Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your InSinkErator Instant Hot Water Tank, Model HWT-00. Please read all instructions carefully before use.
The InSinkErator HWT-00 Instant Hot Water Tank is designed to provide near-boiling water (approximately 200 degrees F inside the tank) directly at your kitchen sink. This 2/3-gallon stainless steel tank features an easily adjustable thermostat and a 750-watt heating element for quick and convenient hot water access.
Informació important de seguretat
ADVERTÈNCIA: aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- No toqueu superfícies calentes. Utilitzeu nanses o poms.
- Per protegir-se de les descàrregues elèctriques, no submergiu el cable, els endolls o l'aparell en aigua o altres líquids.
- És necessària una supervisió estreta quan qualsevol aparell és utilitzat per o a prop dels nens.
- Desendolleu la presa de corrent quan no utilitzeu i abans de netejar. Deixeu refredar abans de posar o treure peces.
- No feu servir cap aparell amb un cable o un endoll danyats o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera. Torneu l'aparell al centre de servei autoritzat més proper per examinar-lo, reparar-lo o ajustar-lo.
- L'ús d'accessoris no recomanats pel fabricant de l'aparell pot causar lesions.
- No utilitzar a l'aire lliure.
- No deixeu que el cable pengi de la vora de la taula o del taulell, ni toqui superfícies calentes.
- No col·loqueu-lo sobre o prop d'un cremador de gas o elèctric calent, ni en un forn calent.
- Connecteu sempre primer l'endoll a l'aparell i després el cable a la presa de corrent. Per desconnectar-lo, gireu qualsevol control a la posició "off" i, a continuació, retireu l'endoll de la presa de corrent.
- No utilitzeu l'aparell per a un altre ús que el previst.
Què hi ha a la caixa
Your InSinkErator Instant Hot Water Tank package includes:
- 2/3-Gallon Stainless Steel Instant Hot Water Tank (HWT-00)
Note: Faucet and water filtration system are sold separately.
Configuració i instal·lació
The InSinkErator HWT-00 is designed for easy DIY installation under your sink. Ensure you have a standard under-sink outlet available for the tank's power cord.
Passos d'instal·lació acabatsview:
- Prepara la zona: Clear the under-sink cabinet space. Ensure access to cold water supply and a grounded electrical outlet.
- Muntar el tanc: Securely mount the tank in an upright position within the under-sink cabinet. The tank features tool-free connections for convenience.
- Connecteu les línies d'aigua: Connect the cold water supply line to the tank's inlet. Connect the hot water outlet from the tank to your instant hot water faucet (sold separately). Ensure all connections are secure to prevent leaks.
- Instal·lar l'aixeta (si escau): If installing a new faucet, follow the faucet's specific instructions. The HWT-00 is compatible with all InSinkErator instant hot water faucets.
- Connectar l'alimentació: Once all water connections are secure and the tank is filled with water, plug the tank's power cord into the standard under-sink outlet. The unit includes dry start protection.
- Netegeu el sistema: Before first use, flush the system according to the faucet's instructions to remove any air and ensure proper operation.
Visual Guide: Installation Components

Image: The InSinkErator HWT-00 Instant Hot Water Tank, showcasing its compact design suitable for under-sink installation.

Image: A close-up of the InSinkErator HWT-00 tank, highlighting its adjustable temperature dial for precise heat control.
Instruccions de funcionament
Your InSinkErator HWT-00 Instant Hot Water Tank is designed for simple operation, providing near-boiling water on demand.
Ajust de temperatura:
- The tank features an easily adjustable thermostat. Locate the temperature control knob on the front of the tank.
- Turn the knob to adjust the desired water temperature. The manufacturer's recommended setpoint is approximately 200 degrees F for optimum performance.
- Allow a few minutes for the water to reach the newly set temperature after adjustment.
Distribució d'aigua calenta:
- To dispense hot water, activate your compatible InSinkErator instant hot water faucet (sold separately) according to its specific operating instructions.
- The tank will continuously supply near-boiling water as long as the faucet is activated, up to its 2/3-gallon capacity.
Ús Examples:

Image: A person filling a teapot with hot water from an instant hot water faucet, demonstrating its use for hot beverages.

Image: A person preparing a baby bottle with hot water from an instant hot water faucet, highlighting its convenience for quick tasks.

Image: A person filling a cooking pot with hot water from an instant hot water faucet, illustrating its use for accelerating cooking processes.

Image: A person cleaning a bowl with hot water from an instant hot water faucet, showing its utility for cleaning and sanitizing.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your InSinkErator Instant Hot Water Tank.
Water Filter Compatibility:
- The HWT-00 tank is compatible with InSinkErator under-sink water filtration systems (sold separately).
- Using a compatible filter can help reduce contaminants like PFOA/PFOS, herbicides, pesticides, VOCs, lead, mercury, asbestos, chlorine, and more, improving water taste and quality.
- Refer to your filter system's instructions for recommended replacement schedules, typically every 6 months.
Resolució de problemes
If you encounter issues with your InSinkErator Instant Hot Water Tank, please refer to the following common troubleshooting tips:
- Sense aigua calenta:
- Check if the unit is plugged into a working electrical outlet.
- Ensure the temperature control knob is set to a desired hot temperature.
- Verify that the water supply valve to the tank is fully open.
- Allow sufficient time for the tank to heat water, especially after initial setup or if the tank was recently drained.
- Aigua no prou calenta:
- Ajusteu el botó de control de temperatura a una posició més alta.
- Ensure the tank is not being overused, which might temporarily reduce water temperature.
- Fuga:
- Check all water connections for tightness. Ensure they are hand-tightened and then given an additional quarter turn with a wrench.
- Inspect hoses for any visible damage or kinks.
- If a filter is installed, ensure it is correctly seated and not leaking.
- Flux d'aigua lent:
- If a water filter is installed, it might be clogged and require replacement.
- Check the water supply valve for full opening.
If problems persist, please contact InSinkErator customer support for assistance.
Especificacions
| Característica | Detall |
|---|---|
| Marca | InSinkErator |
| Número de model | HWT-00 |
| Dimensions del producte | 6.75 cm d'amplada x 10.88 cm d'alçada |
| Capacitat | 2/3 Gallon (0.67 Gallons) |
| Material | Dipòsit d'acer inoxidable |
| Wattage | 750 watts |
| Voltage | 115 Volts |
| Temperatura màxima | 210 graus Fahrenheit |
| Tipus de muntatge | Internal (under-sink) |
| Característica especial | Adjustable Temperature, Dry Start Protection, Filter Compatible |
| Pes de l'article | 5.7 lliures |
Garantia i Suport
Your InSinkErator Instant Hot Water Tank is backed by a 3-Year "We Come to You" Limited Warranty. For full details, please refer to the product warranty documentation included with your purchase or visit the official InSinkErator weblloc.
For technical support, troubleshooting assistance, or warranty claims, please contact InSinkErator customer service.





