos que totes les connexions estiguin ben connectades abans d'engegar els dispositius.
6. Instruccions de funcionament
6.1. Turning the UPS On/Off
- Encendre: Press and hold the power button on the front panel until a beep is heard. The power indicator will light up.
- Apagar: Press and hold the power button until a beep is heard and the power indicator turns off.
6.2. Understanding Indicators and Alarms
| Indicator/Alarm | Descripció |
|---|---|
| Power Indicator (Green LED) On | UPS is providing power to connected equipment. |
| Power Indicator (Green LED) Flashing | El SAI funciona amb bateria. |
| Audible Alarm (Beeping) | Indicates the UPS is operating on battery power. Beeps more frequently as battery charge depletes. |
| Continuous Alarm / Red Indicator | Indicates low battery, overload, or a fault condition. |
| Surge Protection Indicator On | Surge protection is active and functioning. |
6.3. Volum automàtictagReglament (AVR)
The UPS automatically corrects minor voltage fluctuations (sags and surges) without switching to battery power, extending battery life. If the voltage fluctuation is too severe or prolonged, the UPS will switch to battery power.
6.4. Cold Start Function
The cold start feature allows you to power on the UPS and connected equipment using only battery power, even if there is no utility power available. To perform a cold start, ensure the UPS is off, then press and hold the power button until the unit powers on.
7. Manteniment
7.1. Battery Care and Replacement
The UPS contains a sealed, maintenance-free lead-acid battery. The battery is designed for a service life of 3-5 years under normal operating conditions. Factors like frequent power outages, high temperatures, and deep discharges can reduce battery life.
- Tipus de bateria: The UPS uses one 12V battery.
- Substitució: Battery replacement should only be performed by qualified service personnel. Refer to the safety information before attempting any service.
- Eliminació: Batteries must be recycled properly. Contact your local recycling center or APC for disposal information.
7.2. Neteja
Netegeu periòdicament l'exterior del SAI amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i deixalles.
8. Solució De Problemes
This section provides solutions to common issues you might encounter with your UPS. If the problem persists, contact APC customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| El SAI no s'encén. |
|
|
| UPS beeps frequently or continuously. |
|
|
| Short backup time. |
|
|
| UPS makes chattering noises. |
|
|
9. Especificacions tècniques
| Característica | Detall |
|---|---|
| Model | BX600C-IN |
| Capacitat | 600 VA / 360 W |
| Entrada Voltage Rang | 145-290V AC |
| Vol. De sortidatage | 230 V AC |
| Freqüència de sortida | 47 - 63 Hz (Sync to mains) |
| Temps de transferència | 10 ms típic, 12 ms màxim |
| Tipus de bateria | 1 x 12V, 7.2Ah Sealed Lead-Acid |
| Temps de recàrrega típic | 4-6 hores |
| Backup Time (Typical) | 20 - 75 minutes (load dependent) |
| Punts de venda | 3 x 6A, 2/3 Pin Indian Sockets (Battery Backup & Surge Protected) |
| Dimensions (A x A x P) | 23.7 x 10.7 x 21.8 cm |
| Pes | 4.69 kg |
| Temperatura de funcionament | De 0 °C a 40 °C (32 °F a 104 °F) |
10. Garantia i Suport
APC provides a comprehensive warranty for this product.
- Període de garantia: The APC Back-UPS BX600C-IN comes with a 2 any de garantia covering parts and labor, including the battery.
- Contacte amb l'assistència: For technical assistance, warranty claims, or service inquiries, please contact APC customer support. Refer to the official APC website or your purchase documentation for the most current contact information in your region.
- Fabricant: SCHNEIDER ELECTRIC IT BUSINESS INDIA PRIVATE LIMITED.
Si us plau, conserveu el comprovant de compra per motius de garantia.
