IKEA BlaviK LED Wall Lamp amb el manual d'usuari del mirall

1. Introducció

This manual provides essential information for the safe and efficient use of your IKEA BlaviK LED wall lamp with mirror. Please read these instructions carefully before installation and use, and retain them for future reference.

The IKEA BlaviK is a battery-operated LED wall lamp featuring an integrated magnifying mirror, designed for use in humid environments such as bathrooms. It offers adjustable lighting and an automatic shut-off function for energy saving.

2. Informació de seguretat

• Seguretat de la bateria: Always use the correct type and size of batteries (3 x HR6/AA). Ensure batteries are inserted with correct polarity (+ and -). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
• Medi ambient: This product is tested and approved for use in humid environments (IP44 rated), such as bathrooms. However, avoid direct water spray onto the lamp.
• Font de llum LED: The LED light sources in this product are non-replaceable. Do not attempt to open or modify the lamp.
• Muntatge: Ensure the wall surface is suitable for mounting and can support the weight of the lamp. Use appropriate screws and wall plugs for your wall type (screws are not included).

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació:

• IKEA BlaviK LED Wall Lamp unit with integrated mirror
• Manual d'instruccions (aquest document)

Nota: Wall mounting screws and batteries (3 x HR6/AA) are not included and must be purchased separately. IKEA recommends LADDA rechargeable batteries.

4. Configuració i instal·lació

4.1. Inserció de la bateria

1. Locate the battery compartment on the lamp unitat.
2. Obriu la tapa del compartiment de la bateria.
3. Insert 3 x HR6/AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Tanqueu bé la tapa del compartiment de la bateria.

4.2. Muntatge a la paret

1. Choose a suitable location on the wall, ensuring it is clean and dry.
2. Marqueu els punts de muntatge desitjats a la paret.
3. Drill holes if necessary and insert appropriate wall plugs (not included).
4. Assegureu la lamp to the wall using suitable screws (not included). Ensure the lamp is firmly attached and stable.

This image displays the IKEA BlaviK LED wall lamp, highlighting its compact design, white casing, and the flexible arm that allows for light direction adjustment. The integrated mirror is visible on the lampla cara de.

5. Instruccions de funcionament

• Encès/apagat: El lamp can be switched on and off manually using the integrated switch.
• Apagat automàtic: For energy saving, the lamp features a 15-minute automatic shut-off function.
• Ajust de llum: The flexible arm allows you to adjust the direction of the light as needed, providing targeted illumination.
• Mirall d'augment: Utilize the integrated magnifying mirror for tasks such as shaving or applying makeup.

6. Manteniment

To ensure the longevity and optimal performance of your IKEA BlaviK lamp, follow these cleaning instructions:

• Netegeu la lamp superfície amb adamp tela.
• For more thorough cleaning, use a mild detergent on the damp tela.
• After cleaning, dry the lamp completament amb un drap net i sec.
• Do not use abrasive cleaners or solvents, as these can damage the product's finish.

7. Solució De Problemes

• Lamp no s'encén:
  • Comproveu si les piles estan inserides correctament amb la polaritat correcta.
  • Ensure the batteries are not exhausted; replace or recharge them if necessary.
  • Verify the manual switch is in the 'ON' position.
• La llum és tènue:
  • Pot ser que les piles estiguin baixes. Substituïu-les o recarregueu-les.
• L'apagat automàtic no funciona:
  • Assegureu-vos que lamp is not being manually overridden.
  • Check battery levels, as low batteries might affect timer functions.

8. Especificacions

9. Garantia i Suport

For information regarding warranty, returns, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.