HACH 9531200

Manual d'usuari del provador de TDS de rang baix Hach 9531200 Pocket Pro

Hach 9531200 Pocket Pro Low Range TDS Tester showing display and buttons.

An image of the Hach 9531200 Pocket Pro Low Range TDS Tester. The device is dark grey and blue, with a clear LCD screen displaying '735' and '23.9°C'. Below the screen are three blue buttons: an up arrow with a lock icon, a middle button with a snowflake-like symbol, and a power button with a circular arrow.

Introducció

The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.

Què hi ha a la caixa

  • Hach Pocket Pro Low Range TDS Tester
  • 4 piles AAA
  • Corda
  • Solució de calibratge
  • Guia d'inici ràpid

Característiques clau

  • Confidence in results
  • Estalvieu temps i diners
  • Facilitat d'ús

Configuració

Instal·lació de la bateria

  1. Locate the battery compartment cover on the back of the tester.
  2. Traieu la coberta.
  3. Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
  4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Calibració inicial

For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.

Instruccions de funcionament

Encès/Apagat

Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.

Prendre una mesura

  1. Ensure the tester is clean and dry before use.
  2. Immerse the probe end of the tester into the sampla solució, assegurant-vos que el sensor estigui completament submergit.
  3. Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
  4. Record the measurement as needed.
  5. Rinse the probe with distilled water after each measurement to prevent cross-contamination.

Comprensió de la pantalla

The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.

Manteniment

Neteja de la sonda

Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.

Canvi de bateria

When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.

Emmagatzematge

Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.

Resolució de problemes

Lectures inexactes

  • Ensure the probe is clean and free of debris.
  • Perform a calibration using fresh calibration solution.
  • Check for air bubbles around the probe during measurement.
  • Comproveu el sample temperature is within the operating range.

No Display/Power Issues

  • Check if batteries are correctly installed and have sufficient charge. Replace if necessary.
  • Assegureu-vos que la coberta del compartiment de la bateria estigui ben tancada.

Temps de resposta lent

  • Clean the probe thoroughly.
  • Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.

Especificacions

AtributValor
Número de model9531200
MarcaHACH
Tipus de mesuraMesurador de TDS
Font d'alimentacióFunciona amb bateria
Piles necessàries4 piles AAA (incloses)
Pes de l'article9.6 unces
Dimensions del paquet8.74 x 4.72 x 2.36 polzades
FabricantHach
Data de primera disponibilitat16 de desembre de 2014

Garantia i Suport

Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach weblloc.

For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.

Documents relacionats - 9531200

Preview How to Reprogram Hach DR-3000 for Accu-TEST COD Vials
Instructions and services for reprogramming the Hach DR-3000 spectrophotometer or colorimeter to use Bioscience, Inc.'s accu-TEST COD vials. Includes support and reprogramming service details from Bioscience, Inc.
Preview Guia d'instal·lació de LXZ525.99.00002 SC4500
Instruccions d'instal·lació concises per al controlador Hach SC4500, que cobreixen el muntatge, el cablejat intern, el segellat de la carcassa i la configuració final. Inclou informació multilingüe sobre els components.
Preview Guia de configuració del control PID de sortida mA Hach SC4500
Instruccions d'usuari per configurar el control PID de sortida de mA al controlador Hach SC4500, incloent-hi els paràmetres d'afinació PID, les opcions de configuració i els procediments de manteniment.
Preview Manual d'usuari del controlador Hach SC4500: guia d'instal·lació, funcionament i manteniment
Aquest manual d'usuari complet proporciona informació detallada sobre el controlador Hach SC4500, incloent-hi especificacions, procediments d'instal·lació, guia operativa, instruccions de manteniment i consells per a la resolució de problemes. Essencial per als usuaris de l'instrument analític SC4500.
Preview Manual d'usuari del sensor d'ozó ORBISPHERE Model C1100 | Hach
Manual d'usuari del sensor d'ozó Hach ORBISPHERE model C1100. Proporciona informació detallada sobre la instal·lació, el calibratge, el manteniment, la resolució de problemes i les especificacions tècniques per a una mesura precisa de l'ozó en aplicacions industrials i de laboratori.
Preview Manual d'usuari bàsic de Hach DR 3900
Un manual d'usuari complet per a l'espectrofotòmetre Hach DR 3900, que cobreix les seves especificacions, informació de seguretat, instal·lació, funcionament i resolució de problemes. Aquesta guia proporciona detalls essencials per als usuaris d'aquest instrument de laboratori avançat.