Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Focal 165 V20 6.5" 70W RMS Polyglass Series 2-Way Component Speakers System. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.
Instruccions de seguretat
Observe the following safety precautions to prevent damage to the speakers or injury to yourself:
- Instal·lació professional recomanada: For best results and to avoid damage, professional installation is highly recommended.
- Maneig de potència: Do not exceed the maximum power handling of 140W (70W RMS) to prevent speaker damage.
- Cablejat: Ensure all wiring is correctly connected according to the diagrams provided. Incorrect wiring can lead to malfunction or damage.
- Medi ambient: Avoid exposing speakers to excessive moisture, extreme temperatures, or direct sunlight. This product is not waterproof.
- Muntatge segur: Ensure all components are securely mounted to prevent detachment during vehicle operation.
- Nivells de volum: Prolonged exposure to high volume levels can cause hearing damage. Adjust volume responsibly.
Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Speaker drivers (woofers and tweeters)
- Crossovers
- Reixes
- Maquinari de muntatge
Image: Complete Focal 165 V20 component speaker system, including woofers, tweeters, crossovers, and grilles.
Configuració i instal·lació
Proper installation is crucial for optimal sound quality. Consider professional installation if you are unfamiliar with car audio wiring and mounting.
1. Muntatge dels altaveus de greus
- The 6.5-inch woofers require a mounting depth of approximately 2.8 inches.
- Choose a suitable location in your vehicle, typically door panels, ensuring adequate clearance and structural integrity.
- Use the provided mounting hardware to secure the woofers firmly.
Imatge: Primer pla view of the Focal 165 V20 6.5-inch woofer with its protective grille.
2. Instal·lació del tweeter
- The tweeters feature an Aluminum/Magnesium Inverted Dome design.
- Install tweeters in a location that provides optimal sound staging, such as dashboard corners or A-pillars.
- Utilize the included mounting hardware for flush or surface mounting options.
Image: Two Focal 165 V20 inverted dome tweeters, showing their compact design.
3. Connecting the Crossovers
- The system includes 2-way separate crossovers with a 6/12 dB/Octave slope at 4.5kHz.
- Connect the input from your amplifier to the 'INPUT' terminals on the crossover.
- Connect the woofer to the 'WOOFER' terminals and the tweeter to the 'TWEETER' terminals.
- Ensure correct polarity (+ to + and - to -) for all connections.
- Mount the crossovers in a dry, accessible location, away from heat sources.
Image: The Focal 165 V20 2-way separate crossover, showing input and output terminals for woofer and tweeter.
Instruccions de funcionament
Once installed, connect your Focal 165 V20 speakers to a compatible amplifier. The system is designed to handle a nominal power of 70W RMS and a maximum power of 140W. Adjust amplifier settings, such as gain and equalization, to achieve desired sound quality. Start with low volume and gradually increase to prevent damage to the speakers or your hearing.
Manteniment
To ensure the longevity and performance of your speakers:
- Neteja: Use a soft, dry cloth to clean the speaker grilles and cones. Avoid using harsh chemicals or abrasive materials.
- Inspecció: Periodically check all connections for tightness and ensure no wires are frayed or exposed.
- Protecció del medi ambient: Protect speakers from direct exposure to water, dust, and extreme temperatures.
Resolució de problemes
Si teniu problemes, consulteu els següents problemes i solucions habituals:
- Sense so:
- Comproveu totes les connexions de cablejat des del amplifier to the crossovers and speakers.
- Verifiqueu el ampel lifier està encès i funciona correctament.
- Ensure the audio source is active and properly connected.
- So distorsionat:
- Baixeu el nivell de volum; sovint es produeix distorsió a volums excessivament alts.
- Comproveu amplifier gain settings; ensure they are not set too high.
- Inspeccioneu els cons dels altaveus per detectar qualsevol dany físic.
- Un altaveu no funciona:
- Check the specific speaker's wiring and crossover connections.
- Swap the non-working speaker with a working one (if possible) to determine if the issue is with the speaker or the wiring/ampcanal lifier.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Focal |
| Número de model | 165 V20 |
| Tipus d'altaveu | Component |
| Mida de l'altaveu | 6.5 polzades |
| Potència nominal (RMS) | 70 watts |
| Potència de sortida màxima | 140 watts |
| Diàmetre del woofer | 6.5 polzades |
| Profunditat de muntatge | 2.8 polzades |
| Tipus de Tweeter | Aluminum/Magnesium Inverted Dome |
| Tipus de crossover | 2-Way Separate Crossover: 6/12 dB/Oct (4.5kHz) |
| Tecnologia de connectivitat | Coaxial (for connection type, though speakers are component) |
| Components inclosos | Speaker drivers, crossovers, grilles, mounting hardware |
| Pes de l'article | 8 lliures |
| Nivell de resistència a l'aigua | No resistent a l'aigua |
Garantia i Suport
The Focal 165 V20 Component Speakers System comes with a limited warranty provided by the manufacturer, Focal. For specific warranty terms, duration, and conditions, please refer to the documentation included with your purchase or visit the official Focal website. For technical support, service, or warranty claims, please contact Focal customer service directly.
Fabricant: Focal
