1. Introducció
The Hager 5300 Series Grade 1 Heavy Duty Surface Door Closer is engineered for demanding environments such as schools, hospitals, and high-traffic commercial buildings. Constructed from a durable aluminum alloy, this door closer provides reliable and smooth door control. Its design facilitates straightforward installation and maintenance, contributing to the security and functionality of your facility.
2. Informació de seguretat
- Llegiu atentament totes les instruccions before installation and operation. Failure to follow instructions may result in injury or product damage.
- Vesteix adequat equips de protecció individual (EPI), including safety glasses, during installation.
- Ensure the door and frame are structurally sound and capable of supporting the door closer's weight and operational forces.
- No intenteu modificar el tancaportes. Les modificacions no autoritzades poden comprometre la seguretat i anul·lar la garantia.
- Mantingueu els nens i les mascotes allunyats de la zona d'instal·lació.
- Exercise caution when adjusting the spring tension, as springs are under pressure.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Hager 5300 Series Door Closer Body
- Standard Tri-Pack Arm (Parallel, Regular, and Top Jamb configurations)
- Maquinari d'instal·lació (cargols, suports, etc.)
- Manual d'instruccions (aquest document)
Image 1: Typical package contents for the Hager 5300 Series Door Closer. Actual contents may vary slightly.
4. Configuració i instal·lació
The Hager 5300 Series door closer offers versatile multi-mount installation options, including parallel arm, regular arm, and top jamb configurations. The installation type is screw-in. Refer to the specific template provided with your closer for precise hole drilling and mounting instructions.
4.1. Passos generals d'instal·lació
- Prepareu la porta i el marc: Ensure the mounting surfaces are clean, flat, and reinforced if necessary.
- Select Mounting Position: Determine the appropriate mounting configuration (regular, parallel, or top jamb) based on door swing and desired appearance.
- Marqueu els forats de perforació: Use the provided template to accurately mark the locations for drilling pilot holes on the door and frame.
- Perforar forats pilot: Drill pilot holes to the recommended depth and diameter for the mounting screws.
- Muntar el cos del tancament: Fixeu el cos del tancaportes a la porta o al marc amb els cargols proporcionats.
- Install the Arm Assembly: Attach the main arm to the closer spindle and the forearm to the frame or door bracket, depending on the chosen configuration. Ensure all connections are tight.
- Ajust inicial: Perform initial adjustments as described in Section 5 to ensure the door closes smoothly and latches correctly.
Imatge 2: Ex.ample diagram showing a regular arm installation. Refer to your specific template for detailed instructions.
5. Funcionament i ajust
The Hager 5300 Series door closer features adjustable spring sizes from 2 to 6, allowing for customization to various door weights and sizes. Adjustment valves are staked to prevent accidental removal, ensuring consistent performance.
5.1. Spring Power Adjustment
The spring power determines the closing force of the door. To adjust:
- Locate the spring adjustment nut on the end of the closer body.
- Turn the nut clockwise to increase closing force (for heavier doors or higher wind conditions).
- Turn the nut counter-clockwise to decrease closing force (for lighter doors or easier opening).
- Precaució: Do not over-tighten or loosen the spring adjustment nut beyond recommended limits. Refer to the closer body markings for safe adjustment range.
5.2. Closing Speed Adjustment
The door closer typically has two or three adjustment valves to control different phases of the closing cycle:
- Main Closing Speed Valve: Controls the speed of the door from its fully open position to approximately 10-15 degrees from closed.
- Latching Speed Valve: Controls the speed of the door for the final 10-15 degrees of closing, ensuring the door latches securely.
- Backcheck Valve (if present): Provides hydraulic resistance when the door is opened forcefully beyond a certain point, protecting the door and frame.
To adjust any valve, turn it clockwise to decrease speed (slower closing) or counter-clockwise to increase speed (faster closing). Make small adjustments (quarter turns) and test the door's operation after each adjustment.
Image 3: Location of typical adjustment valves on the Hager 5300 Series door closer body.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Hager 5300 Series door closer. The tempered springs, made of double heat-treated steel, contribute to its durability.
- Inspecció periòdica: Annually inspect the door closer for any signs of wear, damage, or loose fasteners. Check the arm assembly, mounting screws, and closer body.
- Neteja: Wipe down the closer body and arm with a soft, damp drap per eliminar la pols i la brutícia. Eviteu productes de neteja o dissolvents abrasius.
- Lubricació: The internal components are factory-lubricated and sealed. No additional lubrication is typically required. If the arm pivots squeak, a small amount of silicone-based lubricant can be applied to the pivot points.
- Re-adjustment: If the door's closing speed or force changes over time, re-adjust the valves as described in Section 5.
- Apretar els elements de fixació: Periodically check and tighten all mounting screws and arm assembly fasteners to ensure they are secure.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La porta es tanca de cop | Closing speed or latching speed set too fast. | Turn the main closing speed and/or latching speed valves clockwise (slower). |
| Door closes too slowly or doesn't latch | Closing speed or latching speed set too slow; insufficient spring power. | Turn the main closing speed and/or latching speed valves counter-clockwise (faster). Increase spring power if necessary. |
| Door is hard to open | Spring power set too high. | Decrease spring power by turning the spring adjustment nut counter-clockwise. |
| Fuga d'oli | Damaged seals; closer body cracked. | Contact Hager support. The closer may need replacement. |
| Door closer noisy | Loose fasteners; worn arm components. | Check and tighten all mounting screws and arm connections. Lubricate arm pivots if needed. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 145676 |
| Marca | Hager |
| Sèrie | Sèrie 5300 |
| Material | Alumini |
| Acabar | Sprayed Aluminum / Satin Aluminum |
| Grau | Grau 1 (Resistent) |
| Talla de primavera | Adjustable 2 to 6 |
| Tipus de muntatge | Multi-Mount (Parallel, Regular, Top Jamb) |
| Tipus d'instal·lació | Cargol |
| Pes de l'article | 8.7 lliures (3.95 kg) |
| Dimensions del producte | 15" de llargada x 8" d'amplada x 3.5" d'alçada (38.1 cm x 20.3 cm x 8.9 cm) |
| Certificacions | BHMA Certified ANSI A156.4, UL/cUL Listed for up to 3 hours |
| Components inclosos | Maquinari d'instal·lació |
9. Garantia i assistència
For specific warranty information regarding your Hager 5300 Series Door Closer, please refer to the documentation provided at the time of purchase or visit the official Hager website. Hager Companies stands behind the quality of its products.
For technical support, replacement parts, or further assistance, please contact Hager customer service through their official channels. When contacting support, please have your model number (145676) and purchase details readily available.
Fabricant: Hager Companies
